GHK- How to Devil Hunter Mod PMAG/Stanag

[@TonersR6]

"You can see the co2 valve is much beefier" Ahh, I love it when videos get all technical 😂

[@checkmate058]

Foam blaster company's finally got on board with the mod community by adapting half darts and high springs. I cant wait for the airsoft manufacturer world to get on board with devilhunter mods

[@285Wolfpack]

notice i would recommend lubing the outlet valve before inserting it

[@acjfilms33]

Hey glad to see you again love the video I’ll be sure to do the same mod very helpful!

[@EmperorDevilhunter]

You need to take out the regulator for the liquid CO2 to go into the magazine (or open the regulator over 800psi). The 800psi value is the vapor pressure of CO2 at room temp (when there is a mix of gas and liquid in a container). The liquid is what gives you the ability to shot the whole mag.

[@TStricklyAwesome]

I've messed around and what I find is that if I mess with that regulator with my other mods I dont shoot at 350. I need it to consistently hit 350 and anything different with the c02 reg seems to mess with that. But I did play a straight 4-5 hour game last weekend and was able to get around 32 shots per mag, (that's just how many bbs I put in) and I was still able to get back load the mags again and get about half way through them.

[@NathanNewbury]

It's been about a year since your original upload. Any updates on how well your mags are holding up? Seals, valves, any catastrophic failures, performance, that sort of thing. Great video, BTW.

[@slick4415]

I think this guy forgot about his account which sucks because he seems cool. I just bet life got in the way, I hope he's doing well.

[@TacticalBlueberry27]

Will they still be able to run green gas ? Or do you need to switch back to the original valves ?

[@andrasferencsik3061]

Hi! You have to change back to gg valves.

[@lazarus1415]

So I could use this same method to just fix leaks

[@gyorgykun2698]

The video was good! Shows well how to do it!

[@estebanovich40]

Do you really need the kjw inlet valve for this to work? What's the difference between them?

[@TStricklyAwesome]

Yes and no. From the general consensus you can do this mod on the stock inlet valve, but it’s not a matter of if it fails it’s a matter of when. You wouldn’t want to mod all your mags, go to a field and play, to have it fail and you don’t have any valves with you at the time when it does fail

[@theoscott5266]

I the the OG ones work the best. I have messed around with the inlet valves a lot what worked for me was adding a drop of silicone oil to the inlet valve before filling. I think its because the co2 just drys the orings out while filling and the silicone is preventing it.. Over the coof lock down (around 60 days) I put a 3000 bottle of exels .2g through the same mag with 0 issues.

[@kroxithepanda3824]

i have the fist2 adapter von Tagin for my GL-39mm Launcher... could this also work? its basicly the adapter (for example co2 40mm nades, like a co2 charger) on the Paintball tank with HPA

[@henrykwieniawski7233]

What happens if you fill the magazine with C02 that has a PSI > 800? Will it blow out the valves?

[@gaybear98]

you can get refillable 12g bottles. I'm not sure if that has greater capacity than a gas mag

[@mattew_2795]

they dont

[@Daurijewels]

After doing this will you still be able to use green gas in this mag??

[@fredmercury1314]

Why would you switch to CO2?

[@rmtheg234]

Good for cold days due to higher pressure.

[@Icarus2032]

Not everyone lives in warm areas but still wanna use a gbbr. I just got my ghk in canada here and am about to do this mod. Getting the absolute most out of a gbbr is necessary when you live here.

[@keyboardcommando5146]

Great remedy for constipation!

[@johnfaustus1]

Protip - change the title of this video from PMAG (which is the RS Magpul name for their polymer AR magazine) to GMAG (GHK's PMAG clone) to help people find your video. Airsoft guys will probably search for GMAG instead of PMAG.

[@tonym3396]

What’s the difference between this and actual co2 mags??

[@PETRAS_]

Even with CO2 mags you need to mod them. Because the idea of this mod is to use any source of Co2, like paintball bottle, big bottles or whatever. Original C02 mags only accepts the mini bottle.

[@keyboardcommando5146]

@@PETRAS_ ah, now I see the big deal with doing this.

[@swib6993]

Do we use co2 or greengas mags to do tuis

[@sebastianbauer3989]

Are you not scared the the mag will exlode? The CO2 pressure is much higher than green gas.

[@keyboardcommando5146]

Only when it gets hot.

[@georgeinazuma]

Has anyone tried a similar modification to green gas pistol mag?

[@hansanders5280]

dont try they will explode

[@ExtremeJetBomber]

Why would somebody do this over just buying co2 mags?

[@PETRAS_]

Even with CO2 mags you need to mod them. Because the idea of this mod is to use any source of Co2, like paintball bottle, big bottles or whatever. Original C02 mags only accepts the mini bottle.

[@jasonlai980142]

the normal co2 mags is like 700gram, where the pmag(gmag) is ~440g

[@karloprepelic1820]

You should flex seal your valves for no leaks

[@scandimanairsoft]

flex seal?

[@keyboardcommando5146]

That’s it, that’s what all the “DH Mod” hype is about??? Teflon tapping threads!? Don’t get me wrong, I appreciate the video but aside from sealing leaks, why is this so loved, enough to get a silly name?

[@MKAnr1]

did you remember to watch the whole video? The valves are replaced with the co2 versions, Green gas valves can not keep up with co2. Teflon tapping is often not necessary at all

[@Shakshuka69]

The name is a reference to the forum user (his username was devilhunter) that came up with the mod years ago