Gep RC Smart 35 AIO Stack Build

  Рет қаралды 256

Cube FPV

Cube FPV

Күн бұрын

Building the Gep RC Smart 35 airframe with an AIO board, using a non standard technique of combining the central and rear stack positions. More details on this build are available on my website here - cubefpv.com/co...

Пікірлер: 6
@jayzzz1234
@jayzzz1234 2 жыл бұрын
Great video speeding it up made it much more simpler to keep track, any chance you can explain the difference between xt30 and xt60 also xt90?
@cubefpv
@cubefpv 2 жыл бұрын
XT30 / 60 / 90 are just different size connectors. These days most quads up to 4 inch use XT30 and 5 inch which use 6S batteries with higher voltage use XT60.
@mikedoesstuff3641
@mikedoesstuff3641 2 жыл бұрын
What was the final weight of this build? if you are after a super light 35 build try the GNB 660mah 4s batteries, looks like you are using the tattu 850s there? also i may be wrong but i think the better way to put the spike absorber on is to run the cap legs through it and solder to the esc that way so there is no legnth of wire to it. Pretty sure having it on a wire limits its effectiveness.
@cubefpv
@cubefpv 2 жыл бұрын
Airframe is 145grams and with a 750 mah 4S it comes to 229 grams. 650mah 4S also gives good results but I just find thke 705mah limits battery sag a bit. The method you suggest here for the Fettec spike absorber is what I usually use, but on this build the AIO board is too long and the spike absorber won't fit behind it because it ti too wide to protrude through the rear frame standoffs.
@mikedoesstuff3641
@mikedoesstuff3641 2 жыл бұрын
@@cubefpv ah fair enough, mine is at 150g but not a naked vista, we had been using the GNB 660 batteries, but they have very thin cables, which we figured were causing part of the sagging, the hope is the GNB 650s (which is what i meant to type above) have a much higher C rating and thicker cable so should perform better. The lighter batteries fly completely differently, but i do agree the 850 is a good fit for this sort of quad, i can get 8 or 9 minutes out of mine if its flying level.
@cubefpv
@cubefpv 2 жыл бұрын
@@mikedoesstuff3641 Yes 650 to 850 is good. But must have a high C rating. Mine are 90C I think.
3 5 Inch FPV Drone Motor Testing
20:53
Cube FPV
Рет қаралды 486
Coaxial Levitator 1 Assembly and first ground test.
22:43
amazingdiyprojects
Рет қаралды 53 М.
Spongebob ate Patrick 😱 #meme #spongebob #gmod
00:15
Mr. LoLo
Рет қаралды 22 МЛН
Synyptas 4 | Жігіттер сынып қалды| 3 Bolim
19:27
Officer Rabbit is so bad. He made Luffy deaf. #funny #supersiblings #comedy
00:18
Funny superhero siblings
Рет қаралды 17 МЛН
Magnetic Switches - for $20 each!
20:42
The Warthog Project
Рет қаралды 417 М.
Why Are Guillotine Blades Angled? (tested)
18:40
Know Art
Рет қаралды 608 М.
Make a TINY Arduino Drone with FPV Camera - Will It Fly?
20:26
Max Imagination
Рет қаралды 1,1 МЛН
Levitator 3 Further Testing. DIY aircraft.
18:15
amazingdiyprojects
Рет қаралды 748 М.
1% Flying 99% Crying
4:09
lolthekidison
Рет қаралды 4,1 М.
Lithium Ion Cells Copper Braid or Welding
16:14
Cube FPV
Рет қаралды 1,7 М.
DJI Mini 4 Pro GOES MAD in 40° Ski Slope Active Track Challenge!
12:52
HD Zero AIO in an Air65- Digital FPV tinywhoops just got amazing
11:58