Genius mechanical guy repairs and restores A twenty years old rusty police van

Рет қаралды 681,445

Күн бұрын

Пікірлер: 206

@BarryRudge 6 ай бұрын

My first surprise was having the correct break down truck to remove the van. I was expecting a donkey cart. In the west we consider many parts taken from such a truck to be just scrap but in Pakistan there is always a man who can repair no matter what it is. Even broken light lenses

@GridnetGaming 29 күн бұрын

yeah no matter how much these car companies make breakable cars, pakistan will know how to reuse and reuse and fix and make new, no new parts needed.

@RobertHatfull-df4ch 5 ай бұрын

Its great how everything is rebuilt knowledge hand tools and manpower great content fellas .

@markjlewis 6 ай бұрын

Nice use of a height multiplier by the guy helping to take the engine block out. I was particularly impressed by the efforts to keep the cylinder head and components out of the dust. I'm sure those valves and camshaft will be just fine after a rub down with some coarse grit emery.

@vladislavzhukovskiy3009 6 ай бұрын

100%!!:)))

@hansmeiyer831 6 ай бұрын

I especially like how precision engine parts are first placed onto sand and dirt.

@hiddencow3272 5 ай бұрын

like, they had cleanish areas but just put the cam in a pile of dirt lmao

@Converter1959 7 ай бұрын

“Is the correct torque one outstretched leg and a bit more twist on that bearing cap”?

@vladislavzhukovskiy3009 6 ай бұрын

Cuz it needs a pinch of sand poured into the crankcase for better break-in!

@ih8hertz1 6 ай бұрын

If it does 10 miles it's a bonus

@glovesoffofficial1382 4 ай бұрын

These guys are extreamly clever using basic tools as they don't have many spare parts so they don't complain they just get on with it! Pakistanis are brilliant at this

@oldergeologist 2 ай бұрын

I have been told that when they reach the correct torque their elbow clicks. Bad joke, they are doing the best with what they have got.

@mikewilliams2072 3 ай бұрын

'I like the gentle way they scrape away the gasket material on the block trying not to gouge the machined surface!!!!

@stephengibbs4372 7 ай бұрын

Wow i love your torque wrench😂. Mains are 76 ft lbs and bigends are 29 ft lbs + 90 degrees, not do it up till your elbow clicks. The rod and head bolts are torque to yield so dont be surprised if it blows again. Good luck.

@tuomasjarvinen4239 7 ай бұрын

Naah this man uses sandals, he knows what he's doing

@vintagerecordambassadeur4098 6 ай бұрын

Zero chance

@arjanlangerak3842 5 ай бұрын

Moet je eens proberen om zonder momentsleutel iets op juiste spanning vast te draaien je zit er altijd veel newtonmeters naast

@КарабасБарабасов-и6з 5 ай бұрын

@@arjanlangerak3842 Динамометрические ключи придумали для того, чтобы доверить работу низкоквалифицированным работникам. Грамотный механик затянет любые болты до нужного момента без динамометрического ключа.

@supergub 5 ай бұрын

And reused the bolts

@david929190 7 ай бұрын

Main bearing caps are marked with the order they belong. Same with rods. Toyota did a good job machining that engine when new for the main caps to interchange and still allow the engine to run. Basic shit if you've been taught.

@tbugher62 6 ай бұрын

I just use pliers to tighten the main bearings,never had a problem.

@aarondwyer3746 7 ай бұрын

What a beautiful interlude,the beautiful call of the faithful,whilst he was working on their latest acquisition the police van

@thomasvarner4910 6 ай бұрын

It’s great what these mechanical guys do with hand tools and a dirt floor….American mechanics could learn a lot.

@petermoto409 6 ай бұрын

Yeah, like NOT how to work.

@candylikeno.1867 2 ай бұрын

But exterior, interior and protective equipment are not a topic. Taking care of your own health isn't so important, or? That is probably one of the reasons why the average age among men in Pakistan is only 67.3 years.

@CipherFive 2 ай бұрын

Like how not to use a torque wrench! lol

@A_Stereotypical_Heretic Ай бұрын

Yeah we use these videos to show us what not to do. Ever.

@kennethcolbert2921 3 ай бұрын

They do darn good work for what tools they have.

@A_Stereotypical_Heretic Ай бұрын

They do terrible work with any tool they touch

@emilytorres7009 4 ай бұрын

The dedication and hard work really pay off in these videos.

@stevecann3394 6 ай бұрын

More of an engine resto, I wanted to see a finished truck!

@johnhurley6333 6 ай бұрын

Should be on an NHRA engine squad with skills like this .

@jt8280 Ай бұрын

Scotty Kilmer likes this video.

@ivantaurua6735 7 ай бұрын

These Pakistani mechanics curiosity for restoring anything mechanical is both a strength of knowledge and weakness for the lost cause however unperturbed by the challenging dilemma and is essentially the motivation for this particular project of rebuilding a vehicle way past its initial use by date expiration however these conceptual limitations have no effect whatsoever resulting in team of backyard enthusiasts who are eager to invest their time and resources into whatever is required to complete the rebuild we as viewers can only dream big like them

@CHUCKSNORRIS 6 ай бұрын

Bet you can't hold your breath and say that underwater.

@A_Stereotypical_Heretic Ай бұрын

Did you chatgpt that?

@mikewilliams2072 3 ай бұрын

Love the way they clean the block by filling the water jacket with acid of some sort and t h en washing it out onto the ground, you know that it isn't going to get into the ground water or anything!

@RacerX1971 2 ай бұрын

I'm still driving my 2004 Buick and 2005 Envoy. In my garage is a 1965 mustang and a 71 Datsun

@anthonioscotland1842 6 ай бұрын

Great 👌 job guys 👍👍👍👍

@texasranger7262 Ай бұрын

The guy washing the dissembled truck has the most fun job...

@philmaguire3887 2 ай бұрын

Great People Unbelievable Greeting from Ireland 🇮🇪 Phil Maguire

@jamesgilpin5535 4 ай бұрын

I like his workshop 😂

@LucasAndrade-b9r 6 ай бұрын

Un genio mecánico repara y restaura una furgoneta de policía oxidada de veinte años

@andresramos7277 6 ай бұрын

Chingones my friends… saludos desde mexicali 🇲🇽🤙🏾🤙🏾

@TylerChristoher 5 ай бұрын

Love all of this

@joostderidder 6 ай бұрын

Probably you have enough experience to "feel" the torque using only your "arm-memory". But I would invest in a good torque wrench... really !!! Otherwise ... great job, gentlemen !!!

@VintageTexas59 3 ай бұрын

And some air-tools at least...time is money...not even a ratchet taking stuff apart... back to the 1930...nuff said

@zahkam7322 6 ай бұрын

Here I am thinking about buying a torque wrench that can go down to 2nm cos the BMW manual states that the injector brackets on a B48 need to be torqued at a specific torque and angle and these guys are doing headbolts with what looks like a Tyre spanner! LOL

@lloydchristmas1086 6 ай бұрын

Manufacturing guidlines is all...just covering their asses

@zahkam7322 6 ай бұрын

@@lloydchristmas1086 I don't know about that , Some of those bolts are stretch bolt's , if you over tighten them they snap , and they are the absolute worst to get out if they snap , the metal feels soft. Some bolts because of that are one time use as well , and your tightening them into Aluminum heads or plastic parts so not only can it snap but also damage the part itself. And for some reason if not torqued to the correct spec or close , they start to leak .

@markdicker686 4 ай бұрын

Good job. I've been a mechanic since 1973 in uk. Nice to see real mechanics working. I do think he should have used a metric hammer to remove the pistons and con rods though.

@A_Stereotypical_Heretic Ай бұрын

Get a torque wrench

@A_Stereotypical_Heretic Ай бұрын

@lloydchristmas1086 yeah come back and talk to us after you encounter a TTY bolt and try to do it by feel.

@Wowmechanics1 4 ай бұрын

MashAllah Good Hard Work ....Geo

@Tuberesu 7 ай бұрын

If he was a "mechanical guy" he would be either an android or a robot; looking at the screen, he appears to be quite human and therefore a MECHANIC or an operative.

@anthonykinrade8642 7 ай бұрын

If it exudes shite it must be an asshole.

@M21-w1y 6 ай бұрын

Robot chicken😂😂😂😂😂

@Iamallstuff 4 ай бұрын

Well, you're quite the idiot eh?

@ralfkaiser4027 6 ай бұрын

Ölabscheider ist Luxus......!!!!!!

@gbrown4796 6 ай бұрын

Great imagination in clothing design…and safety shoe.

@davidsanders6957 6 ай бұрын

Amazing what you can do when you have no money

@leberhueriba1230 6 ай бұрын

They are real mechanics not like those of today who only know how to change parts and charge very expensive !

@RobertFord-z7n 5 ай бұрын

Then have them work on your vehicle and see how long it lasts

@VintageTexas59 3 ай бұрын

Really ? Not one thing I watched was anything quality...not even a scraper for cleaning the old gasket off..worst backyard mechanics I ever seen...putting lipstick on a dead pig... The engine will not last long or even run right.. no torque wrench on the mains.. Maybe 100 miles before it goes dead..

@burden88 2 ай бұрын

You know nothing about engines and cars huh?

@marcomalo02 5 ай бұрын

Somebody ought to buy this outfit a torque wrench.

@nmb46 6 ай бұрын

Well that ended abruptly!

@speedybuggy1677 6 ай бұрын

Very cool 😎 truck I love to see the truck run again it can be a very nice truck very great work you guys are doing to the truck I give you five stars ⭐⭐⭐⭐⭐ I love to on a truck like that truck

@markdicker686 4 ай бұрын

Strange how 20 years has become old. My youngest vehicle is 2001

@caseknives-3643 2 ай бұрын

Time flies boy

@Richard-pe4cx 6 ай бұрын

gotta hand to these guys with minimal tools and equipment they get the job done part 2 on the body resto ?

@anonemous1046 6 ай бұрын

I am actually surprised. I thought they would be lifting the van onto a motorcycle or a donkey cart! Instead it's a real life tow truck, albeit smaller!

@biltongenkaas 6 ай бұрын

Chip and Dale narrating again

@Hurerakhawaja 7 ай бұрын

Excellent work

@PryaWattana 6 ай бұрын

Thank you for the video. Great work guys 💯💯

@Jim-ie6uf 6 ай бұрын

Years ago, while working in the yard, I took a drink out of the hose. All was fine till a swollen up dead lizard came down the pipe into my mouth. That was about 30 years ago, never drank out of the hose again 😂

@roberta4989 6 ай бұрын

No wonder they call saying they are Microsoft Technical Support ripping off people, they are saving up to buy an engine stand.

@M21-w1y 6 ай бұрын

To the guy with the grinder, safety glasses are way overrated 🙄

@arshadlaalwani 5 ай бұрын

I realy Appreciate You Bro Zabardast

@LanDaiLyLife 2 ай бұрын

Hello dear friend ❤❤❤

@PaulHayman-tq5kb 6 ай бұрын

If and when it blows up again All they're going to is mix old parts with more Old parts

@tlgaoun533 7 ай бұрын

Part 2 ???

@vladislavzhukovskiy3009 6 ай бұрын

Few days later;))

@AlecGAAA 5 ай бұрын

A man came to restaurant and sat at the table. Waiter gave him a menu. Man decided on duck soup. Waiter took order and left. Few minutes later soup were served. Short time after man asked waiter to try soup. Waiter asked man: - Is there any problem? Man said: - Please try my soup... Waiter ask again: - Is it too salty? Too hot? Something wrong with it? Man firmly said: - Please try my soup... After sometime arguing , waiter finally said: - Ok! I'll try it! Where is the spoon? - A ha, A ha, A ha... - said man...

@supergub 5 ай бұрын

This is fine.

@deancwhmackinnon6547 4 ай бұрын

The safety sandals and skin colored gloves

@ИгорьЩеголев-и5ш 2 ай бұрын

Очень понравился местный детейлинг. А динамометрические ключи - просто класс! Правда, я так и не понял: мотор зачем разбирали?

@alan-rc2tv 4 ай бұрын

Torque wrench, "what's that?"

@ameliaroberts3945 6 ай бұрын

Excellent job on the rusty van, I loved that torque wrench, is it a self adjustable one?

@arjanlangerak3842 5 ай бұрын

Ook lekker milieu vriendelijk denk dat de milieuschade grotere is dan kosten schoonpoets revisie

@hothmobile100 Ай бұрын

It's a Toyota but unfortunately the engine depends on a rubber timing belt. Glad they got rid of that.

@ricksfixit8577 6 ай бұрын

Looks like an old Toyota SR5 truck. That is definitely a Toyota 2L diesel engine which is similar to a 20R gas engine and the forerunner to the legendary 22RE. That being the case it should be alright as many a shade tree DIYer can attest!

@Offroader451-rm5jz 6 ай бұрын

Good job

@hassanodeh6810 6 ай бұрын

Very nice work I wished to see the rest of the work and the moment the car started and painted

@tumbleweed996 6 ай бұрын

how undeveloped that country is not even a bench to work from,or a power tool ,but they still manage to get things fixed

@garrypritchard1658 5 ай бұрын

A fuel tank had a bench

@mikewilliams2072 3 ай бұрын

It's cleaner than it was when we took it apart, what do you mean keep th parts off the ground!

@СтепелтонДжонс Ай бұрын

Пакистанские перекупы знают толк.

@elguapo3527 22 күн бұрын

I knew that air filter was going to be bad even before he took it out.

@sultanalharthi1 9 күн бұрын

ماشاء الله

@YoureNowOnTV 4 ай бұрын

Incomplete video. 😠 I really need to go to the end of these videos before watching over 25 minutes just to be scammed out of the ending. Shameful!

@donnienicholson6062 14 күн бұрын

Go for the gusto!! Acid is smoking in the engine block, bare toes everywhere......what could go wrong??

@paintanddent 6 ай бұрын

All the money I've spent on for work-benches, vises, engine lifts, torque-wrenches and the host of other "necessary" equipment---- I don't think anybody would have worked for me if they were expected to scrabble in the dirt--- I know this goes on and I did it in the early days fixing my own cars but I don't think I would have published it

@caseyhelders8421 6 ай бұрын

What's a torque wrench?

@ma77rko7 2 ай бұрын

Where is the genius here, normal work like 30 years ago.

@anonemous1046 6 ай бұрын

I am sure they know that the engine will not last with metal tubes scraping the inside of the piston walls, dragging the machined surface across dirt and sand and a torque wrench is nowhere in sight!

@XusenTurdaliev-u2o 2 ай бұрын

👍

@AlecGAAA 5 ай бұрын

Where can I get that torque wrench? Never seen that model before

@VincentWhite-b3v 5 ай бұрын

I haven't seen any gaskets or seals

@alfonsomontes8829 6 ай бұрын

Part # 2

@ilikequiet6474 5 ай бұрын

Why didn't they remove the hood FIRST

@juliosantos9289 4 ай бұрын

that cage in the back was for the drunks that partied too much on Saturday night.😂

@ironnerd2511 4 ай бұрын

I'm disappointed because the job was incomplete.

@tbugher62 6 ай бұрын

Is that super glue they are using to mount the head ?

@A_Stereotypical_Heretic Ай бұрын

Theyre just repairing the very same vehicle that will haul them away when they forget to say their fifth daily prayer.

@scholarlyreader383 3 ай бұрын

I bought a Sr of seven large tailor scissor made in pakistan..after three months of usage the all shaddeted like glass.. Fake metal or some

@fitzyholden1036 Ай бұрын

Dodgy would be a more accurate description.

@casprg 6 ай бұрын

Se si accende e un miracolo...

@dusterowner9978 6 ай бұрын

going to Mohammed Shieb paint shop dirt free

@michaelstevens3479 5 ай бұрын

Under pressure to get his wife to the shops before closing time.

@Dave-Huston-Dublin 6 ай бұрын

@21:30 Nokia 6310 still going.

@rickey5353 6 ай бұрын

How much torque are you applying to those con-rod caps? "All of it! " 😆 /

@Gans_Deutsch 5 ай бұрын

Hoffentlich haben die nicht Vergessen den Ölabscheider einzuschalten!

@the.h.7987 Ай бұрын

How to contact you?

@pakmechanicalskill Ай бұрын

@@the.h.7987 talagang city

@tvp79 4 ай бұрын

переборка двигателя в песке... пфф... не вопрос, главный дед двигателист весь в белом, первый раз чистая одежда в таких роликах

@vladislavzhukovskiy3009 6 ай бұрын

Damn, yeah!! Who needs those stupid torque wrench, measuring tools, new cylinder head bolts and other nonsense?? I think they put new pistons and bearings same way: if it moves it's ok!! Welcome to paquistancraty!

@РоманБумер 5 ай бұрын

Интересно,на сколько Ньютонометров у мужчины в белом халате выставлено колено?😂😂😂

@thomasburney4551 2 ай бұрын

I wonder how many Taliban the truck carryed

@MTBer-z5l 2 ай бұрын

Da ging es doch fast nur um den Motor, aber wann wird die rostige Karosserie bearbeitet?

@juliosantos9289 4 ай бұрын

The correct torque is tight and then some. If that don't work try ten ugga duggas.

@joemoore4027 5 ай бұрын

So which one is the " Genius " mechanical guy ? Love the torque , crank down till it smokes and back off a half turn. This is NOT a repair or a restore.