Getting started with SuperTrickler powder trickler measure

[@scottupatree3356]

Man this video is awsome, after watching this it put me right on track and was throwing perfect loads in 15 min . A picture is worth a 1000 words ! Thanks Buddy !!!

[@FClassJohn]

Glad it helped!

[@jamo78s3]

I found this video very helpful. Thank you. I used mine for the first time today. I didn't know about these features until I watched your video. 😂

[@mikekuzia2909]

Thanks for the videos! I appreciate what you do for us shooters.

[@308loneeagle7]

Thanks for posting this video. It demonstrates the value of the self-learning feature well!

[@longbar105d]

I have one on order, all the information will help. Thanks buddy!

[@marfoster8091]

Hey buddy, I just got the SuperTrickler 2.0 and was wondering if this is all the steps to set-up. I did not get a manual with mine so I have requested one but i am super anxious to get started. Thanks

[@sms9106]

Where can one buy one of these?

[@MrKenforde]

Hello :) I am really liking your video on the Super Trickler powder dispenser. Where can i get one please ?

[@tran0317]

Thanks for the hard work. Keep em coming.

[@claytoncarroll7260]

So looking at the Super Trickler page they list a couple of higher end models. The ST101G2FX ($1,465) and the ST101G2FZ ($1665) BUT nothing makes it easy to see why there is a $200 dollar difference. Would you know the difference? Thanks. Good video.

[@FClassJohn]

Thank you. The $200 more is for an internal calibration weight scale vs the external. That’s all

[@Nonedw]

Maybe I missed it but do you have to do this learning process every time you try a new powder?

[@FClassJohn]

I haven't tested a lot of powders yet but I'd say that if it's a similar powder you're probably safe but really the beauty of this unit is that you can do with every powder you want and then save it each time so you're creating a giant database for yourself.

[@yd8hw]

Would recommend setting focus to manual..

[@FClassJohn]

Sorry about that, I meant to do it after someone complained on the last video. I'll work to get that resolved. I totally understand how annoying that can be.

[@firearmconvention946]

My first comment to myself was "This looks expensive " 🤣🤦

[@TrevorCazes]

ok john. i value your opinion over most. now that you have had some hours on the super trickler, what do you think? could you do a long term review video? im ready to either get a second charge master supreme (has been 100% reliable, accurate and fast as hell) or upgrade to it+ a super trickler on the bench. figured id get your honest review first!

[@FClassJohn]

I still think the SuperTrickler isn't without it's faults but I still stand behind it as a good machine and has a place on many benches (the same can be said of the AutoTrickler V4) BUT to be fair, if you're happy with the CMS I think you'd find more value in having a second one for several reasons. No powder thrower is perfect, they all have their quirks and for me the most important factor is consistency of machine use. I have a variety simply because I'm testing but personally I would NEVER have different machines if I was just loading. I'd want them all the same and like I said, if you're happy with the CMS, just get another one and keep on loading.

[@mauropizzipaulo8319]

Good night Can the Supertrickler be mounted on an AND Model fx 300i scale? greetings!

[@FClassJohn]

It should be able to. It's the same scale as the 120, just lets you go higher weight. I've used both with the Autotrickler so I can't see what it wouldn't work but I would email them just to make sure.

[@williamwilson5876]

Hey John. How about a tutorial on setting up scale with the super trickler? I'm sure it would be helpful

[@ruffen1365]

The step are in the manual. Not hard and takes max five minutes

[@Forumrida38621]

Man this thing is so awesome 👌

[@whiplash636]

I'm starting to think the reason N555 can't be found is because it's all at John's place.

[@FClassJohn]

😂 not even close. I literally have less than a 8lb jug left.

[@whiplash636]

@@FClassJohn Uhg, that blows. Hopefully there will be some drops sometime soon. I'm about out myself.

[@FClassJohn]

@@whiplash636 I’ve had some on back order since July so fingers crossed we see some before the end of the year.

[@lanceschul]

John who is the US Distributor or where can you buy these? I am having trouble figuring that out...

[@FClassJohn]

There's no US distributor. You have to order from Denmark.

[@jamo78s3]

Does 35 seconds seem a little long I've had it on learning for 38 rounds with 70%success rate. I'm using n160 powder

[@Sagaris380]

So what's the benefit of this instead of the Autotrickler?

[@jawedumer357]

How do I order one and how long will it take 1:39

[@FClassJohn]

First line in the description has the link.

[@nineteendelta770]

Great Video

[@gorillamotors]

Which do you prefer the autotrickler v4 or the supertrickler?

[@fasteddie2413]

If you're doing a ladder of, say, 10 different loads of 5 each, does it remain as accurate as the loads increase?

[@FClassJohn]

Absolutely. I'll be doing a video on that feature next.

[@shanekepler6842]

Are these currently available for immediate shipping?

[@FClassJohn]

I don’t know what their back order is on them but they are shipping. supertrickler.com.au

[@thompsonjerry3412]

Will it pull the trigger!

[@PrecisionRifleSloan]

Do you have any solid settings for varget and h4530? I’m struggling with them

[@FClassJohn]

No I'm sorry I don't. I'm not using either of these powders but you should've have to wait very long before a major firmware update is going to release and it is amazing and should make your life a lot easier.

[@justinjacobson7555]

Man where did you buy this? I’m having a hard time finding it

[@FClassJohn]

supertrickler.com.au

[@1clnsdime1]

What is your name on the Hide?

[@FClassJohn]

F Class John

[@cristitirea254]

Every time your hand moved was defocused the image from screen

[@RockinRack]

I would rather just have it take a little more time than have to teach it for a year lol

[@johntruesdale1612]

you pay that much money for a trickler to be accurate down to the hundreth of a grain and it rarely gets the load perfect.. why settle for .02 off when you buy a scale to get it perfect?? if you want to be off less than one tenth, then you don't need this one. just get one that reads 000.0

[@davehamzee]

I should have listened you more carefully international company that happens to be europe is really hard to work with the tech support is very poor

[@Nonedw]

Stop talking with your hands in front of the camera/ screen of the super tripler. It makes it blurry.😊 do keep up the great work though I appreciate your channel

[@FClassJohn]

Sorry about that, I meant to do it after someone complained on the last video. I'll work to get that resolved. I totally understand how annoying that can be.

[@goneflying3220]

After trying to deal with Rex I would not buy one of these. He was a big stink bomb. I will stick with an Autotrickler. Made in North America is better!

[@bertkraan2817]

waving your hand in front of the autofocus is kind of nauseating. Info is great though.

[@FClassJohn]

Yeah, a lot of people felt the same way and I forgot to set the manual. Focus on that video. Sorry about that.

[@kenbell8752]

John, did you not review this video before you posted it? Every time you waved your hands in camera there was a focus shift that was so annoying it started making me nauseous. I could not finish watching the video. I was disappointed, because I am interested in this product. Please consider this in future productions.

[@FClassJohn]

Yeah several people have commented and I guess it's worse than it looked to me and I'm sorry about that. I have fixed the camera for future videos and truly apologize for the focus back and forth on it.

[@kenbell8752]

@@FClassJohn thanks John. Keep up the good work!

[@2ndamendment-noinfringement]

So exactly how did this issue change your opinion of the product? Made you nauseous really? Wow.

[@kenbell8752]

@@2ndamendment-noinfringement I think the product is great. And since then John has put up other videos that don't bounce back and forth. All good now. And yes, I really was nauseous, but that might just be me.

[@dariuszbiernacik2004]

nie machaj tymi łapami🤐

[@maxcoatlhunter4322]

$1375.00 🙄

[@briansmith2125]

What are the little clear covers you have on your scales? I don't see those available on their website.

[@FClassJohn]

Those came with my FX120 scales when I bought them.

[@briansmith2125]

@@FClassJohn I knew I probably threw something away that I shouldn't have.