GET This Done to SAVE Your CUMMINS ISX X15 ENGINE! Day In the Life Trucker VanLife off grid sail wwe

[@jeremynewhouse6530]

Messed up my life pretty good when I was a young man, been clean around 7 years now and I am starting CDL school in the next week or so. Thanks for making these videos and for staying positive.

[@JustTruckin]

Prayers for your journey Jeremy

[@davidhickmon2182]

It doesn't matter your better for it God Bless 🙏.

[@Arty_left]

Good for you brother!! Best wishes 👍🏻

[@koreyking9116]

Congrat's bro. You are not your past. Stay in the moment and keep looking forward.💪💪💪

[@hellkitty1014]

Godspeed Jeremy! It ain't where ya been, but its where ya going! You've already done the hard work of laying the foundation of repairing your life. Now the fun begins!

[@stevecraig3004]

How wonderful it is that: A) There are people like Haggai in the world; B) There are people like you who appreciate people like Haggai, and C) That we get to learn about it. Thank you...

[@dirttherapy24-24]

i love the small shops that have family atmosphere, They did you right.

[@christophergreen1908]

I got my CDL Class A learners permit and today enrolled in AAA CDL SCHOOL. I am looking forward to beginning this grand new adventure. Blessings to you and your family. Great Channel 👍🏻

[@bigguy78246]

The locomotives I work on the valve job is done the same way. It’s just a bit bigger. They also take just a bit more oil then a truck. We do a running check on the EMD’s with the covers open checking for oil flow and water leak. The ring your liner sits on I believe is the fire ring. Thanks for showing the journey.

[@203-d-max2]

Taking my class A test this weekend, you were one of the influences that got me into trucking. Love the videos!

[@philipdenner8504]

just always remember, never let your aspirations surpass your capabilities.

[@chillwill842003]

@@philipdenner8504 thats a bad mindset

[@Royal18s]

@@chillwill842003I mean not really, that’s actually good advice. In other words don’t run before you walk. Know your limits, take things slow , you’re still learning and everything will come in time.

[@Royal18s]

Hope you’re doing good out there, i know thus video is old

[@Nixon395]

Just got overhead done on my cummins truck runs smoother and gain some power back!

[@dannygregg3906]

I don't know how old that young man is there but he sure knows his stuff. That's really cool.

[@lydiaanderson7226]

@Hello Danny how are you doing?

[@phillee2814]

A mechanic you have to pre-book is a good one, as they'll always have more work than hours to do it in. Just a little tip for finding the good ones! Haggai seems to be a really top shop. BTW, for ultimate protection it is worth considering a centrifugal oil filter, as they actually centrifuge any contaminants out of the oil the same way a laboratory separates samples. Even better, you only need to clean them, not replace them! Another worthwhile add-on is a pressure accumulator, which puts oil pressure around the engine before you start it, then refills slowly as the engine is running. A solenoid valve cuts it off when you shut it off, keeping the pressure in the accumulator and opens again when you go to pre-heat position on the ignition key, pre-pressurising the oil system.

[@henryg683]

Nice to have an awesome shop like HAGGAI in your life for sure!!!! Glad you have them to keep you on the road and keep your truck running like a swiss watch!! See you back out on the road have a great day and I’ll see you tomorrow or later!!!!!! Merry Christmas to everyone at HAGGAI and a HAPPY NEW YEAR!!!!!!

[@hellkitty1014]

These guys could teach Cummins Engine manufacturing a thing or three. Haggai is a godsend for the O/Os out there. They are extremely knowledgeable, thorough, and honest. I remember when you said that let you camp out for 6 days. Not all shop owners will do that, not even for FAMILY!🤣 Little by little, your K'Dub is becoming a masterpiece on wheels. LOVE the accessories. They're not garish but very appropriate. Justin, be sure to catch that nail in your driver steer axle tire!

[@dansdiesel767]

Less micron is better not more micron just so you know anything 10micron in size can go through your filter if your old one was 8 micron it would protect you down to 8 micron

[@Bouncer77]

Just watched the video and came here to say this!

[@lepe7841]

I agree, those new lights are AWESOME. Stay safe.

[@donaldmcfarlin7735]

You are great person, that is why all these great people and to things come your way!!! 💯💯💯Your support is real!

[@frfrpr]

This guy puts up positive and fun videos. I love this channel

[@waynesalkeld8419]

Great video very entertaining reminds me of when i worked on trucks over 50 years ago. I then went on to drive them for 45 years in the uk and Europe. I particularly like how you take the family with you to Florida for hols ,We went to Disney with the kids Magic.Until Covid-19 my wife and I went to Venice Florida most years,good times,hope to be back soon.Laters

[@JustTruckin]

This is awesome Wayne 🙏🏽

[@caburg93]

What an awesome mechanic! ❤️ Thanks for sharing 😊

[@Byron_Thomas]

Some stuff on the truck that we don’t really need but it looks cool 😎 😂. They all seem like great people Justin. Long drive from Western Colorado in a day cab but I’ll throw their name to my OTR friends.

[@nickieg43]

That girl at the shop really knows her stuff, daaaamn

[@luissantana8091]

you're really humble person

[@bighank1990]

I get my overhead adjustment annually as along with the steer tires.

[@TruckingWithMack976]

Thanks Justin. Looking in to buying my 1st truck. Those guys at Haggai have a new customer. Thanks for the info that you put out. Be safe driver...

[@greglynch3662]

Good people running a honest business.

[@ПавелЗыков-в7и]

Respected from Russia Bro! Thanks for amazing shop!

[@lowcountrylife4720]

I been watching you for a while, glad you didn’t give up, hell I done totaled one , had one repoed cause of break downs & now currently in my third truck with about 13 more payments on a 3yr note , I’ve done been through the ringer with trucking but still chasing my dreams.

[@Jabows1020]

I feel your pain. Keep pushing through. I’ve had 2 trucks and like you, my first truck I let go back after 2.5 years of owning it because of DEF / REGEN issues. My second truck which I still have has had 2 Rebuilds and 2 months ago just got a Recon’d motor via Cummins because after 2200 miles after the second Cummins OEM rebuild, my motor locked up and they couldn’t figure out why. So trust and believe I feel your pain and I’ve thought many times about going into something else. But trucking’s in my blood and I’ve been doing it too long at this point to do anything else. If I may quote Gospelmatrics that said; “Pain has a purpose.” “Because struggle is the proof that you have not been overtaken by your enemy, struggle is the proof that the enemy is not bigger than your God.” “Because the fact that you’re still struggling, and the fact that you’re still fighting is an indicator that there’s something MORE AFTER THIS!!!” God bless. 👍🏾👍🏾

[@lowcountrylife4720]

@@Jabows1020 , damn , that’s well said my brother, hope to keep on keeping. Stay safe & Merry Christmas

[@Jabows1020]

@@lowcountrylife4720 Same to you!!

[@paulnapier2881]

Very informative Justin and I don't even own/ drive a truck. Keep on keeping on buddy.

[@davemachoukas6175]

God bless Haggi they seem like good people

[@donwat91]

That is a beautiful truck. I see white is the color of today specially when you put all that chrome on it. Thanks for sharing.

[@Harry-zz2oh]

White is one "color" which does not show dirt as much as the dark colors, especially the black. If you are driving mostly in hot areas like the South or South West, white would be much better to have since it stays cooler by as much as 40° F. This means your trucks A/C runs a bit cooler and your reefer would not require as much fuel. It may not be much but it would save you some money.

[@cristophercahill9606]

The W9 is looking good!!! Great job Justin

[@JustTruckin]

Thank You

[@cristophercahill9606]

Hope all is well with you brother happy holidays

[@DannyWalker247]

Justin we have a new 2.8 million square foot Amazon fulfillment center coming to Daytona Beach. It will be just off of I-95 just South of the race track and airport. Right across from the dog track I mean poker room. Will create 1000 jobs when fully operational in about 2 years. That Allison at Haggai just knows all of the tricks. Amazing.

[@lydiaanderson7226]

@Hello Danny how are you doing?

[@parrott350]

awesome ! seeing " 316" roll out of the shop! That has to be the best number for a truck : ) I smile every time I see that. best regards, sam

[@JustTruckin]

🙏🏽

[@leisaanderson1139]

Allison is unbelievable, she was blowing my mind. That is just one example of showing anyone can do anything if they put in the work. Great video. God bless and be safe on the road. :-)

[@skid3339]

R it sdd daI

[@michaelerb9143]

LF14000NN, FF5825NN, the best filtration for oil and fuel for the ISX, and the X, per guys in the know.

[@davidspez7267]

Valve spacing very helpful information. Love the channel and thank you man for what you do. 👍😎

[@schwags1969]

That woman definitely knew her machines.

[@cts-video]

Ha....that's cool DIY Semi and JustTruckin ....that was cool.

[@JustTruckin]

😎🤘🏽

[@excavatoree]

I always stop at that JP, but I've never seen you or DIY Semi there. I just missed Steve Feszchak and Orwell going through my area, too. I'm havin' no luck.

[@jaydee3265]

Justin, Great teachable VLOG on adjusting the valves. But notice around 16:25, it appeared that there was a nail/screw in your right front tire.

[@codexic]

I think that's just a washer from the thing he was taking apart

[@BloodSweatandGearsGA]

It was a washer

[@maxpuppy96]

Liners can also jump head gasket will leak, liners jumps up and down slamming into the head.

[@Jabows1020]

That’s what happened to mine on liner 5. Didn’t drop but had protrusion, which as we know put coolant in my oil 😳😬. Rebuilt twice. First aftermarket 🤷🏽‍♂️, second by Cummins, then came the Recon.

[@tdadp]

Lotte man is so adorable you are bless with amazing family .

[@staceydavis2016]

The KW 900 looking good with the new lights great content.

[@robertribley5799]

Great Video Thanks Have to get my truck up there

[@ronpeacock9939]

stuff you don't really need... the real question though is... did you replace the 2nd fuel tank sending unit? Working fuel guages I would qualify as a need...

[@bryanmitchell5728]

This could be used in high schools. For the kids college bond. Though I wanted to truck.

[@MrNephew8]

Man THANK YOU for this video.. yeah a lot of yours help but THIS one REALLY helped me learn.. So thanks J!🙏🏾👍🏾

[@BrianMcGilvray01]

The 8 µm filter provides better filtration than the 10 µm filter. The micron size is related to the particle size the filter will allow to pass.

[@manuelluhanga]

Love em too. Wife n daughters good people too.

[@drcdrdoct9864]

I ran by this morning around 9 but you were already gone. I have a business in downtown Griffin if you ever need to leave your trailer somewhere. I saw you backed in last night. Truck looked nice and clean for sure.

[@JustTruckin]

♥️🙏🏽

[@rickylambert7104]

Very sharpe looking KW love the video and the family. Those boys are wide open drive safe and stay bless

[@Stephen-carr]

Update on my breakdown other day. Fixed fill tub and made it 50 miles and new front seal went out. Just ended up doing new front lower gear cover and seal. Test drove and all appears good. Heading to Texas Saturday

[@1990Ravens]

Truck looks amazing!

[@50something67]

Your W9 is bad ass! Congrats!

[@cpenhaligon]

What a engine just love ❤ that sound brilliant video Justin safe trucking 🚚

[@lydiaanderson7226]

@Hello Goldilocks how are you doing?

[@SuperBighead1973]

You better hold on to as much T6 as you can right now. I work for Autozone, and we can’t get any. T5 and T6 are few and far between at the moment.

[@Propertyinspector]

Have a blessed day Sir

[@LT.X380]

The KW is looking great. Drive safely my friend. God bless you 🙏.

[@kyleh5338]

The truck is looking great. Be safe and god bless

[@tonyringtail]

Geez I missed ya at JP I’m there all the time for the scale and how clean the place is plus they’re all really nice in there

[@dmorgan28]

Awesome video. Thanks👍👍👍❤️

[@NSghostoif5]

Thank you for info, hope i could find mech here nw like Haggai. When time comes I was set on Detroit but you making me a believer in Cummins

[@bikertrucker7950]

All the little add on's you are doing Justin to the truck .... so cool 👌

[@justinedwards3215]

I try to watch every video u every post n like them too I been following for some years

[@JustTruckin]

Appreciated Justin

[@sludo56]

Giving credit where it's due keeps you humble and connected to our creator.

[@goodlifecitytrucker]

Get you a ops and do oil samples. Get a fass fuel system to polish that fuel and last but not least run Max Milege fuel catalyst and you will be golden on that. Cummins

[@elijames3041]

Safe travels

[@angryyank]

I have never heard of this fancy word you used...... "Overhead" 🤣😁🤣

[@johncoleman5128]

W900 looking good my friend 👍👍💯💯😎

[@mattyc195]

Great video and thanks for sharing.

[@dhldriver7746]

Sweet lights

[@rjj08]

welcome back to my neck of the woods. i wish i knew you were coming down i could have met up with you

[@JustTruckin]

Hey Joshua was a last minute decision 🙏🏽

[@rjj08]

@@JustTruckin i understand

[@jameshood3692]

FYI, it's 3/4 inch to bar the engine over through the front cover

[@lydiaanderson7226]

@Hello James how are you doing?

[@robertbradford7892]

Those backlit emblems are sweet!

[@Nxsai]

diy semi is awesome

[@nunyabuziness8421]

Paint makes everything brand new 😆

[@bigsky33]

Valve adjustment in isx is simple. I do mine every 6 months.....not necessary... mainly just to keep an eye on everything up there

[@davidhickmon2182]

You need shocks on the front plus maybe an alignment. And check the shocks on the back and alignment. You can also check cab shocks. And get new front tires and check the tire pressures every two weeks. And have them jack the front end up when it greased. Use one gallon of any old style trans. fluid once every two months in each ⛽ tank to keep fuel pump and injectors clean and lube. Did it in 7 T 600 at one time for 12 years never had to change one ever, and only lost one trans. due to shop not putting line supports back on after clutch job. Never lost a engine ever in that time also witch equaled about 1,250,000 to 1,450,00 miles on each truck with their being 17 different trucks. Run the rack every 18 months and change the oil in rear ends and trans. Plus use a good oil staplelizer at 10,000 miles when most trucks use a gallon. Change antifreeze every two years and change water filter every other oil change and lube the water pump every other oil change with a good additive. Just worked for me 😃. God Bless 🙏 and Merry Christmas ☃️🎄.

[@waynecribb4922]

The lights look very cool. Nice work.

[@ponomohometogo3908]

Merry Christmas

[@lamwen03]

Strongly suggest you DON'T use vaseline on any rubber gasket. It degrades it. Use a silicone lube. You can get the stuff for pool filter gaskets.

[@diesel266]

She’s lookin awesome 😎🤙

[@JustTruckin]

Thank You Bud

[@cwg1998]

Best thing for those isx engines is getting rid of the emissions junk and that vgt turbo then you’ll have a runner

[@piratetreasure]

Tappy valves are happy valves!

[@williambault2469]

justin your VIP and your a cool dad

[@JustTruckin]

🙏🏽☺️

[@salvadorcallejasii842]

Hey did they change the gasket on your air compressor too cuz I can clearly hear the clicking? Just did front cover and all the gaskets on my 579 with a CM2350 and I swear it got louder after they replaced it.

[@samyb2285]

Wanna save a Cummins get rid of the emissions it'll run forever

[@AB-mg5sx]

Just had my valve adjustment done few months back, manual says to do it at 500k miles

[@wangfei7737]

Pro mechanic

[@tamipotirala6973]

Griffin, ga right up the road from haggai diesel with Jerry McNeely

[@JustTruckin]

Yes

[@froat1]

I don’t know if you just said it backwards but an 8 micron filter is finer (better) than a 10 micron filter.

[@DJPLAST2]

I see a new sun deck/balcony just out side of the bathtub in the near future for those active boys! Keep an eye out for the first time it happens!

[@Robert-lg2bl]

Awesome truck!!

[@americanpng8130]

10 Micron allows more dirt to pass through the filter than a 8 micron filter

[@billwilliams9527]

Can't even find Rotella T6 5/40 for my motorcycle these days. I'm about to give up on the brand.

[@JustTruckin]

Yeah it’s sold out 🤔

[@faapilot]

That gal knows her Diesel engines.

[@safetyfirstintexas]

Raising a liner so when it drops it ends up where the old one started. Headgasket squish is a big deal

[@geraldbraxton2555]

Dont forget your Lucas oil treatment.

[@jacobbartanus8602]

what year is your w900l and where did you purchase? if you made a video please direct me as well.

[@hamwallet7069]

You’re checking valve lash. Common practice to not prefill oil filter Becuase you’re putting in fuel that hasn’t been filtered. Your lift pump will push the air out and fill housing. The lube on orings is so your orings don’t bind when you’re screwing them on 👍🏼

[@hamwallet7069]

Prefill fuel filter sorry 😂

[@hamwallet7069]

And whoever told you to use t6 shake their hand. Look into hot shots secrets fr3 or any of their fuel additives. Thank me later!

[@Jake-n8w6o]

How exactly would a 10 micron filter be better protection than 8?

[@shanester8712]

Did you get that being at the chrome shop in white pine Tn? Ex 8. You mentioned stopping on way back home from Greeneville last month

[@JustTruckin]

Yes