Gigabyte H610m S2H: Installing Pentium G7400, RAM and M.2 NVME

[@JTCCWB]

ATTENTION: To fix the m2 SSD latch on this board, first pull the plastic latch upwards until it comes off, then place the m2 SSD and insert the latch downwards. ; )

[@josephevans8872]

Thanks, literally installing my m.2 and this was the solution, what seems to be the rotator piece in this vid is actually a male/female fastening

[@DannerBanks]

Thank you!

[@marceloponce9425]

here is a video that's show that. kzbin.info/www/bejne/hKqwg4RrlK1miZY

[@bulsekeef4798]

para fijar el pestillo m2 ssd en esta placa, primero tire del pestillo de plástico hacia arriba hasta que se salga, luego coloque el m2 ssd e inserte el pestillo hacia abajo

[@tobywan12]

Thank you. Trying to figure it for ages and then look it up on YT and found your comment. Why o why isnt it mentioned in the manual???

[@Ovrlordz]

Came here to figure out the m.2 mount. Stayed for the trouble shooting.

[@swifttech3602]

Tysm, I was rlly confused on the latch so this rlly helped

[@andreycoelho1921]

There is any video teaching to install and remove The M2 at this motherboard? I need. I have sabe problems at A520M H

[@Foudael]

5:18 bro u gootta pull that off XD

[@blueskyblackthunder]

dont install Nvme M2 this way. its totally opposite. place first on plastic lock then push it back keeping holder towards ssd. and then put it in.

[@andreycoelho1921]

I need a vídeo install of this M2. I have sabe problem at A520M H motherboard gigabyte

[@Dirk-van-den-Berg]

I tried out your video with my m2 card, which I deinstalled from the previous motherboard. But I can´t get it to work on the new motherboard. Got it latched in, getting it horizontal. Cannot see what I am missing.

[@SonPRO1102]

Will i have to remove the cpu cooler to install the ssd. The cpu cooler in question is thermalright AX 120

[@PC_HardwareTechUnboxing_1]

Hello, I don't have that model of CPU cooler, but I have some rather large Noctuas and other brands that have dual tower/dual fans on them. Usually, the only thing that gets in the way of removing M.2 SSD is a graphics card or other PCIE expansion card. Looking directly down, it may appear that the cpu tower/fans will get in the way, but you should have enough clearance to get the M.2 in there.

[@SonPRO1102]

@@PC_HardwareTechUnboxing_1 tks

[@bopitbull3957]

When using a used fan I always clean the thermal paste off of it and put new paste on you said that it's okay to use the pace that's already on there or was I confused.

[@PC_HardwareTechUnboxing_1]

I think if I said I was lazy I would re-use..joking. Definitely use fresh paste

[@bopitbull3957]

@@PC_HardwareTechUnboxing_1 ok thanks

[@Hiyorin871]

how many ssd you can install on this board?

[@ragnar4928]

Can i put 2 m.2 ??

[@chriszurita]

no

[@JatinLakhotiya]

hey I just bought i5 12600k and z690 gigabyte mb i already have a 1650 super will a 450w psu be enough? plus what fan is great for the cpu budget wise

[@PC_HardwareTechUnboxing_1]

Sorry...mixed up my responses. To answer your question. The recommended system power supply for a GTX 1650 Super is 400-450W. If you have barely anything hooked up to it...only one drive...no RGB...minimal case fans...you could get away with even less if you had say an I5-12400 in there. Your CPU has a greater TDP and will consume much more power...throw in an overclock on there, or open up Power Limits and the value gets greater. There are PSU calculators out there that might get you closer to an exact answer, but they won't take into account the settings that you can change in the BIOS or using Intel XTU. The efficiency of the PSU can come into play as well..but there is a science to that. A lot of people throw a buffer of 50-100W in there to be safe. If I still had my GTX 1650 Super I would have been able to tell you exactly what this uses at the wall during gaming and benchmarks (assuming I had similar PSU).

[@burebista2152]

Hi, is it possible to install 2 ssd on this motherboard?

[@Foudael]

SATA III (6 Gb/s) - 4x.; M.2 - 1x

[@Foudael]

so yes, 5 ssd xD

[@secrethydromicrogrow420]

bro i feel so dumb i installed my sons m.2 like this guy did in the video T.T its probably loose right now T.T

[@ftuttle]

..so incase anyones wondering how you actually install the hard drive, this is how kzbin.info/www/bejne/e4bHnoCNgqegl6M

[@Costinvlad]

ty

[@avalancherune2951]

Ty

[@Titos301]

thanks man

[@josearvizu2798]

THANK YOU I've been stuck with this for the longest time