Getting your Super Safety up and running

Hoffman Tactical Super Safety - Getting it running
Pls follow and message me on Instagram for help! I can get yours running correctly
I would recommend these over forced reset triggers such as Alamo 15, rare breeds, etc!

[@TheTyler701]

Pls email me if you’d like info on sourcing :) [e-mail]

[@smokingcrab2290]

TheTyler701: Hoffman is gun Jesus Ian Mcollum: blasphemy!

[@c3bhm]

Hoffman is actually delivering us from bondage to the promised land, while Ian stays safe and non-political. The Bible says that during the end of days there will be many fake Jesii on the scene.

[@mattmarzula]

​@@c3bhmwouldn't that be Gun Moses?

[@rhodie33]

Ian is just a npc.

[@UnderCover_300blk]

What about AK guy?

[@clintmullins8670]

​@@UnderCover_300blk Him too. Especially Him. Isn't ironic he reps Commie Shit Listen, you guys need start calling out your fave YT'trs for putting us on blast their monetary gain, this guy is Not one of them Thanks for posting btw, sorry to hijack

[@SD-gt5kc]

ATF here we’re going to need those SIX super safeties that ran really well.

[@walkerwhite1798]

I asked hoffman directly and he told me its normal for the trigger pull to be slightly heavier in ss. But too much and there is issues going on

[@walkerwhite1798]

Great video though. It helped me realize i had a little filing to do. Appreciate the info!

[@carsbud4]

On mine, the first trigger pull on SS feels normal. If I let go of the trigger and cycle the bolt, it’s around 50% heavier trigger pull… Is that not normal? What’s the remedy?

[@goodwater2020]

Thanks Bud for safety. Eyes n fingers are irreplaceable. Good job on video.

[@TheTyler701]

PLEASE watch my updated video. This vid gives someone bad advice given the extra knowledge I have learned.

[@BeardOperator]

Any advise on troubleshooting it not resetting the trigger? Everything works smoothly but doesn’t reset the trigger after a shot?

[@Thor_b]

Awesome, video brother

[@nooobody]

I think it's awesome, too, video bro!

[@jeffhouk7040]

Im having issue with the cam pushing the trigger all the way forward to the cams limit and the disconnector isn’t letting the hammer reset onto the trigger sear, I’ve since removed some material from the disconnector and it seems to work ok, but its not ideal, the cam just needs to push the trigger more forward imo

[@larryhowell8550]

Your grip screw might be in to tight try lossening it some an see if it works

[@p3doslayer]

Hoffman is the Jimmy neutron of the guns world

[@jasonscott2782]

When you say the left side of the trigger needs to be filed, are you talking about the part that should be cut down or the side that should be Mil spec?

[@markinsacramentoshow]

Thanks for your video!,,my bolt is sticking in ss/safe mode would you make a video of where you grinded please

[@Mrsmith1082]

Its so ridiculous and hilarious that a kid has outsmarted the atf in terms of technical terminology in the definition of what defines a f/a and then trolls them with a clever name for it. But dont think for a second the atf doesnt have a big whiteboard rolled into a boardroom with 20 advisors, prosecutors and officials working around the clock to make this stick in theyre favor. 😂😂

[@TheTyler701]

Yeah I get that. Which is fine. But when that day comes I’ll obviously get rid of it as to not be a felon. Until then it’s fun technology to play with. Why people are so nervous is beyond me

[@Mrsmith1082]

@@TheTyler701 probably the auto key card aka the ervin effect, which ruined lives which as was know the story go's...bs!. Atf will twist it in any way they see fit to make you a felon regardless of the laws. Too be fair... I prefer legal stamp tax free suppressor/silencers buy off the shelf variety. Sbr's laws are bs too. Trying to get around the fa ordeal is more or less firepower for the atf as opposed to just simply fighting to get a suppressor or sbr off the shelf like in the Chech.

[@cha-ka8671]

Hate do be that guy but, he’s not a kid. I’m 47 and if I respect someone like Hoffman. I don’t call them a kid.

[@Mrsmith1082]

No ill will, I respect hoffman. Daddy chill! 😂

[@cd0130]

​@cha-ka8671 good point. He's going to live a long time. Most geniuses make big moves before age 30

[@Ian-ce2ol]

I’m having issues with my BCG sticking while cycling. When you say file the SS lever, do you mean file the under side of the lever so it sits lower on the rear takedown block area cleaning the path, or file the top of the SS lever to clear the path, or doesn’t it matter? I heard you say on one of your builds you even had to file you upper, which I’m hoping isn’t the case for myself. Any advice is appreciated. Thanks. Great video

[@hoonnatedawg6991]

Please explain more on the 9mm, I'm having issues with bcg hitting lever when trying to close rear takedown it holds it up about 1 cm. Do I have to file into the weight that's hitting it on bcg or try different bcg?

[@jimster1111]

question is would the milled twin bros trigger need a little sanding or is this advice primarily for custom triggers? i dont want to sand the milled trigger down too far.

[@timparkhurst8661]

The tolerances in every single gun are different and you need to calibrate the action to your particular combination. The detent pin is being sanded for a smooth interface with the cam. The milled trigger would be adjusted with sanding or filing to adjust the travel needed to allow the safety lever to move forward with the correct timing your bolt carrier requires.

[@StabbyMcStabwood]

A millspec trigger is like what, $6. I bought a bunch of spares when this came out.

[@turbovicsatx2910]

I think I have a bolt that don’t throw the lever forward it’s not going forward

[@swervebenz]

Can you make a video just installing the SS? Please!

[@TheTyler701]

It’s pretty easy. What questions do you habe

[@archstanton420]

@@TheTyler701 To a New owner of the Hoffman. Can you show where you filed each part that you have spoken about in this video. It is more of a spoken tutorial than a "HOW TO". Any help to you subscribers i9s greatly appreciated. Thank you!

[@3darms]

​@@archstanton420the readme from hoffman has diagrams that will show you

[@AllThingsLoud_]

@@archstanton420where did you get yours from?

[@3pointspartan]

What about 3d arms is that a good website

[@no-sway3709]

No

[@prodBrainShot]

Glad i ain got one of these rn 😂

[@TheTyler701]

This changes if you’re using your own trigger. If you cut your own trigger…you are opening up more cans of worms and it may be a different part of the trigger binding, therefore you’d actually ruin the trigger taking my advice and filing the top left. I would recommend getting a twin bros trigger and at least knowing how they cut it so you can make your own

[@johnerickson6023]

is there a reason why we cant just slightly file down the top of the bar instead of trigger to adjust it?

[@TheTyler701]

@@johnerickson6023 the cam will wear over time slightly no matter what. Best to minimize that by not removing cam material at all

[@johnerickson6023]

genius!!! @@TheTyler701

[@StabbyMcStabwood]

Hoffman, or someone released a little snap on printable jig for cutting your own trigger

[@AllThingsLoud_]

What about 3darmsco batch 3 kit?

[@thomass.4890]

Twinbros is a honeypot for the ATF now.

[@stirfry741]

What happened?

[@TheDangerZone86]

?

[@thomass.4890]

Can’t speak about it here.

[@stirfry741]

@@thomass.4890 yeah okay buddy 😂

[@queasyislander0274]

@@stirfry741do you honestly think it’s not? They will do with this just like they did with the frts 🤦

[@bryanhoell5886]

What factory AR's does the Super Safely work in? Do the triggers all require tuning?

[@SpottableCarp37]

You have to modify the trigger

[@thegentlemenrat3727]

Where are the non honeypot sites ?

[@user-hu8we3ii7k]

Just print one, then you don't have to worry about it

[@45Gunner556]

They are on eBay

[@user-hu8we3ii7k]

@@45Gunner556 You guys should start coming up with more creative screen names.

[@Michiganbreadboyz_bt8919]

Have you put one in an aero precision lower?

[@lawdawg02actual]

Just checking in to see if you’re in jail yet since the AFT raids have begun.

[@cha-ka8671]

That Twin Bro's raid is complete BS. Never have we ever seen an ATF raid that didn't show up in the news, local news, or someone actually showing the warrant they were supposedly served. They were busted for running a ponzi scheme

[@66.caprice]

Hey can you post a video of your psa 9mm ar with the ss. I’ve also got a psa ar 9 and want to put a super safety in it but people have been telling me it won’t work because of the buffer weight and bolt bounce

[@bryanhoell5886]

I'm curious how well it works with 9mm as well.

[@66.caprice]

@@bryanhoell5886 I saw a guy on Facebook post a video of his ar 9 with a 50 round drum and it ran flawless, he said he had to cut an angle on the weight that’s on the bcg

[@bryanhoell5886]

@66.caprice I'm eyeing up the H&R 635. If their bolt carrier is to full-auto spec, it should work without modifications...in theory. Direct blowback firearms can be dangerous if not timed right.

[@marcusborderlands6177]

The big issue with 9mm ars is indeed bolt bounce. If you slow o record your gun firing you should see if the bolt bounces when it closes. If it does get a dead blow buffer that's nice and heavy, should help a lot

[@KHROMATICxKHAOS]

H2 or H3 buffer would fix bolt bounce.

[@gamerm4876]

I’m happy I never purchased that safety 😂

[@bigal4828]

I’m so happy brother that you got yours. I’m still waiting on mine. I guess twin 3-D printing don’t really care them and Hoffman if people pay for the product and gets it I’ve been waiting for it for over two months now. Did anybody wait that long for their can you please let me know

[@prestonferguson3527]

I saw on Reddit that wait time is usually around two to three months. The email I got from Twinbros said that they’re on back order

[@bigal4828]

I think it’s pathetic that we have to wait 3 to 4 months to get a product that if you go on their website right now they’re already making the B6 system and I ordered the B5 system which supposed to be shipped out around Christmas of 23

[@prestonferguson3527]

@@bigal4828 I hear you, but at the same time they’re going about it the right way. Twinbros do it this way so that even if the alphabet boys do end up raiding them and finding the shipping addresses, they’re not traceable back to the costumers. Yes wait time sucks but I’d rather wait 2-3 months and not be on a list than get it in 5 days with a knock on my door

[@j.j.123]

​@@bigal4828I hear you, I'm waiting on batch 5 also, but at least we get a free gift lol

[@johnpope8933]

@@bigal4828 if im not mistaken the whole thing is run by 4 or 5 people and all things considered with these rising in popularity its best to find patience. personally i wouldnt expect it to come in until 4 months after purchase

[@honkhonk1555]

Probably a stupid question, Do you know if this will work with a Larue MBT trigger pack? I’m looking at getting the Larue mbt package from greymarketresearch to put in my Lee sporting lower for my mp5k.

[@TheTyler701]

@@honkhonk1555 hit or miss. You will just have to try it. It all depends on how long the reset is. The cam was designed to reset a milspec trigger. Shorter reset triggers may work but they’re case by case

[@honkhonk1555]

@@TheTyler701 I appreciate you. Take care.

[@Chris-oy4nk]

Where can I get a metal one?

[@jacketfullofmetal]

@@markinsacramentoshowthey are scammers

[@TexasPapa13]

@@markinsacramentoshow not anymore

[@jimmyofthesea1883]

Nice

[@edwardmajor1968]

I ordered one from these guys over a 2 months. I've not received it. Could not even find a phone number to even call these guys. Right now don't waste your money

[@TheTyler701]

Long line man. You’ll get your stuff

[@j.j.123]

Can always do a charge back if you can't get in contact with them.

[@dheasley2]

​@@TheTyler701what happened to their fb page?

[@zachstone8526]

Took me 2 months to get mine and I was in the first few batches, I have no clue what batch they are on now.

[@ARP_king5.56]

Ok i got to go follow gun jesus

[@CodyShaulis]

So when i pull the cam lever back when squeezing the trigger its not resetting my trigger. I have to let off trigger pressure which im hardly holding. 😊

[@ImFad3d1k]

Need to file off more trigger bar material

[@kelaiah_]

I really want to get one but am a little worried, do I have to worry about the atf showing up?

[@kcoop785]

Can you post a video or a picture of the AR-V lower that you modified?

[@TheTyler701]

Not the lower, the upper is what had to be milled. Please join the FRT Facebook group with 6.2k members. I put a PDF on there that goes over everything step by step

[@mushmouth]

Watch out for the ATF raid coming your way...

[@danieldepot4090]

There should be a no problem with the machine ones versus 3D printed?

[@mattmarzula]

Not for about half a magazine...

[@RaeuberFotzenRotz]

@@mattmarzula?

[@nathanc30]

What do you recommend to use for polishing on a Dremel?

[@tr7von]

Mothers

[@RebornRoyalty4L]

Shweeet

[@Extra_Average]

DO NOT FILE AWAY YOUR LEVER If you have a few degrees of play in the cam, that's intentional, ANY OTHER ISSUE needs to be resolved in other ways. Don't ruin your lever unless you've got spares

[@TheTyler701]

What r you talking about man? I’m only saying to file the lever need be to clear the BCG channel.

[@Extra_Average]

@@TheTyler701 I'm an idiot man I didn't finish the video because my morning suddenly got started and I thought I understood what you were saying. I might be misunderstanding, so with an milspec ar15 bcg your upper should close up and the cutout should sit just above the lever. If you are unable to close the upper because the lever is hitting the bcg, you might have a semi only bcg. I'll watch your video again in a moment, I've spent A LOT of time tinkering with the ss for my blowback AR-9, but I've never had issues in my traditional gas piston ar15

[@Extra_Average]

@@TheTyler701 Don't mind me I'm just a goof.

[@TheTyler701]

@@Extra_Averagethere’s more material on a full auto BCG. So saying if it won’t close you may have a semi auto BCG is incorrect. There isn’t a reality where an upper won’t close on a SS lower as long as you have the SS pushed forward enough. And if it still hits, it’s because your carrier is to a 9mm blowback gun and you have to remove material from the carrier. Not material where the trip is, material in front of it that’s only added for weight purposes

[@billrowan1957]

" gun jesus " i think not. Major contributor, pioneer, mad genius. But Ian reverse the label of jesus. Just saying 🤙

[@bkiller001]

I got a metal one , would this change anything?

[@TheTyler701]

These r metal too

[@markinsacramentoshow]

I have an aero precision lower and and i push my hammer backand my lever just swing back and forth and dosent do anything?any ideas?i bought the ss and triger combo

[@KHROMATICxKHAOS]

M16 style BCG?

[@markinsacramentoshow]

Generic bcg I got it figured out thanks

[@Neo36911]

Hey hows it working? I also have an aero lower. What upper are you using?

[@markinsacramentoshow]

@samsam7539 haven't shot it yet waiting on a h2 buffer

[@mattweger437]

Meh I couldn't even get the lever in the gun. It's hitting the bcg. I would have to Dremel my bcg lol oh well at least I have a nice trigger. Aero m5

[@6.7riley]

why would mine be light striking? maybe some bolt bounce

[@TheTyler701]

Light primer strike is either bolt bounce or hammer follow

[@CorruptedGamer2015]

Try a heavier buffer an H2-H3 is recommended, check your buffer spring length a carbine spring should measure between 10"-11"1/4' if it's shorter it's worn, you can also try a heavier weight hammer spring

[@tommylast1233]

Where’s a good place to get these that are made of metal

[@BroughtToYouByDDean]

👋🏻

[@tommylast1233]

@@BroughtToYouByDDean Got good way to contact?

[@CWtactical]

dont trust him hes a fed @@tommylast1233

[@JohnDoe-dv9yl]

Where can I find?

[@BroughtToYouByDDean]

👋🏻

[@JohnDoe-dv9yl]

@@BroughtToYouByDDean ??

[@Just-Steve]

Outwardly admitts to an ITAR violation... 6 times 😂

[@CWtactical]

twin bros is an American llc, they may have violated an itar rule, but he didnt, also its not even confirmed that its against itars rule.

[@humansvd3269]

ITAR is for export listed items only.

[@gene2200]

Wouldn't go near this with an 11ft foot pole, they'll be banging at your door. On top of that your spending .50+ a round so in few short moments you've spent $100+? I don't get it, sure its fun few times but...and then post it so three letters come a knocking!

[@christopheralvaradoapache5112]

Ok

[@jacketfullofmetal]

Twinbros is not responding to anyone wtf is going on?

[@jeffhouk7040]

Unknown, they haven’t updated their little comment on their homepage in two weeks which seems not normal as well

[@redbeard2527]

I ordered the B6 in December. Hoping it arrives in February. 😢

[@Bujasim15]

I'm still waiting on my b5 that I ordered 4th of December and no response from twin bros

[@EastImp]

Ordered a b5 december 10th and haven’t gotten it yet

[@TheTyler701]

Yall will get it. They’re just slammed.

[@Probablyoutdoorstv]

Do not pass go do not collect 200$!

[@nabcunion]

Yeah fuck all that shit.

[@tabasco690]

Why the Condescending tone

[@cd0130]

I caught it to.

[@LaBoofadora]

kzbin.infoF_NT7KcGdYo?si=ynxwi6DmWkrjNg_1

[@johnpierce1470]

learn how to film in landscape mode genius

[@CAPTIVEPULSEMAKER]

Super Safety infringes on Graves Flex Fire Technology patent claim. Super Safety is counterfeit. Go figure.

[@ashtonleezer2393]

So are they not shipping them anymore now?

[@marcusborderlands6177]

It does not infringe in any way. Go home bot.

[@Tigris_River_Sand_Fleas]

With the drop in triggers that are available now, why even bother with this? These 'firing modes' burn through way too much ammo way too fast for a standard 30 round magazines.

[@TheTyler701]

Because you still have regular semi auto? What would you be giving up?

[@Tigris_River_Sand_Fleas]

@@TheTyler701 What is the 3 main reasons for wanting this many RPM? I will wait and see if you can give the right answer before I tell you why full auto a complete waste for untrained civilian pukes.

[@kevinroberts781]

​@@Tigris_River_Sand_Fleas Because we can

[@Tigris_River_Sand_Fleas]

@@kevinroberts781 yes, waste that ammo boy. You don't know that purposes of full auto.

[@AllThingsLoud_]

@@Tigris_River_Sand_Fleasit isn’t full auto

[@SgtNateHigers-BPD]

You are 1000% going to get a knock on your door in the near future lol. How have you reacted since the twin bros raid?? Have you hid your dogs and peppered your angus for the inevitable no knock?

[@cha-ka8671]

That Twin Bro's raid is complete BS. Never have we ever seen an ATF raid that didn't show up in the news, local news, or someone actually showing the warrant they were supposedly served. They were busted for running a ponzi scheme

[@stargate7841]

Where and what should be done? I don’t see anything, except your face….To do something, need to see gun part , instead only YOY have been seen, dislike 👎

[@TheATFcanSuckmyDicc]

So trigger pull matters even in semi auto ?

[@TheTyler701]

Semi auto is normal milspec anyways. It’ll feel like your normal gun

[@TheATFcanSuckmyDicc]

@@TheTyler701 gotcha, thanks

[@omarmendez4003]

@@TheTyler7013DARMSCO, has the super safety I want to buy some , I don’t know how to set it up 100% perfect but I’ll try to , what should I get batch 2 or 3 or Premium Hoffman ss kit ???? Let me know , I’m thinking about getting 1 batch 2 & 1 Hoffman kit