Purchased these because I thought they might be useful. They have become my go to magnets.
Пікірлер: 107
@anastasiakutakokov1772Ай бұрын
I've always been a fan of the magnets, the neodymium ones, but you've sold me on the on off magnet now, thank you so much!
@EggzMC7 жыл бұрын
White Morgan Freeman
@CzKaa4 жыл бұрын
Racism! :p Just kidding. Who cares about color? Ale good people are awesome. :)
@Richard-Freeman4 жыл бұрын
Vitiligo?
@Benjiblue5593 жыл бұрын
Hi George, thank you very much for your perspective and use of these magnets!
@8974733 жыл бұрын
Thanks for commenting. I keep finding more and more uses for these magnets. Turns out, one of my best purchases.
@brictophussein2167 Жыл бұрын
@@897473 Great video, one question sir, does the magnet switch attracts another magnet when its off?
@azzabouy82438 күн бұрын
This is the best video ive seem on these, thankyou
@Everett-xe3eg5 жыл бұрын
this is fantastic video thank you for posting it!
@8974735 жыл бұрын
Thanks, I've keep finding more and more uses for them.
@jimsimpson8663 Жыл бұрын
Thanks George a great tool . . . but tooo expensive ! There must be a way to make my own ! 😮 Jim
@belgrademachine8 жыл бұрын
I too use magnet blocks on my shear and other times. very useful!
@8974738 жыл бұрын
+belgrademachine You may be the person who first mentioned these. If so, thanks.
@p4our5872 жыл бұрын
Very useful & relevant information. Thank you, for sharing!
@Buddy-po4hv4 жыл бұрын
Did you see how he runs his finer against the metal shavings on that magnet? This dude can file steel with his finger!
@leehaelters61823 жыл бұрын
When you try your best to get a popular comment
@felenov2 жыл бұрын
When used with a dial indicator a switchable magnet is a great thing to have
@Invictuss3 жыл бұрын
The thing with copper is not that it is too thick, it's that the copper specifically stops the magnet field, which turns into current induced in the copper material.
@8974733 жыл бұрын
Interesting! Thanks
@Invictuss3 жыл бұрын
@@897473 How magnets work is somewhat of an enigma. I would be curious if you could put my statement to test by comparing the results with a sheet of steel of the same size. I would expect the magnet to have no issue in holding the steel in place.
@8974733 жыл бұрын
@@Invictuss Not exactly sure what you are asking. For best specifications and information go to magswitch.com/.
@rogeronslow14982 жыл бұрын
Only if the magnetic field is changing. A static field produces no eddy currents.
@hyperhektor77335 жыл бұрын
3:12 you coul fill the gap (flush to the edges) with resin so no stuff sticks between the plates, but instead only on the corner. It makes it easier to clean
@8974735 жыл бұрын
Thanks, interesting idea!
@CharlesStruble8 жыл бұрын
I have a couple (different brand) and find them very useful. O.K. fun too... Thanks George!
@8974738 жыл бұрын
+Charles Struble Charles, where did you get yours?
@CharlesStruble8 жыл бұрын
+George Goehl Gosh, it was years ago, Probably a woodworking catalog. Mighta been Rockler. I used to buy from them pretty regularly.
@8974738 жыл бұрын
+Charles Struble Thanks, I'll check that out.
@PodeCoet8 жыл бұрын
Never heard of these, brilliant!
@8974738 жыл бұрын
+PodeCoet Yes, they're pretty neat.
@jafinch783 жыл бұрын
Thanks for sharing the details. I was wondering about using as a ground clamp for welding and no way want to use those smaller point designs. Seems more surface area in contact to provide less resistance.
@8974733 жыл бұрын
Not sure how you intend to set it up as a ground. Have been taking photos of all the ways that I use the magnets, hope to have that video up soon.
@jafinch783 жыл бұрын
@@897473 I have a feeling I'm going to try to custom make one with parts around the shops since I have a few hard drive and other magnets. Still not sure about the design. Thought magnets in the center of a short block or thick wall tube, with a stud to bolt on the ground lead, attached at the end of a threaded rod on a fixed nut on the top of the tube with a handle. Not certain what I'd have that will be a thread with very few TPI to make a larger range of motion in a fraction of a turn however. Looking forward to you uses for inspiration in for other utility.
@egreenie38195 жыл бұрын
Working man's hands!
@mrkps19863 жыл бұрын
it works really well in EOTs
@8974733 жыл бұрын
Thanks for viewing. What is "EOT's"?
@mrkps19863 жыл бұрын
@@897473 Electric overhead traveling crane, can you make one animated video on how on off magnets actually work
@8974733 жыл бұрын
@@mrkps1986 Actually I don't know how they work. Put them on a piece of steel and turn the handle. I'd suggest you take a look at the Mag Switch web site. They have numerous videos. magswitch.com/ An example: kzbin.info/www/bejne/pZOYiqGFjq58nKs Their videos can give you thetechnical answer to your question. George
@JeungFats3 жыл бұрын
Lol you just justified buying this for a welder, cool stuff
@bitsob38205 жыл бұрын
Wow! That’s really cool!
@8974735 жыл бұрын
Good comment! Yes, they are really cool!
@istvanfrank92013 жыл бұрын
Pleasant voice , cool
@8974733 жыл бұрын
Thanks!
@not2fast4u2c8 жыл бұрын
Those are nice magnets
@8974738 жыл бұрын
+not2fast4u2c Yes, they are nice. Trying to justify to myself that I need the next step up for heavier work.
@brictophussein2167 Жыл бұрын
Cool video, one question sir, does the magnet switch attracts another magnet when its off?
@joshuanorris97855 жыл бұрын
Great video! Is it possible to pick up & drop a magnet of similar strength instead of metal? Also, can this switch mechanism be reversed to repel another magnet instead of attract? Thanks!
@8974735 жыл бұрын
Thanks for viewing. One magnet will pick up a same size magnet. Reversed? I don't think so. For more tech info I'd suggest mag-tools.com.au/
@vidbot8 жыл бұрын
Any link to where you bought them? Company name at least?
@8974738 жыл бұрын
+vidbot Sorry, should have mentioned that. store.cyberweld.com/maswmasq.html
@vidbot8 жыл бұрын
+George Goehl Thanks!
@ESCAGEDOWOODWORKING8 жыл бұрын
very nice! I want to buy a welder. What type would you recommend for a home shop? A choice one for someone new to it?
@8974738 жыл бұрын
+ESCAGEDO WOODWORKING That's a broad question. Depends on what you want to do. Also, how much money you want to spend. If you are primarily welding steel to steel, then a Mig welder. If money is an issue, then you might consider a flux cored Mig welder. Some people really like these. Going up in price, you may want a Mig welder that uses shielding gas. I use argon 75. Another choice is Oxy/Ace: With OXy/Ace you can weld, braze, heat, bend and anneal copper. As you can see, there are several choices. Let me know what you want to do with welding and maybe we can narrow it down.
@ESCAGEDOWOODWORKING8 жыл бұрын
Thank you!! I want to add metal work to my furniture builds. I need to start off easy on the wallet though. Thank you in advance!
@8974738 жыл бұрын
+ESCAGEDO WOODWORKING For the type of work that i do, if I only had one welding type in my shop, it would be oxygen acetylene. Final suggestion, watch a lot of videos and figure out what is going to work best for you.
@ESCAGEDOWOODWORKING8 жыл бұрын
Thank you Goehl!!
@lorenavalenzuela35726 жыл бұрын
ROCK N WOODWORKS I have a Chinese brand HYL and work just great and for the money is perfect.
@gurudingore79942 жыл бұрын
If one parmanent magnet is kept near magswitch and magswitch is turned off, while doing so, will the parmanent magnet oppose the turning off of magswitch as direction of rays change
@jamesmatheson58132 жыл бұрын
Ok Heres what I see wrong You mention how much weight it picks up But not how much it takes to make the handle turn How much weight does it take to make the handle turn Thanks for letting me ask
@nenadmarkovic21293 жыл бұрын
max tickness of wood?
@8974733 жыл бұрын
For technical questions about these magnets, go to: magswitch.com/
@niklar555 жыл бұрын
Looks very useful. I wish you would dismantle one so I could see how they are constructed.
@8974735 жыл бұрын
Yes, very useful. I'm surprised how often I use them.
@niklar555 жыл бұрын
@@897473 I found the parent site, and, from them, a supplier in the UK, and have asked for a price from them. I'm in France, but the French often charge 2-3 times the price from the UK, and they are usually double the USA price, plus shipping! They will be good to hold things to my wood turning lathe bed, like spindle steady, etc. I've scanned your site and all the videos, and will look at them in more detail later. I made copper jewellery when I was 12-13, 'for me mum' which was over 60 years ago. So it might be amusing to try again.
@8974735 жыл бұрын
@@niklar55 Here is a good photo of these magnets from a woodworking site. woodworker.com/magjig-60-mssu-148-653.asp?GF=1&gclid=Cj0KCQjw19DlBRCSARIsAOnfRegLtCk0FiEnHQyVVxPnm3JkhBFDa6IWa1tt1RuRJq0zC2aYNKqq6XEaAndTEALw_wcB
@murali48875 жыл бұрын
Where to buy these? and can you please share the technical data . we want hold the cutout fixtures like a jigs and fixtures
@8974735 жыл бұрын
Check out this link: magswitch.com/welding-fabrication-magnets/
@Bayazid.Bulbul2 жыл бұрын
I realy like it. how to order this one?
@deodelossantos18915 ай бұрын
How to buy this product
@lucasfisher96538 жыл бұрын
hey where can I get one of them, also how much do they cost. thanks
@8974738 жыл бұрын
This is where I bought the magnets: store.cyberweld.com/maswmasq.html
@TravisJBair6 жыл бұрын
Where to buy these? Also what does the switch do to remove the field?
@8974736 жыл бұрын
I bought a couple from Amazon. Two small ones I bought from cyberweld.com, . Do a search for Magswitch. The handle is for off/on. When the handle is turned to off, the magnet disengages. For more information check with: magswitch.com.au/
@sadiq1810 Жыл бұрын
Whr I can get this
@slimpick77734 жыл бұрын
how should these be stored? stuck to a piece of steel or simply turned off?
@8974734 жыл бұрын
Good question. I have them turned off and placed on a shelf.
@SANJAYSHARMA-bk5jk4 жыл бұрын
I want to hole my polyeurethene part of 3mm thick ..which is sancwithch beween 1mm thik aluminum and steel plate .. can it held that
@8974734 жыл бұрын
I'd suggest contacting Magswich: magswitch.com/
@amaremahtsentu84676 жыл бұрын
thank you .... but you better tell us the internals....
@8974736 жыл бұрын
look on the right side panel: gsegmedia.com/
@richardharris53367 жыл бұрын
Do you think these would be able to hold flat bar stock whilst on an industrial belt grinder? (say something around 300 x 40 x 5mm)
@8974737 жыл бұрын
I really don't know. I will say this, that the #400 magnet has a tremendous holding power over the #165. If cost isn't an issue I'd get the #600. Sorry I can't be more help. You might check with the company.
@richardharris53367 жыл бұрын
George Goehl thanks George! I was eyeing the 400 version. Might give them a go, see how their fair, I'm sure I'll find a use for one.
@8974737 жыл бұрын
When I bought mine I had a specific use for it. Since then I have found multiple uses.
@thademashok02023 жыл бұрын
How much cost
@jeemonjeemon7272 жыл бұрын
India kerala സ്റ്റേറ്റ് ഒരണ്ണം വേണം
@delatorrecaleb4 жыл бұрын
Since magnets hold a charge are they like batteries? 🔋 and magnetic fields or electrified air with an inlet and outlet?
@8974734 жыл бұрын
Better than me trying to answer your question, go to the source. magswitch.com/
@firstnamelastname73746 жыл бұрын
You could effectively Make a cheap railgun out of that with a bit of work it could be lethal
@deodelossantos18915 ай бұрын
Hello sir
@ZeroTea6096 жыл бұрын
Will this product work underwater?
@8974736 жыл бұрын
I don't know. Here is the companies,web address. You can ask them I'm sure they have been asked that question before. magswitch.com.au/product/magswitch-magsquare-400/.
@8974736 жыл бұрын
I don't know. Here is the companies,web address. You can ask them I'm sure they have been asked that question before. magswitch.com.au/product/magswitch-magsquare-400/.
@hockeytime66335 жыл бұрын
Yes there no electricity involve. Only two polarity magnet combine or oppose inside.
@azharhussain7665 жыл бұрын
Nice bat costly
@8974735 жыл бұрын
Like anything else cost must be justified. I've done without them for forty years. However I do find that they increase my productivity.
@Dianeee1117 жыл бұрын
Hello! What about the situation when you turn the switch but then don't let the switch to come up? Like keep holding the switch down. Does it still works as magnet then?
@8974737 жыл бұрын
I don't know. I've never tried that. I am out of town so no way to check.
@mattikaki6 жыл бұрын
Could you please speak a bit louder , thanks.
@8974736 жыл бұрын
try turning up your volume. I test each video for a default volume.
@mattikaki6 жыл бұрын
George Goehl I have my iPad volume in its max and other videos are usually loud enough. Well the music usually too loud. The ad coming before your video is very loud compared to your voice. You could perhaps use compressor to equalize the voice as it fluctuates much. Your voice is much softer than todays speakers usually and it is nice to listen but sometimes hard to follow.
@8974736 жыл бұрын
Sorry that's not working for you.
@mattikaki6 жыл бұрын
George Goehl My hearing is also getting worse due to menier’s. I think I should start using headphones. Anyway it is a pleasure to listen you because great deal of the youtubevideos are really noisy and having terrible ”music”.
@8974736 жыл бұрын
Did you try adjusting the slider on the KZbin player?