Getting Started With HP Tuners MPVI2+ Pt. 1 - Connect

In part one of the MPVI2+ series, Bob explains how to connect the HP Tuners MPVI2+ using the supplied cables along with setting up software.
If you are looking for info on how to get started with HP Tuners, this series is for you!
To purchase HP Tuners MPVI2+: thetuningschool.com/collectio...
#tts #knowledgeishorsepower #mpvi2+ #hptuners #techtuesday
----------
For more High-Performance Tuning Knowledge #HPTK
Check out our website: thetuningschool.com/newtuners/
Be sure to follow us on
Facebook: / thetuningschool
Instagram: / thetuningschool
Produced by Tuned Media - tunedmedia.com/

[@TheAndrewBailey]

Great work!!

[@ArcticZ1]

Solid 👍🏼

[@independentassesor2630]

Will the current hp tuners monitor knock on a subaru wrx 2012 model? I tried using the old version and there was no provision for knock in the logger

[@rockabichebel]

If i need to link my mpvi2+ to afr i need pro feature or just prolink cable?

[@UNLEASHED1198S]

First video to mention wiring up the pro plug in!

[@coongang7019]

whenever i connect the mpvi2 to the car it starts flashing my dash also it doesnt connect to the car "finds no power" all fuzes are good and i have drivers it worked well first time just not when i tried reconnecting the next day

[@paadedon]

Can u people do e98 adblue off?

[@mofeedgirges9439]

So does this mpv12+ works with bmw or only American cars

[@1978ramcharger1]

I'm a little confused I bought the MVI2+ mine didn't come with a thumb drive and also I have a wide van O2 sensor but I can only use it if I buy a special cable and upgrade to the pro for $250 I really don't see the reasoning in giving you the port on the front of the device that plugs into your OBD II port if you can't use it I feel taken also the guy in the video doesn't say anything about having to upgrade to the pro version either

[@KillinItWithFire]

?? He talks about it at the 2:00 mark. Also, any site I've been to talks about needing the pro link and pro upgrade if you have a non-canbus vehicle.

[@ronbown3836]

So I was having a hard time doing the vehicle reader so I found out that I had to close the file before the vehicle reader would work

[@TheMasterofsparks]

Thank you, saved me from pulling out any more hair!

[@brewaire]

Do you have to physically send in your PCM to HP tuners to have it unlocked or can you unlock it with the MVP12? Thanks.

[@hondaservicecenter]

Depends on the ecu

[@fmangua]

What is the difference between RTD+ and MPVI2+ ?

[@jasonkennerly1744]

RTD is a remote only tuning device. You cant modify a tune; it's for reaand uploading only.

[@dave5833]

Thanks for another great video. Does anyone know the name of a device that “senses” race fuel going into your motor and adjust the computer to change the settings? It cost about $300.00. Thanks and have a great day.

[@stevenwolfie]

Octane sensor I believe

[@dave5833]

@@stevenwolfie thanks for your reply, do you have any further information?? Merry Christmas to You and Yours

[@kennethcolemans1328]

flex fuel sensor

[@dave5833]

@@kennethcolemans1328 Thanks for your reply is that what it’s called?

[@dave5833]

@@kennethcolemans1328 where can I buy one?

[@russwithrowjr]

I never got a flash drive with mine. Did they stop including them?

[@jasonkennerly1744]

Correct, HP Tuners no longer includes the flash drive. The updates are so frequent that they were outdated before purchase.

[@michaelbaskinmichael9862]

What all can I read I know I can read chevys but what about imports like a bmw

[@TheTuningSchool]

HP Tuners has a pretty large list. BMW is currently unsupported. But, you can see the entire list here www.hptuners.com/vehicles/

[@notmyrealname121]

so i downladed the free software, but what I actually need is a cable $46 bucks, a MV plug thing $300, and then buy credits to use it... fantastic

[@a007raptor_3]

My kit didn't come with a usb

[@REDLINEBECKONZ]

Flex fuel sensor?

[@mooremaceo]

If you can't even plug into the OBD2 then just stop there.🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️