Gktech Z33 350z Z34 370z Short Shifter - Install

[@One_LuvZ]

Running this shifter on my 350 and very happy with the purchase. My group of friends drove it and love the feel of it with one going to purchase one for his g35.

[@gktech]

Awesome, thank you for the great feedback!

[@xrbperformance4290]

This is the best video I have seen, awesome. Question: Have you guys figured out what causes the infamous rattle that comes from the shifter area on 370z?

[@AdamCarrionTV]

same problem here with the 350z

[@mondi4347]

i literally was looking for a video minutes before you guys posted this bc i ordered it!

[@pass_the_flask]

Put this on my Skyline V35 this weekend, unfortunately sounds like a tractor with all the rattling coming from the shifter area. It seems that SMF conversions might add too much vibration for this short shifter to work without rattling on acceleration. IThe rattle still happens without the shifter and weight installed, so it's not one of those. Torqued up all the bolts and greased any metal on metal areas (i.e. the adaptor plate), can't get rid of it. Bbeware if you're running an SMF conversion! I will probably need to sell this on at a loss

[@gktech]

Thanks for the feedback, will pass the information on to our team!

[@mathewzimmel]

Same here I put rubber gaskets between each surface of metal and it was better but still very aggressive with rattle

[@pass_the_flask]

Yeah so it's not just my particular car either. Amazing feeling shifter, but just too much noise to deal with on a daily. To be honest though, the thing that limits the speed of your shifts in these cars is the clutch delay valve. Maybe GKTech can come up with a delete kit for that horrible thing. @@mathewzimmel

[@S-Kidz]

Reduces the throw by 33 percent and for a z33 nice! 😏

[@StreetInfluenced]

No video for the strike fast shifter? the paper instructions are a bit unclear.

[@PhantomFrisk4]

Anyone have a rattle in the shifter after installing this kit? Can seem to get rid of it

[@gktech]

For customer service please email [e-mail] or use the website chat, thanks!

[@preston9817]

The voice over lol

[@benjyoliva2254]

Will this fit a 2008 g37s

[@davidmadden6453]

great ! now Luke fink can put on door even faster 😁🤣

[@johnayy]

yo where is my tracking number, still no update on my order!!

[@gktech]

Hi there, feel free to contact us VIA [e-mail] and we will assist further.

[@04SilverGhost]

Would that fit the g35?

[@gktech]

Yes sir, it sure does!

[@GeronimoLogistics]

@@gktech how about o5 g35 sedan?

[@gktech]

@@GeronimoLogistics Yep!

[@roykhau3675]

What do you do if you don’t have a press

[@gktech]

Using a vice and a rubber mallet, you should find a similar result. Just be cautious as the shock can cause damage.

[@FrankTheKoyFish]

does not have a Nissan, watches anyway