GHK Enhanced Blowback Kit for GHK M4

[@acjfilms33]

Been waiting for this!! Can’t wait for more I’ve wanted a review that was relevant and this helps so much

[@terryfolev3412]

May I ask you to please test how many rounds you can go through with and without the enhanced blowback kit with one mag? I don't want to run CO2 and I was wondering how much will I sacrifice if I do this. Thank you!

[@acjfilms33]

Terry Folev the co2 works fine it actually is a more effective gas and will help with efficiency. It also will kick more too so have fun it might cost more but that all you really do in airsoft

[@Gamer_LW-404]

Does it has weight shift inside or its just a piece of metal?

[@panavcreative]

Hey is that the Radian handle? I have been searching for a better handle for my GHK Mod1 because i find the one it has very very flimsy.

[@TStricklyAwesome]

Vero Digital it is not a radian handle but it’s an angel custom handle. In my other video where I install a few mods I have included the link. It’s a good handle but you have to glue into place the pins that hold the arms/wings on. The pins popped out on me within minutes of install. So if you don’t glue them into place and head out to a game you’ll loose them very quick and be sol. So if you go with this charger handle just be sure to glue those pins. Otherwise I have a upgraded buffer and spring as well in the gun and the charging handle has done just fine through about 100+ pulls on it since I’ve glued the pins. The finish is holding up great as well

[@panavcreative]

@@TStricklyAwesome nice thanks man. What are your thoughts on the heavier guide and spring. Any extra stress on the internals that is worrying?

[@TStricklyAwesome]

Vero Digital I’ve done maybe low 200-300 shots with the new kit and co2 and haven’t noticed anything yet. I’ve taken it apart to look for wear and haven’t seen anything but I’ll keep a look out going into the future

[@renanfagundes9651]

Hi, did you have the chance of doing the DH mod on it? I did the DH mod on mine and I am barely able empty one mag on it before running out of gas. That using the enhanced blowback kit.

[@blackstar2356]

What exact model is this and what have you upgraded or added

[@Jokur182]

What iron sights are you using? Thx.

[@marcusl8927]

Does it make fps drop?

[@smoe5584]

What stock do you have ?

[@smoe5584]

what stock do you use?

[@pigroodv2994]

Hey i am willing to buy this kit from samoon but i wondering if its good for the gun (MK 18 GHK) after few months, would you still recommend this kit ? And is the bolt catch still working fine or it uses more because of the stronger force ?

[@derekmoy935]

This kit was designed for all GHK M4s, MK18, and MK16 (URGI). The stiffer spring and heavier buffer is going to give you a harder recoil impulse. Like any spring upgrade it will wear down the bolt carrier group, bolt lock, and anything else that it comes in contact with over time. The parts are inexpensive. However, like he mentioned, shipping may be a problem. To answer your question; yes, it will work but the draw back will be gas efficiency and the longevity of some parts in your replica.

[@pigroodv2994]

@@derekmoy935 thank you for your complete answer

[@derekmoy935]

No problem dude, if you have other questions I could try and answer them!

[@Paiangan]

Did you unscrewed the stock tube ? I wanna know if the thread lock is wa compatible or is just like marui mws?!

[@derekmoy935]

So I’ve asked this question to Reddit user who has a GHK M4 and he has a real buffer tube; he uses a mil-spec tube and a mil-spec Magpul CTR stock. From what I’ve heard from a friend who currently uses/ owns an MWS he mentioned that the MWS has real steel threads.

[@lazarus1415]

Have you had many double feed with this rifle, I own an lm4 and it’s always double feeding. I love the realism of gas and thinking about getting a ghk just want to know your thoughts.

[@TStricklyAwesome]

Manny Williams I’ve had a double feed once and I think it was from bad bbs or improper gas loading. With the upgraded buffer set and having it cycle faster I can spam the trigger in semi and have no double feed issues

[@lazarus1415]

T.Davison_ yea bro I just purchased the mk18 from samoon, they didn’t have the upgraded buffer set tho.

[@sinistersam370]

@@lazarus1415 Hey manny, funny enough, I had the double feeding issue with my brand new mk18 as well. The reason for this is actually due to a microfracture in the feedlip of the mag, in my case, it was always the last 2 rounds of the mag that would double feed on a single magazine.

[@mego82]

I want to ask i want a licensed m4 i dont have any rifle i have glock 17 its my brothers but i shoot it more than him so i want to ask i want a full metal colt licensed m4 and i dont know if gbbr is better than an AEG so if u know then please help me

[@derekmoy935]

This kit was designed for all GHK M4s, MK18, and MK16 (URGI). The stiffer spring and heavier buffer is going to give you a harder recoil impulse. Like any spring upgrade it will wear down the bolt carrier group, bolt lock, and anything else that it comes in contact with over time. The parts are inexpensive. However, like he mentioned, shipping may be a problem. To answer your question; yes, it will work but the draw back will be gas efficiency and the longevity of some parts in your replica.

[@theanthonyaguilar]

Are the upper and lower metal/aluminum or is it polymer/plastic?

[@terrykavanaugh8029]

all metal

[@JL-xe1qm]

Do you have the 10.5 or the 12 inch? What do you recommend for all around ?

[@TStricklyAwesome]

10.5, I'd just prefer the shortest length because on any field I play on its annoying switching grip back and forth, because theres a lot of cover to move to and from, from the rail to the magwell in tight spaces. On the 10.5 I'm not nearly doing it as much, and I'm usually keeping my grip on the front rail instead of switching.

[@relics2397]

@@TStricklyAwesome Are you sure that's the 10.5? Because the link you posted on your other vid says 12.5 and the barrel does look longer than 10.5 too.

[@chrisdnz7886]

@@relics2397 Its the 12,5" version.

[@txU7884]

When you testing the kit do you use green gas or co2

[@RichardSteelUK]

At 3:36 he says Green Gas.

[@charibrewing]

Can you send me a link to where you got your gun?

[@zeiku738]

Here is the link my dude www.evike.com/products/49592/

[@travisstansfield6585]

What's a double hunter mod?

[@chackendorn]

It's the process of modding the CO2 mags so they take liquid CO2 instead of the cartridges.

[@travisstansfield6585]

@@chackendorn thanky ou

[@yeh2319]

@@chackendornAnd is there a specific advantage in terms of recoil, gas efficiency or fps increase compared to the "normal" devilhunter mod?

[@liammiddleton3064]

Hey is there one that's stronger then this stronger that will give it more recoil?

[@TStricklyAwesome]

Liam Middleton as far as I know I don’t think there is. This is pretty much as far as you want to go in terms of spring strength and buffer weight. If the recoil was any harder than this I can only assume you’d start to run into problems. With co2 and upgrading the buffer/spring ghk is great but there’s limitations to everything and I’d think that getting a harder spring or heavier buffer would only cause issues, as well as huge drops in gas efficiency

[@liammiddleton3064]

Ya definitely think so now that u said that also do the dimensions of this gun meet the dimensions of the real M4A1?

[@liammiddleton3064]

Do u know anything on the GHK enhanced blow back pak GHK sells?

[@TStricklyAwesome]

Liam Middleton this is that very same pack, I ordered it from samoon aka GHK. I would say this is very spot on dimension wise. The only other gun I’ve heard of the competes with this as far as realism on a 1:1 spec goes it Tokyo Marui MWS. But I would say this is a 1:1, however if I’m wrong someone can chime in

[@liammiddleton3064]

Nice 👍🏻

[@BorelessAirsoft]

You could gave saved money just by compressing the original spring. In the Tippmann M4 HPA carbine, a compressed spring gives faster rate of fire and increased velocity.

[@MrTerror196]

Can anyone help, stuck between GHK mk18 or tippmann m4 v2? Open to running air and hoa which tippmann is amazing with but really care about quality of gun and upgradabilty

[@opairsoft8100]

Both can be upgraded, both aren’t super high quality

[@ademspicer7628]

What stock is that?

[@TStricklyAwesome]

GL-CORE stock, works with both milspec and commercial

[@ademspicer7628]

@@TStricklyAwesome thanks bro 👍

[@checkmate058]

Is there a reduced blowback kit? Light spring for increased gas efficiency at cost of recoil?

[@derekmoy935]

I’m not 100% sure about the lighter spring but there are kits on Redwolf Airsoft and Samoon that have aluminum bolt carriers and lighter buffers that should help increase cycling rates, gas efficiency, and the life span of your bolt lock since it isn’t holding back a lot of tension. I’d suggest using the stock spring and just replacing the BCG and the buffer!