Genmitsu L8 all in one 20w Diode Laser. Works right out of the box.

Рет қаралды 2,902

Күн бұрын

The Genmitsu L8 Laser Engraver machine is pre-built and ready to use right out of the box. You only have to connect the two USB and air assist with power cord and the laser is ready to get to work. The cutting base has a tight fit in the bottom of the housing that keeps it in place. The cord management is well placed to prevent bunching or pinching of the cables. With a 20w laser you can cut 1/4" plywood in a single pass.
Learn more about this laser here:
www.sainsmart....
SethCraft is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

Пікірлер: 23

@BrittCHelmsSr 6 ай бұрын

I have had a CO2 K40 laser with an upgraded 60watt tube for several years now, and with a few minor upgrades, it has served me well. I cover my material with a layer of vinyl decal transfer tape to prevent that soot from getting on finished product. I'd be interested in seeing how the rotary tool works with this unit. I'd also love to see how accurate the camera is in getting a design within a specific area (like a pre-cut metal blank). Keep up the good work.

@SwapPartLLC 6 ай бұрын

I got the 40 watt. The biggest surprise was how big it is. I have an idea to make a cutout on my workbench and make a system to raise and lower the work surface. Then, I could fit bigger items in it without needing to mess with the legs, and it could still be entirely enclosed.

@Sylvan_dB 6 ай бұрын

Seems like some nice equipment. Sure was glad at 6:02 to see you had removed the protective film from the front lower acrylic. 😁

@johnisley4578 6 ай бұрын

Seems to work great, it's a learning curve.

@sethcraftworkshop 6 ай бұрын

This laser was great right out of the box.

@nic6754 6 ай бұрын

First vid in the new shop? Very cool bro. Kudos to you

@sethcraftworkshop 6 ай бұрын

Thanks! I still have a long way to go before the laser room is setup.

@newt2010 4 ай бұрын

During your cut test, the air assist indicator was red. Might be why you are getting some blackened edge shadow look. Not sure. Don't have one. YET. Thanks for the video

@Hat_Uncle 4 ай бұрын

The only issue I had with mine was the airflow light stayed red, doesn't detect pressure like it should, but there IS airflow, so I'm not too worried about it.

@sethcraftworkshop 4 ай бұрын

Mine did that a few times at first. But it has been good for the past 2 to 3 hours of use.

@JamieEichelbergerForest-xl1nm 22 күн бұрын

Great video. What if the laser engraver did not come with a camera, do you think i will still be able to use it?

@AshleySinyard 12 сағат бұрын

What exhaust system will you be installing?

@raedavis4662 Ай бұрын

Where is the adapter for the tif card?

@buzzie8 3 ай бұрын

Will your L8 power up without being connected to the computer? I am having trouble getting anything but a power on light. But I am also having trouble getting any connection to my Apple Macbook Pro. My assumption is that the air assist and the laser should work even though my computer is not connected, correct?

@yancyjarquin4683 3 ай бұрын

Can I put gun parts in it ?

@sethcraftworkshop 3 ай бұрын

Diode lasers can remove the coating from aluminum. If you want to engrave on other metals you will need to get the IR laser head.

@yancyjarquin4683 3 ай бұрын

@@sethcraftworkshop ohh ok I just bought a new one on a local bidding site , so all I have to do is change the laser head?

@yancyjarquin4683 3 ай бұрын

@@sethcraftworkshop also I’m just trying to do nice designs on the guns , not cut holes or anything

@xsiner 6 ай бұрын

Sucks that it does not come with the software to use.

@joea361 6 ай бұрын

There is free software out there, but most people use Lightburn.

@Warped1369 5 ай бұрын

LightBurn is only $60, free upgrades for 1 year. It's not a subscription program, works forever as long as you keep your keys. You can, however, renew your license key for $30/year to keep up with current updates. It includes "seats" for up to 3 computers, and you can move seats to different computers if you need to, like when you get a new computer. It is a true bargain in terms of useful and powerful software.