Get Rid Of THIS Garbage in Your Foxbody Mustang 5.0

[@foxfordcatguy2283]

Removing the intake silencer is a proven 4 HP gain. MM&FF magazine tested all on these cheap/free easy mods "back in the day". When these cars first came out, we were doing everything we could find to eek out every bit of extra power out of them. Removing the silencer was part of the famous/proven "10 Minute Tune-up". Every little gain adds up.

[@mccoyji]

The better sound you get is worth 10 hp

[@madpatton524]

Don't need to bother with the extra idler pulley. For future belt purchases just remember to ask for the stock belt for a non-A/C 5.0. Its the correct length.

[@livelife6214]

Not if I don’t have AC as well or does that still work

[@madpatton524]

@livelife6214 if you don't have A/C that will be a different belt. LMR has a chart that covers the lengths for different combinations

[@89gt5.0]

How about a video on removing the tab and tad solenoids and plugging the vacuum feed line to it.

[@Allmotorzl1]

And what about removing egr cooler?

[@coreymcdonald1520]

Sole reason I clicked it

[@TheRoadhammer379]

There's several vids on YT on removing ALL smog, doing the resistors etc, just search Ford 460 full smog delete

[@clintd1]

If you disable the Smog pump in the ECM with a chip or a Qurterhorse it will eliminate the 1200-1500RPM start up. It's nice starting it up and it going right to a calm idle.

[@NOrs3GOd]

How would you go about that? Id like to try to do that

[@clintd1]

@ you would need a programmable chip the connects to the back of the ECM “that little door that says (do not remove)” and you’ll need software like Binaryeditor.

[@eric5.080]

if you live in Cali i highly recommend leaving the smog pump on and at least try to get parts that are going to be smog legal in CALI ! i was just in the process of building my foxbody until i got a fu***** state ref

[@KASLCustoms]

I’m in British Columbia Canada 😉👍

[@eric5.080]

@@KASLCustoms damn you guys lucky out there man

[@KASLCustoms]

Lol - it depends on the topic of discussion 😉

[@patsfan8057]

Wow. I'm super lucky New Hampshire doesn't have ANY testing for emissions

[@1tokeover]

Why did you get sent to the state ref?

[@jasonchambers8698]

We definitely need a more in depth look at what needs to be done with the vaccum line's! As I've most definitely been struggling with this part.

[@KASLCustoms]

All you need to do is plug them - that’s it! 👍

[@andrewkupper9519]

Plug all them?

[@KASLCustoms]

There are just 2

[@jasonchambers8698]

Thanks guys!

[@KASLCustoms]

Anytime bud!

[@bowtyklr]

On a budget build instead of getting block off plates you can just cut the plumbing off the pipe coming off the back of the head take the original pieces, flip them over to the flat side not the “hole” side and with a little high temp silicone re attach to the head and you are blocked. Great Video 👍

[@KASLCustoms]

Very good work around 👍. Thx for sharing 👍

[@keehnslaw24]

Exactly what I've done for every 5.0 I've owned over the years. As soon as I seen the block off plates here, I was thinking, "There's a trick for that". And then seen your comment. Good to know other people use their 🧠.

[@caseygtr]

If you remove the smog pump but keep the a/c and power steering with alternator, you can go use an 84.5" belt.

[@levikroeker560]

i did my smog pump delete on my 84 gt, i just keep 2 spare belts with spare tire👍🏻 love the detail with your how to vids. keep up the great work.

[@KASLCustoms]

Awesome - thanks buddy!

[@dBOfox-fy2dj]

Deleted mine with pulley from lmr ...plugs as well ....runs so much better !!!! Highly recommend 👌

[@KASLCustoms]

Right on! Thanks for reaching out!

[@jdub8950]

ive owned my foxbody for 17 years, and i never knew about the smog pump removal. I knew about the pulley delete but wow. Great video. I regret getting rid of my old parts as well. Definitely keep them.

[@KASLCustoms]

👊👊👊

[@ogsuperflygarage]

Hey Brother! I took the smog pump off of my 89 GT... It was truly a piece of garbage... I used an idler pulley from LMR... Works great!! I also got new heads and used LMR's threaded smog plugs to insert into the holes that was once used for the smog tube...

[@KASLCustoms]

Very cool! Yes, I think getting rid of it is the way to go for sure!

[@robertberube2551]

My air pump is starting to tick quit a bit. Was stressed, but this video helps a ton. Much appreciated, thanks man!

[@KASLCustoms]

Right on. You’re very welcome

[@David-nh2ho]

On my 95 sn95 I did a Ac delete pulley smog delete pulley with a bbk pulley kit all at once. Didn't think I'd get a noticeable difference but you could definitely tell!

[@troesplain]

Do you have a video for 4 cylinder smog system removal? Also what about the TAD and TAB plugs?

[@hotrodray6802]

Early 90s Ford Motorsports toured the NSRA shows with an HO powered roller deuce chassis and told how to eliminate smog stuff without freaking the computer. Simple, works. 😁😎

[@miker351w]

I noticed in the video your clutch fan has a large split! If you haven’t replaced it, get a new one asap. They can literally fail and thrown huge chunks off at high RPM! Excellent video too!

[@KASLCustoms]

Thank you. It was the next video that I did 👍 kzbin.info/www/bejne/h6TFl6aXZsaZhMU

[@crabbypapa3862]

Once you determine the correct length, record the belt length. I personally have a notebook with my mods, and, if I've used parts from other cars ( Turbo coupe, continental hydro boost, etc). With my under drive pulley/alternator upgrades smaller pulley, it is definitely a different belt.

[@mikeprimo389]

That works. I also.keep the sleeve the belt comes in and put in glove box. Perfect reference

[@alldabeanzracing9650]

In cases such as this, I just keep a record of the part number and dimensions of the belt that works in the glove box the car so if I need to get another one, it's easy to find... all that pulley does is create another failure point and adds more clutter. Also, there are belt diagrams and belt lengths for every conceivable combination on LMR and several other sights that take out the guess work on belt sizes... Great videos btw!

[@klupeeteable]

Thanks man.. good info.. we got a 67 with those ugly pipes over the blok .. car doen not have inspection anymore 55 years old. So gone remove them.. now i know what all the stuf is .. !!! Thank you sir.. GReetings from Holland europe

[@KASLCustoms]

You're welcome! Thanks for reaching out!

[@OnyxFLTRX]

7:04....might want to consider tossing a new fan on there. Looks like a pretty significant crack in it. I'm told it isn't pretty if they come apart in operation!

[@KASLCustoms]

I have a new one in the box that is part of an upcoming series 👍

[@ranzablevins7593]

If you want cheep power for your dirt bike or go cart mount the pump on eather one . It can be a super charger.

[@MichaelWSmith-wp3eq]

The first time I saw this video was a year or two ago. I have been wanting to do it ever since but was a little nervous. I finally bit the bullet and did it and it was a lot easier than I anticipated. I used your video as a guideline thanks.

[@KASLCustoms]

Right on! Glad it helped

[@AmatuerOasis]

I have an 84 LX with the same thermactor set as yours. The original smog pump lasted 35 years. the Dorman replacements were built like crap and the bearings fail within 2 years. Getting hard to find the correct smog pump anymore. I notice with my 84 that when I have a code 44, thermactor not function, the car runs like shit. When I replaced the TAB valve it went back to a smooth idle. So I've preferred to keep my secondary air system functioning. But like I said the parts are getting harder to find. My car has been idling rough the past few weeks, ran a scan and got code 44. The closest thing to mine I could find on eBay was a TAB for an 87 which is identical to the TAB for an 84 apart from the part number. I'm sure it will work fine. All it does is open or close depending on vacuum. Just curious, the ECM on OBD1 cars aren't really programable. Did you have to install a diode or something to fool the ECM? When that smog pump system is removed the ECM will notice and not just produce an annoying code, it can make the car run like shit until you resolve it. My car ran like shit last time my TAB failed and I'm sure this time will be the same thing.

[@zd302gt]

I'm sure you probably already plan to when you install the headers but might as well put those factory engine lift plates in a box as well. That will clean up the bay more, give you more working room, and save some more weight.

[@KASLCustoms]

Yes, very true 👍

[@AlcoTester1]

Hey I appreciate all of your videos and have learned alot from you. I have a question about deleting all of this. I have heard that this can clog up your stock cats, change the computer, mess with your EGR and will turn your check engine light on among other things. I have a 86 GT 5.0, any thoughts from your experience? Thanks brother!

[@KASLCustoms]

Hey bud thanks for the kind words! I’ve never heard of any of that or dealt with any of it personally. Technically the equipment was installed for a reason however like I state in the video, I would be interested in seeing someone (that is qualified) to perform a comprehensive review of how all this equipment works in practice and if it does the things it was intended to do on paper/in theory. Keep in mind that no matter what, cats (like almost all automotive parts) have a service timeline and will plug over time. They are not an item that will work like new forever. To be completely honest, if you still have stock cats on one of these cars - and it has any sort of typical miles on the odometer - I would say your cats are “past due” and should be changed. Hope that helps

[@foxfordcatguy2283]

Just remember the size of the short belt, write it down or save the sleeve it comes in. The part number is basically the length & number of ribs. I personally carry a spare short belt for exactly this reason.

[@roodypazoo5216]

My 89 smog pump is going out but I have to have one. The open end of the bracket was not secured to the threaded inlet on the pump itself. I can swivel the pump to have the open end of the bracket line up to the threaded inlet. Seems like it should have a 3rd bolt. I think the bearings are done but it only has 2 bolts securing it. Yours had 3? LMR kit only has 2. 9/16” are hard to find. Thanks for the video.

[@KASLCustoms]

No sir - just two

[@roodypazoo5216]

@@KASLCustoms I got the remanufactured S/P from a place in LA, eBay, works great . They even included the one 9/16” short bolt that is lying on I-70 in Utah somewhere. Thanks for answering..

[@marksnakebit5395]

I bought my 88 GT new and still have it, they're fun cars to drive and will always turn heads. To each his own. I am in the process of putting my factory catalyst back on ( yes I still have them took them off in 1989 ) along with the smog equipment. I wish I didn't throw my silencer in the garbage. anyone still have the secondary smog pipe that feeds the catalyst the from the air pump, I need one.

[@KASLCustoms]

Oh wow - very cool. The sad part is most of this stuff ended up in the bin and is currently sitting at the bottom of a landfill…

[@TheSupernaturalWolf41]

Making me miss my 84, and 87 GT. Still have 95, and 99. But, now I'm looking for Hatchbacks again. 🤦🏼‍♂️Thanks

[@KASLCustoms]

Hahaha right on! I’m always looking too!

[@michaelshipman140]

Thanks for this as there aren’t a lot of vids on the “details” of doing this. I’ll be doing this real soon. Already had my OR H pipe done and need to plug this off and remove the pump.

[@KASLCustoms]

Good deal! Glad I could help. Let me know if you have any questions 👍

[@Fishbowl5.0]

In car the plates are the only way being the threads get so clogged with carbon. Off the car a 5/8-11 set screw from the local hardware store fits perfect.

[@joeknowz4898]

I know it 2 year old video...I had no problems removing all that smog plumbing and that nonsense thermactor ports. I bough the 2 set screws that fill the ports but I wasn't able to tighten them down. I went to the hardware store and matched up two bolts...( sorry I thought i I deleted this finding out it was 2 years ago.) I replied to another follow up article in more detail. LOL. I had only one problem when I removed the stock headers.. the 2 sided bolt that held the dip stick tube didn't cooperate....the other 15 header bolts came out easy, The bad part was , I put Ford racing headers on it and they rusted really fast. I replaced them with BBK unequal length ceramic coated ones and.BBK H pipe. I already had Flowmaster's American Thunder SS exhaust kit on the car.

[@KASLCustoms]

Nice!

[@mccoyji]

Your alternator needs upgradin... Does you dash light dim when the turn signal flash...?

[@automotiveaddiction428]

I like the old v Grove belts..I'm cheap..use to just by a washing machine belt...10 bucks...now everything takes the serpentine belt.

[@KASLCustoms]

Hahahaha that’s awesome!

[@hotrodray6802]

I just carry an extra belt and a few simple parts, tfi module, etc.

[@scottmichaud7151]

Another great video - step by step details are fantastic…. Only thing is I’m struggling to find any real benefits of doing this (particularly if still running cats); yes a cleaner and more streamlined engine bay is nice… but there’s minimal weight reduction and the parasitic loss is negligible…. Unless I’m missing something (wouldn’t be the first time 🤣)

[@KASLCustoms]

LOL - yes you do bring up great points for sure. For me, its one more thing to have to worry about failing - due to age - that I never want to replace. But realistically, one needs to remove a lot of the plumbing to change the headers so I figured I would "kill two birds with one stone" and just remove it all together.

[@ssgk1983]

There might be different parts availability but the pumps used in F150s of this era are getting harder to find with junkyards being your best options most of the time. For something like this I don’t want to keep digging into things every time it fails and then I head off to the junkyard to find another pump that is 30+ years old with 200,000 plus miles.

[@50beowulf]

Wouldn't it be cheaper to throw a spare belt in the spare tire well?

[@LX-cg1oi]

You can get belt size online from other people that have done it before. Not really hard to find

[@dwestinghouse]

84.5" is the short belt without smog pump for an AC car same length as a non AC car with a smog pump.

[@996TwinTurbo911]

I just bring an extra 82" belt with me. No need for the idler pully IMO. Thumbs up from me either way.

[@damonbaggs3296]

I've recently read about the SMOG systems in these cars (specifically the EGR and SMOG pump) and both systems are "bypassed" and not used during wide open throttle. So as a performance gain, I don't see it making much of a difference. In the same article's I read, if the SMOG pump is removed, the catalytic converters are more prone to clogging because they are not getting properly heated from the SMOG pump system. So, in conclusion, If a guy wanted (or needed) to keep the car emission legal for street use, I would recommend keeping these systems intact and functioning. But...full discloser... I don't have any experience with removing or disabling these systems on these cars... so I don't know.

[@tomreyes4908]

I purchased my 5.0 new in 91 and all smog is still hooked up. In the future folks will be looking to make them original again. This is what happened to the 70's 428 CJ.

[@Morax515]

Hey there I hope you can respond to this. I have a 95 GT and I removed everything except the crossover pipe that connects the back of the heads together. Right now I just have the pipe plugged up but it still looks ugly for me. How did you do it on ur fox? Did you go from under the car or the top? To take off the bolts, that’s my only issue currently

[@KASLCustoms]

Acessing them from the top works for me. Then you bolt block off plates over the holes

[@thelifewithaj3161]

WHATS THE PART NUMBER FOR THE BLOCK OFF CAPS? THANKS

[@nutandboltguy3720]

I’d be more concerned about being out on the road and trying to find a replacement idler pulley instead of the odd size belt. I removed my smog pump, Googled the smog delete belt size, and the guy at Autozone had it.

[@KASLCustoms]

To each their own I guess. I tend to trust bearings over rubber products but that’s just me 🤷‍♂️

[@95Sn95]

Could get that piece of mind by tucking a 2nd belt in the trunk I'm sure you considered that an opted out but hey I get it, my 95 5.0 vert was my mom's who passed away in 2015 from cancer and her husband talked it to go to him while she jaundice confusedand dieing I was heart broke seems so sentimental, but he moved last year and abandoned it in the drive with flat tire and dead battery seeing it I was furious when I found it with some rear quarter damage and lichen growing on the paint n top but it 100% rust free and in good condition other than the other stuff and is 100% original except mufflers and stereo I have done so 98/99% oem I guess it had been winter garaged up untill 2016. Im a gear head that's always had older cars so modding them is no biggie but I like the idea of it being unmolested but it's not that fast and it's pretty quiet even with fauxmaster 10 series muffs.i want to do an off-road x or H pipe and a couple mods, but I want to be able to return it to stock for whatever reason one being emission laws being reinforced on older cars. But a smog pump delete is a mod but I want to leave the tubing in place if I go better shorty headers I guess I could just leave them back there, .my pump seems to be working fine do you think it would free up any amount of noticable power? I'm assuming may see 5+/- hp on am actual Dyno but not the butt dyno. But I could use any extra power with tall gears and the arm stretching 215hp lol, being stock for the moment its not fast but has enough power to be fun especially with a 5 speed and it has great daily drivability and fuel economy its actually get noticably better fuel economy than my 2010 grand caravan.

[@KASLCustoms]

Wow what a story! Thx for sharing. In all honesty. I don’t think you free up much power - if any at all. That said, it’s more of an aesthetics thing for me 👍

[@KeithSaggio]

Everybody says to delete ! but no one explains how to get rid of check engine light !!!!! for 96 obd2 can someone help with that?

[@anthonydelacruz7123]

What did you do about the vacuum lines that you unplugged. The black and white one.

[@KASLCustoms]

I plugged them 👍

[@automotiveaddiction428]

Was that a big crack in the fan ? might wanna change that soon.dont wanna replace way more parts if that comes apart

[@KASLCustoms]

Lol - yes it is. You’re the 3rd person to catch that. Good eye!! I have a new one sitting in the box and will be part of an upcoming video 😉👍

[@fifteen8]

Thanks again for a really good instructional video. I've never seen the air silencer before, and I've had foxes since the 90s! I still have the smog stuff on my mild street car. In fact, I installed a hi-flow catted h-pipe and had 2 "racing" cats added when I put my supercharger on to ensure I would pass emissions. Runs cleaner than stock (according to the pass sheet) and flows better too! But I did than years ago when the H was $250. So it is possible to have performance and help the environment. Don't get me wrong though - that's just my 2 cents.

[@KASLCustoms]

You’re welcome!

[@Oemford91]

great work , was there a lot of carbon in the Smog pipe that connects to the back of the heads? i want to take mine off cuz i think its plugged up, I'm getting codes about both thermactors . I read that if its plugged up you will get codes also i changed my EGR valve and it was completely plugged up and seized. she seems to be getting better gas mileage with the new EGR installed.

[@KASLCustoms]

This one wasn’t totally plugged but they can get that way

[@Cliffdodger]

My car is going as ones. It’s never been touched. Also, should I keep all the parts if I decide to delete the smog pump?

[@SgtSnappy]

Great video!!!! Setting up to do this on my '85 GT. Curious as to were you got those block off plates from.

[@KASLCustoms]

Thank you! You can buy them from lmr.com 👍

[@hluisfer]

Que pasa si solo cambio la banda a una mas pequeña?. Hablo sin quitar todo el sistema, afectaría?

[@majorahole]

Where is the link in the video description where you got the idler pulley?

[@KASLCustoms]

I got it from LMR

[@jeffgallo7880]

Where can I buy the pulley and the block off plates

[@KASLCustoms]

Late model restoration

[@staceysims7270]

I 4get the name of it , but isn’t that little plastic box under the air box but next to the smog pump part of the smog system as well?

[@KASLCustoms]

it’s called a EVAP canister. it’s a charcoal filter that the fuel tank vents to 👍

[@louiebrogdon3729]

Great video. This is on my list for my 88 vert. Any info on deleting the EGR?

[@KASLCustoms]

Thank you. I typically leave them on the car

[@ChuckG92]

Before you go ditching those factory headers, determine if they're a problem. They should be good to 300HP and if you got them out like mine are, you can open the mouth 20% or more porting out all that welding slag the factory left. Shorty headers may not be worth the cost, depending on your build.

[@ChuckG92]

*gut, not got....

[@KASLCustoms]

Stay tuned buddy 😉👍

[@NewEdgeDesigns]

I actually just took the silencer off of my 4.6, I put it away in case I want to put it back on…What extreme powah that gave me…🤣🤣..it does sound better though..

[@KASLCustoms]

Hahahaha so true 🤣👍

[@BARBELLS-AND-BUDS]

Are there any emission related issues with removing the smog pump? I asked because I'm in California. Also, does that smog pump thing make you lose horsepower because of turning the turbine compared to just the pulley but nothing connected? I had the same exact color scheme of my '89 GT burgundy with the gray bottom only. It had like some ugly ass orange stripe sticker thing going on that I had to get off.

[@KASLCustoms]

If youre in Cali, sadly I believe you have to have all the original emissions gear intact

[@davidpalomo5131]

Please put the link to the idler and the cylinder head plugs from LMR. I have looked everywhere. I am currently having a situation with my 87 crown Vic.

[@frmula1fan51]

LMR has a chart with the belt sizes for common accessory drive mods.

[@KASLCustoms]

Thank you!

[@frmula1fan51]

​@@KASLCustomsHaving said that, I agree with your philosophy about finding a stock belt. I put the same Ford racing pulley on my Fox. The $90 is cheap peace of mind.

[@PaulDaFox]

Pretty kool that it still had the baffle in it, great job getting rid of the useless smog pump. Awesome VID🤙🏼

[@KASLCustoms]

I know right!? Thanks buddy! Got another coming today 🤜🤛

[@PaulDaFox]

@@KASLCustoms 👊🏼🏁

[@mooosestang]

Why not get one of the billet pulleys that lmr offers? I'm looking to replace my ford racing plastic pulley on my 06 ac delete and i think these billet smog pulleys might be the ticket. Do you know the diameter of that pulley?

[@KASLCustoms]

I have the billet one on my coupe. I think I personally prefer the “OEM” look more

[@mooosestang]

@@KASLCustoms I'm fine with the black, it's the plastic that concerns me. I spun a cheap metal idler right off the bearing at full throttle the other day.😁 It was a $10 pulley from rockauto. I have a whipple supercharger so there's a lot of stress on the belt. I haven't installed the AC delete yet.

[@mooosestang]

@@KASLCustoms is that a 6 rib belt for the smog pump? I'm seeing some ebay sellers listing these as 5 rib, thought it was 6.

[@cfisher2447]

Really wish you'd tell us what the necessary tools are in this video and other how to videos. Unbelievably aggravating trying to do these things without the correct ones

[@drgfataldeath]

Love the video. Ive watched it like 4 times haha. So is there vaccuum lines or harness you have to disconnect?

[@KASLCustoms]

Yes you need to cap the vacuum lines 👍

[@BudzyFoxMX5]

Thanks for the video! I wasn't planning on doing this, but I am forced to. I have a 1990 SSP that has a factory alternator bracket built into the smog pump, I know it sounds weird. They are fully connected and do not come apart. I have to change the alternator, and since the alternator for the SSP was discontinued once the police cars went out of production, no other alternator fits this stock SSP bracket. So now I have to change the bracket to an LMR one, but the smog pump definitely has to be removed. My question for you - do I just need to plug the other small vacuum connections? I'm pretty sure thats what needs to be done but just double checking.

[@KASLCustoms]

Yes you most definitely do

[@BudzyFoxMX5]

@KASLCustoms thanks bud. Also, I was being stupid and the bracket did come off haha. One more question for you. If I remove this pump, do I need to delete the EGR? Or will everything still work fine if I keep it on.

[@KASLCustoms]

Yes it will all work fine 👍

[@BudzyFoxMX5]

@@KASLCustoms thank you so much for your responses. You're a great youtuber

[@KASLCustoms]

Thank you sir!!!

[@billlilly8526]

Where did you resource the Ford Motorsport idler pulley?

[@KASLCustoms]

Late Model Restoration

[@noahkwiek4774]

Rebuilding one now with all OEM parts. Smog parts are hard to come by for sure.

[@KASLCustoms]

Yeah they are most just hit the trash can 🥲

[@davidantiwan930]

Back when I was a teen I wanted to turn my smog pump into a mini surcharger by pumping air back into the throttle body 😂

[@KASLCustoms]

Hahahaha thats awesome!

[@jonathantinsman4439]

if you still have that smog pump and the bracket and pulley, I would love to get it from you. I'm trying to restore my '90 5.0 and the previous owner had done some mods so finding a smog pump is a pain in the butt

[@KASLCustoms]

Yes I do have it but selfishly, I’m wondering if I should hang on to it in case I ever do a full OE resto… 😬

[@Mattys91gt]

With removing the EGR should I bypass the coolant lines to the EGR

[@KASLCustoms]

Yeah you could

[@markneveu349]

I’m going to attempt to do this now that I have everything out of the way and waiting for parts. Thanks for showing how to do this 🤘🏼

[@KASLCustoms]

Right on!

[@JZ88vert]

I have 88 gt vert still speed density I put bbk shorts and bbk off road catless hpipe and now getting backfire when shifting from 1st to 2nd at high rpms and from 2nd to 3rd sometimes. I read forum that said it's because I have no cats now and still have smog hooked up. Have you herd of this before? And Info much appreciated

[@KASLCustoms]

Hey bud. First question is: what RPM are you shifting at to get a back fire 😂👊. That’s some high rpm brother. Lol all jokes aside, have you checked your timing? I can’t imagine that it has anything to do with you still having your smog pump still hooked up. Honestly, it’s just an air pump that pumps air into the heads and exhaust.

[@survivethrive2468]

I really enjoy all your vids buddy! I am starting a AOD to T5 swap on my 1988lx 5.0 vert and interested in doing this smog delete setup as well. My question is did you remove the charcoal canister and evap stuff as well?? the purge valve and all that too line from upper intake manifold down to evap ? just plugged it all off or? I am not sure if your year vert would differ from my car and the factory set up since my car is a speed density car . Also when you removed all smog stuff did you worry about getting a check engine light code on the dash? I started pulling my h-pipe tonight and noticed i have that long smog tube attached to my h pipe that goes up above passenger side header and its kicking my ass to remove from the car from the bottom just using floor jack and jack stands, god I would kill for a lift lol fat guy problems lol hahaha too much beer and pizza and tight fit under the car. I have heard guys say just cutt that smog tube off the h pipe but not sure if thats a hack way of doing things. How in the hell did you tighten the h pipe bolts and nuts to headers lol. its so damm tight clearance wise in my car. Maybe after i get that big bulky AOD out my car and the T5 in there will be more room! cheers from the states down here in Maryland brother! thanks any input much appreciated.

[@KASLCustoms]

Hey pal thanks so much for the kind words!!! 1. Keep the evap stuff 2. Cut the line that goes the the H-pipe. If you don’t need to cut it, you’re a better man then me 😂 3. No need to worry about a check engine light by removing the smog pump. There is no electronics tied into that system. Just plug off the 2 vacuum lines 4. Get yourself a good swivel socket and some extensions and you’ll get those bolts tight 😉 As for the beer and pizza - I like your style 😎 Thanks for reaching out and I hope this info helps 👍

[@survivethrive2468]

@@KASLCustoms thanks a ton brotha! Hopefully get to catch u at one of these shows sometime buy u a beer 🍻 cheers from Maryland 🙏

[@KASLCustoms]

Anytime my friend! 🍻

[@chrislambert7137]

Where are you located? I have a 1985 GT that would to have a bunch of work done to it.

[@KASLCustoms]

British Columbia Canada

[@BrailsfordsRides]

I opted for a shorter belt

[@CollideFan1]

Nice clean virgin car to modify, don't see too many of those around. Had a 90 LX 5.0 5 speed back in the day. Didn't do anything that because I was young and poor. Finally got another sports car after so many years, a 94 SN95 GT convertible. Nice virgin car with low miles and all original. I was looking for another Foxbody, 90 LX just like mine but this one popped up and it was at a good price so I couldn't let it go. Unfortunately its an auto. Slowly doing some mods to it. I would imagine this has all that smog pump crap like the Foxes.

[@edgaralvarez1105]

Hi my car is making too much smog, if i do this like you did i can pass smog...??🤔🤔

[@KASLCustoms]

The smog delete will “technically” make your smog readings higher. I think you’ve potentially got larger issues in which your car is running too rich

[@Glenjholman]

How’s that pulley on that ford smog delete set up? Looks like plastic. Any concerns towards belt tension on that pulley and bearing?

[@KASLCustoms]

It’s a ford racing part so I’m assuming it will be good 👍

[@GamertryPrime]

Smog pump delete alone is around 84.5" belt got mine at autozone for under $30

[@rb4868]

I live in Texas and was wondering if this mod would mess with my smog/ emissions inspection

[@KASLCustoms]

Hi there. To be totally honest, I’m not sure? Maybe someone could chime in and lend a hand with this for us 👍

[@houseofno]

In Texas, vehicles twenty five years or older are exempt from emissions. Generally speaking, all Fox bodies are emissions exempt by now.

[@Playstation1st]

Is there anything that has to be done the the electrical system to avoid any drivability issues with deleting this smog pump system?

[@KASLCustoms]

No nothing at all

[@5oh.ghoull]

The hose that connects to my exhuast isn't connected, causing a major leak. Why I'm deleting it, I go 0-60 in about 12 sec. About 50% power right now because of this. I've replaced everything fuel, air, and spark related. I'm just now discovering that this is the issue... Could this of caused any major damage to my heads and anything in that area?

[@KASLCustoms]

I don’t think so

[@tyron01]

Do you know where I can buy those block off plates? Part number?

[@KASLCustoms]

@latenodelrestoration sell them 👍

[@sHiFtY-5-oh]

man you have such a clean fox there it just a wows me! I haven't seen one this clean for a long time that is a survivor car I know you've spent a lot of time on it and looks amazing I love it & the 17-in ponies are the best way to finish the exterior off I wouldn't change a thing appearance wise!

[@KASLCustoms]

Thx buddy!!!

[@chrisrye9128]

Does the ECM need a new flash to compensate for the smog pump removal?

[@KASLCustoms]

No not at all 👍

[@chrisrye9128]

@@KASLCustoms can that smog system cause annoying vacuum leaks? I'm currently struggling thru troubleshooting those now. Replaced most everything else at this point.

[@KASLCustoms]

There are 2 vacuum diaphragms that are in the smog plumbing. They need to be plugged if you remove the pump/plumbing 👍

[@i-tiyahman6519]

Don’t over thigh you can break this cast aluminum pulley

[@usynthesis4749]

Hey! Two things! What about the charcoal canister and everything that connects to it? And also, I was under the impression that the EGR system circulates gas fumes back into the engine in order to conserve fuel consumption. Won't you notice less gas mileage removing the EGR system? I've ran mine both ways. I really feel like the EGR system saves you a little on gas consumption. I know most people prefer horse power over gas consumption. What are your thoughts?

[@MainelyCannabis]

Smog and EGR are different. This pump just helps start up I believe.

[@TheHragpailian]

what should i do with the remaining vacuum lines?

[@KASLCustoms]

plug them

[@philolen481]

great vid --- what do I see in the back round a firebird / bandit car with maybe a 400 in it ?

[@KASLCustoms]

Hahahaha good eye buddy!! It actually is a Bandit car. 1978 TA, with a 400, and a 4 speed, AAAANNNND T tops 😳😁👍

[@philolen481]

@@KASLCustoms I new it Very Coooooool -

[@KASLCustoms]

😎😎😎

[@inaktiveshooter]

Found a FOX that OG.. Cant believe your even doing this. LOL I just pitched it all and wrote down the belt sizes based on different configurations. The only reason I ever found to use that pulley is to prevent the PS whine that comes with it.

[@rickroach6925]

Can I get the part number for the pulley? Thanks

[@ForcedFoxbody]

You can remove the smog pump and just use a shorter belt. No extra pulleys needed

[@24theMoney]

Will this delete trigger any engine/emissions trouble codes?

[@KASLCustoms]

no

[@jonathongriffith279]

Did you have any issue with running or CEL when you had it capped off?

[@KASLCustoms]

No nothing

[@jonathongriffith279]

@@KASLCustoms I’m going to be removing the smog pump and EGR from my ‘92 Feature car this weekend

[@Nykcomer03]

What’s the part number on the idler pulley?

[@KASLCustoms]

I can’t remember but I bought it from Late Model Restoration 👍

[@brandonsalvati2775]

Where did you find your off-road H Pipe. Did you already have it? Can’t find any for sale in the states.

[@KASLCustoms]

I found it used locally 👍

[@jeffkrug9045]

What do you do with the vacuum lines?

[@KASLCustoms]

Cap them

[@VansenJenessa]

Look at all the room for activities! Great vid and it helped me get mine out! CANADIAN SUPERMAN APPROVES

[@KASLCustoms]

Yessir!

[@billcruickshank3546]

Can I put the smog pump delete kit on and still keep original exhaust and cats

[@KASLCustoms]

Hello sir. Yes you definitely could, you will just need to “block off” lol ge tubing that feeds down to the cats and to the back of the cylinder heads 👍

[@billcruickshank3546]

@@KASLCustoms great good to know thank you you have a lot of super videos thanks again

[@billcruickshank3546]

@@KASLCustoms PS mine is an 88 GT t-tops hatchback had about 30 years always garage kept my airbox in fender is not in fender it is on a shelf I did not throw it out it is 76,000 original miles love the car

[@KASLCustoms]

You’re welcome sir 👊

[@KASLCustoms]

Oh wow!!! That’s amazing. Make sure you keep that beauty! Thanks for all the kind words too 🙏🙏🙏