Great video. Followed it step by step and it worked perfectly. In my opinion you do need a vice to break the torque and once that is done it takes 3 minutes to install even for a novice gunsmith like me. Thank you for a great instructional video.
@BuddyLe383865 жыл бұрын
Thanks for the kind words...glad my video helped ya out. And yeah, savage had that torqued down pretty good.
@dougkidd4799 Жыл бұрын
Great video, I just did a couple of mine
@tgrif044 жыл бұрын
Thank you for that tip about the c clamp. Worked like a charm.
@KPutubing9 жыл бұрын
Thanks for sharing. On my 10fcp-k in 223 rem, the torque it took to remove the factory nut was significant enough to twist my Harbor Freight hex wrench like a piece of licorice, and dent my 24 inch EMT cheater bar. I had to lean my whole body into it to break that factory torque! But it worked. Thanks again. -Strafer
@BuddyLe383869 жыл бұрын
KPutubing No worries, glad I could help. The new bolt handle makes a world of difference from the stock handle. I didn't think it was big enough especially after putting the Bell and Carlson stock on it. After the stock install, there wasn't very much room to manipulate my hand around the handle.. Thanks for the view and for sharing.
@cs_yt7 жыл бұрын
You were not kidding about the torque on the hex. I had to put it in a vise and used a pipe on the hex key. Thanks!
@BuddyLe383867 жыл бұрын
cccssscccsss2 no worries glad I could help
@Philsgoodnow6 жыл бұрын
Just found your link to this video and I am really impressed. You did something correct that is secret hidden knowledge and yet you shared!!! The C-clamp agaist the bench and the Hex Key really ??? Yipee!!! I was about to get out the torch! Also I think it is greast that you are not a lefty...no offence to lefties, but thios becomes Rubiks' bolt when I have to watch it from that perspective.Thank you Buddy
@BuddyLe383866 жыл бұрын
Philsgoodnow no problem and glad I could help. Where did you find my video link at? Was it from a KZbin search or from another website? I like to ask because I've been finding out that lots of websites, mainly for my Honda videos, have my videos along with other people videos and when they click mine it goes to my channel...just like to know where viewers are finding my material. Thanks again.
@BackCountryWrenching9 жыл бұрын
that bolt handle is pretty cool upgrade to your gun
@BuddyLe383869 жыл бұрын
the added length helps a bunch. I caught myself smashing my knuckles against the scope with the old knob because it was so short and the added length and texture helps when wearing gloves.
@Mr_Boomstick_.30-064 жыл бұрын
Nice video. 2 suggestions, use a piece of wood when resetting the firing pin spring and use blue locktite on the bolt handle screw. You don't want to damage parts.
@BuddyLe383869 жыл бұрын
@alexdouglas14543 жыл бұрын
Do you have a phone number for them I have ordered one and they never sent it!
@BuddyLe383863 жыл бұрын
Evidently according to their web site they aint got one....their customer service pages states and this is copy and pasted from them "Please address all your customer service requests to info@gladesarmory.com We currently do not provide any live phone support. However, we will be able to address all your questions or concerns quickly and efficiently through email. We do this because our customer base expands through three continents, several time zones, different languages etc. Under such business conditions, phone support would not be very practical and would incur staffing costs we’d rather spend in other areas of the business. We find email the best way of reaching us: it is available when our customers need it, it leaves a detailed record of what the issue at hand is, and it is there when we get to it. Give it a try, it works!!"
@hwydog9056 жыл бұрын
Hi Glades armoury, I received my tactical bolt handle. I just opened the package this morning. It is not the one pictured on my order. The one I got has the oversized handle I believe the one I ordered had the black tactical handle. Please let me know how we can work this out. Thank you ------------------------------------------------------------------------------------------------------------- Glades Armory 9 May to me Hello B, Thank you for being our customer. I apologize about the incorrect part being sent. We will ship out at 1.75 knurled knob like the one in the photo. Please let me know if you have any other questions or concerns or if there is anything else we can help you with. Best Regards, Kevin ------------------------------------------------------------------------------------------------------------------ Glades Armory aka southernordnance. Kevin, you agreed to send a correct tactical knob as you shipped the wrong knob I am requesting a full refund because you have been avoiding all my emails and any contact apparently I am not the only customer you have done this with it’s all over the web forums your business practices are less than desirable word of mouth and forum go a long way I am sorry you are not interested in taking care of your business customers B.