Every step to Glassing, Hot Coating, Applying Resin Panels, and Polishing a 7'6" Surfboard
Пікірлер: 48
@marksist4152 жыл бұрын
Working outside of the box and made an ace board. That’s a soul craft bud🤘🏽
@danvargo90752 жыл бұрын
Awesome board, great build. It looked like you let the panel coat dry before pulling the tape on the blue, but then you wiped off the drips, but the panel lines came out clean and sharp?! Definitely looking forward to seeing more videos 🤙
@kevinjohnston61642 жыл бұрын
That's a beauty. I had a 7'6" Harbour and a 7'8" Stewart Hydrohull
@williamdiplexcito84132 жыл бұрын
Your a very talented young man, I am extremely impressed by your skills.
@CameronSardo2 жыл бұрын
i appreciate the kind words
@James-nj4pc2 жыл бұрын
Beautiful work! Subscribed.
@patrickgerken3872 жыл бұрын
Great job mate
@mattchenot2 жыл бұрын
Great video, thanks for sharing. Sick board too! 🤙🏼
@CameronSardo2 жыл бұрын
thanks!
@markuslange98832 жыл бұрын
good job man! suscribed🤙
@stephenbrown71672 жыл бұрын
Great work. Interesting that you prefer to use a drill with sanding pad attached over your sander polisher. None the less you've got the drill technique dialled. Well done
@CameronSardo2 жыл бұрын
thank you! yeah, i find i can be a little more precise with the 5” disc rather than the 9”
@itshayden29522 жыл бұрын
he is my cuz
@marvelbrytharabe9424 Жыл бұрын
what kind of resin are you using?
@6to6surf42 жыл бұрын
great video, how to do a resin pin line with sanded gloss finish?
@CameronSardo2 жыл бұрын
Thank you! more videos to come, I'll definitely show my pin line process in the future.
@6to6surf42 жыл бұрын
@@CameronSardo sorry i meant is it possible to do a rein panel with sanded gloss finish?
@CameronSardo2 жыл бұрын
@@6to6surf4 I put my panels on after sanding the first hot coat, so after putting on the second hot coat, it's up to you what kind of finish you'd like to sand it to. I haven't tried skipping the second hot coat though if that's what you're referring to.
@6to6surf42 жыл бұрын
@@CameronSardo Yeah thats what im referring to the skipping the second hot coat. Thanks for th reply. Please keep posting videos. Yeeww
@timdale40472 жыл бұрын
Great finish. No pinline cutlap as well. Awesome. 👍👍👍
@MrNvona2 жыл бұрын
How do you clean the brush after the hot coat? Or is it one brush per use?
@CameronSardo2 жыл бұрын
I actually show how i clean my brushes in the second to last video i uploaded but if you don’t feel like looking through it i pretty much just wash them in acetone
@HRuss1232 жыл бұрын
Any advice for adding a rice paper logo to a black surf board? I have tried glassing on the foam directly and have tried adding graphics between layers of fibreglass- both times the logo fades to black
@CameronSardo2 жыл бұрын
yeah i’ve found the same. i’ve seen friends get rice paper prints from this place called boardlams (in southern california) and the ink is fully opaque. not sure if you could get the same effect with an at home printer
@abahenol12 жыл бұрын
how much resin to use? and what kind of fiberglass to use?
@CameronSardo2 жыл бұрын
i use one layer of 6oz E fiberglass for the bottom and two layers for the top. around 50oz of laminating resin for either side for a board this size.
@unclejack123 Жыл бұрын
how do you figure board size/volume for a specific weight/height rider so you have a board that performs and paddles well?
@6to6surf42 жыл бұрын
how do i do a resin panel on the rails, both the deck and bottom? do i need to tape it on the apex of the rail similar to hoat coating?
@CameronSardo2 жыл бұрын
i actually haven’t it myself but that’s exactly how i’ve seen it done by friends
@6to6surf42 жыл бұрын
@@CameronSardo thanks
@soulesperanza2 жыл бұрын
Do you have replace the paint brush after every glassing job?
@CameronSardo2 жыл бұрын
No I'll usually clean them out with acetone and get at least a few uses out of each brush
@joeybenoit62692 жыл бұрын
Wow the crows outside was really digging this! At first I thought he was making a fake stringer? This dude must be microdosing!
@joeybenoit62692 жыл бұрын
Now what kind of deal can I get for this? 500 600 700? Let's Make a deal! Couple of ounces of Bud!
@joeybenoit62692 жыл бұрын
It really hurts when I listen to that tape being pulled off! You could use that s*** to play insurgents at Guantanamo!
@bradyreid1924 Жыл бұрын
Steady hand.
@Daniel-jz5yp2 жыл бұрын
Great job
@MrNvona2 жыл бұрын
Now I know why my new custom takes four months to get out of glassing.
@lo-km1qj2 жыл бұрын
hey man great job for the board and video ! i wanna shape soon and your videos are very inpirating. I like colors & design too I was just asking why dont u pre-drill the leash plug hole by hand , with a smaller drill bit before doing it with the machine. We can see that you're skidding a bit the center / middle point. Sorry for my bad english.
@CameronSardo2 жыл бұрын
glad to hear you enjoyed the videos! :) as for the leash plug, pre drilling with a smaller bit beforehand is a great idea. I’ve been learning and improving as i make these videos as well so my techniques are definitely not perfect.
@isy62212 жыл бұрын
Precioso!👏👏👏
@joeybenoit62692 жыл бұрын
Dude hope you're wearing ear plugs! Cuz you'll be having some crazy ass dreams after hearing this s***!
@kaezer007 Жыл бұрын
Great job of from agreat master it would be nice if you told us what material have you used tnx bro
@CameronSardo Жыл бұрын
i think i do a little better job explaining the materials in my newer videos but i’ll keep that in mind in the future. thanks for the comment :)
@kaezer007 Жыл бұрын
@@CameronSardo so nice bro tnx keep doing better videos for us