#16 Gorgeous Resin Geode Coasters Step By Step!

If you would like to purchase these demo coasters please email me at [e-mail]. My cost to make these was $20 plus shipping. If this still written they are available. You can find all my products on Poshmark as well under @michellecegledi
Link To Tour My Resin Room With Resin Poured Countertops: • #5 Full Tour Of My Res...
Link To Clean Resin Containers Super Quick: • #13 How To Clean Your ...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitznglitr
Eye Candy Rainbow Green Mica Powder Link: amzn.to/3yuEoT7
Deco Color Gold Paint Pen: amzn.to/3laEvQz
LA Colors Dollar Tree Eyeshadow Mica Powder Link: amzn.to/3mieO1n
99% Alcohol Link: amzn.to/3MyyTLd
Resin: amzn.to/3GDpDll
________________________________________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/collections/resi...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com/Resiners-Remov...
Resiners Resin Dryer for Cup Turner -- www.amazon.com/Resiners-Machi...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287

[@lorrainecaddy1433]

Absolutely beautiful, really love your work but oh that music is so irritating….❤

[@RaniNoviani]

sooooo beautiful😍😍😍

[@angeladiaz9843]

Omg, i love these. I’m new and overwhelmed. This is very beautiful and helpful!

[@glitznglitterbymichelle1]

Glad it was helpful!

[@emilylesher239]

These are really great! I really appreciate your easy to follow tutorial.

[@missionrestopia]

This is so straight forward with no unnecessary steps, makes the process seem really approachable. Thank you so much

[@glitznglitterbymichelle1]

My pleasure!!! Another one coming out in a few days with a different color!

[@kelleythomason8642]

Interesting concept of using eyeshadow!

[@miriamluskberry]

Beautiful!!!!

[@KarenYauney]

How wonderful ❤❤

[@marycasasnovas5710]

So pretty!!

[@cathievredenburg8019]

Oh! No! Not another craft! Totally love the technique! Stunning! Can't wait to see more. Thank you for sharing, Michelle.

[@deniseleavitt6483]

This was wonderful, and you are clear and concise in your instructions! Thank you 😊.

[@glitznglitterbymichelle1]

Thank you ☺️

[@katyjohnson3548]

These turned out so pretty! And they look good on the back as well. Bonus!❤

[@suewarnes9469]

So beautiful! ❤ The green and gold is perfect!🤗🥰

[@irenerhynes6732]

These are so beautiful. Thank you for this tutorial. Going to try make a platter as well.

[@glitznglitterbymichelle1]

Thank you!! I did a platter for a friend in black white and silver and it came out beautiful. That was before I made videos unfortunatley!

[@tiararozell4228]

Awesome ❤

[@scrapbooksiren1608]

This is the easiest tutorial I’ve seen on resin geodes. I’ve been using resin for countertops and tables and am just starting to make more artsy stuff like this. 🩵

[@erikavolltrauer8549]

Gorgeous coasters! ❤

[@sherryfaires7931]

These are so gorgeous! I want to make some now!!!

[@trowan3082]

Beautiful

[@deluke_arts]

This is my favorite look for coasters!

[@Cajunkaty]

Those are so pretty. I can’t wait to try. Thank you.

[@bexcraftdesigns]

Wow really pretty 😊

[@jennifermenth-pavel1260]

Those turned out gorgeous, they look like slices off the real thing. I love the colors you pick, very tasteful. Thank you for sharing and God bless. ❤️😊

[@glitznglitterbymichelle1]

You are so welcome

[@EllenfromSanDiego]

These turned out absolutely gorgeous! 😊

[@glitznglitterbymichelle1]

Thank you! 😊

[@siobhankirk9320]

Beautiful 💚

[@glitznglitterbymichelle1]

Thank you !!

[@jessicalarson3758]

Love them. Very pretty! :)

[@glitznglitterbymichelle1]

Thank you!!

[@MayraSablon]

Excelente trabajo 👏👏👏

[@karendarling7246]

This is one of the best videos I have seen doing this to explain how to do

[@glitznglitterbymichelle1]

Thank you so much! Thanks for wathing and please subscribe!!

[@katek.3339]

Wow! These are gorgeous! Great video! Thank you. 🌟

[@glitznglitterbymichelle1]

Thanks for watching! 😊

[@faridamiabhoy3185]

Very beautiful my favourite colour combination will try for sure 👏👌😘

[@dma8807]

Gorgeous! I’ve never seen anything like this before so I amazed. Also, I just subscribed. Thanks!

[@glitznglitterbymichelle1]

Thank you! I hope you enjoy the channel! Time to binge watch and catch up 😁

[@nichole_kvlf]

Gorgeous! I'm glad to have found your channel.

[@glitznglitterbymichelle1]

Thank you! I’m glad you found me too! New videos several times a week!!

[@SheriPhaffArtPaintBrushed]

These are really pretty. I like that green!

[@glitznglitterbymichelle1]

Thanks! 😊

[@ninahartnett3509]

Love this

[@glitznglitterbymichelle1]

Thanks 😊

[@trulybrandise9600]

Badass! I will starting my set!!

[@glitznglitterbymichelle1]

Thank you! I'd love to see yours!!

[@marlamakley-alden5299]

Best geo I’ve seen thank you!

[@glitznglitterbymichelle1]

Wow, thanks!😃

[@sarahgreen8409]

These r beautiful and of course I had to subscribe can’t wait to watch more

[@glitznglitterbymichelle1]

Thank you so much!!

[@joannedwy7100]

These are gorgeous! You never fail to amaze me. I can’t wait to get my molds and try my hand at making these!

[@glitznglitterbymichelle1]

Have fun! 😊

[@devangibuch2707]

Beautiful colour 👌

[@glitznglitterbymichelle1]

Thank you so much 😊

[@dolleyferguson1861]

Fabulous to say the least .Thank you so much for sharing 😘😍🥰

[@glitznglitterbymichelle1]

You are so welcome!

[@cheryllarnerd3779]

Hi! I just recently found your channel! So far I'm loving your stuff! I am especially jealous of your craft room!😂

[@glitznglitterbymichelle1]

Thank you so much!!! Thanks for watching! More to come!!

[@debraleblanc6122]

Pretty! I am going to try. (with your video to guide me)

[@glitznglitterbymichelle1]

Wonderful! 😃

[@rochim.1192]

Omg these came out so gorgeous! I'm tempted in making some for my girlfriends!!! Thank you so much for this tutorial!!!

[@glitznglitterbymichelle1]

Try it! Is so easy 😊

[@nurhanyldrm9024]

Ellerinize sağlık çok güzel olmuşlar.

[@yanxacreations]

Beautiful. Thanks so much for the tutorial and explaining how you divided the resin❤

[@glitznglitterbymichelle1]

Your very welcome! I wish more people did that it sure would help!

[@CaptMarkSVAlcina]

@@glitznglitterbymichelle1did you wait any time between the last layer, thanks for a great video.

[@glitznglitterbymichelle1]

The top coat? Yes once it was cured I put the clear on.

[@s.714]

😱 GORGEOUS ❣️ You've got yourself a new subscriber here ✌️

[@glitznglitterbymichelle1]

Thank you!!

[@amazingthings2463]

Wow 👌💞

[@BeccaL2016]

I just bought the same eye shadow from dollar tree last week before watching your video lol

[@user-si5my2bo5e]

Вы большая умница! У вас очень красивые работы. Спасибо, что делитесь с нами

[@glitznglitterbymichelle1]

Thank you ☺️

[@Alpha_DTF_Print]

🎅 @‌AlphaDTFPrint is making Santa designs come alive on glass jars with UV DTF Printing! 🖨 Have you explored this festive art? Share your prints and check out their latest post! #DTFInnovation #SantaPrints

[@fairyspunfibers9098]

So glad to have "discovered" you, Michelle...liked and subbed. 😊 VERY pretty colors and a great job of doming! I'll go to your other link - love resined counter tops! For a commenter below: @Anna Koehn Art Anna, the striations occur with mica in resin because of the tendency of resin to pull inwards to the center. Also, as the chemical exothermic reaction (curing) occurs, which creates even more pulling, the mica powders continue their journey to the center until the resin has stabilized and stopped moving inwards. Glitter on the outer edge will do the same (or anything else not nailed down). HTH?

[@glitznglitterbymichelle1]

Thank you!! Welcome to my channel, I hope you enjoy!!

[@gigidtx]

New Sub 💚 Love this color combination! I am making knobs for a cabinet in my office but have one question about the gold leaf. How long did you wait before adding the leaf? I saw 15 later on the next step but there was a cut before the leaf and want to make sure I do this exactly the way you did so the gold leaf doesn't spread out everywhere because my geode mold is much smaller. Thank you for all of your amazing tutorials 🥰

[@glitznglitterbymichelle1]

I only waited a few minutes to add the gold leaf. You can babysit it for 15 minutes after it’s placed to manipulate it to stay where you want it with a silicone tool or pop stick. Good luck!!

[@judeediehl]

Absolutely gorgeous! Great job! What could you use on the back instead of cork? I’m afraid it would ruin the look.

[@glitznglitterbymichelle1]

They have little clear rubber feet you can use too

[@ladybug2663]

I’m new to this so I’m all over the place watching different ppls channels. I’ve noticed a lot are UK so grams & mmls and the accents drive me nuts lol As soon as you said ounces I hit the thumbs up button and subscribed.

[@glitznglitterbymichelle1]

Hahaha thank you!! Yes not too many I watch are in the US! Thanks for watching 🥰

[@DonnaRichardson-hx5nj]

I watched your video and poured mine right along with you, but mine did not cooperate. There were zero striations. ☹ I hadn't done any resin work in quite a while and I forgot about the effect of room temp on resin. Even though I used a heat gun, I think my room temp may have been too cool. I ran my heater while pouring BUT I turned it off when I was done. I know better than to do that! Temp was probably 68-69 degrees. I am not giving up though. Gonna try again on my next day off 🙂

[@glitznglitterbymichelle1]

Interesting 🤨 my house never got that cold so I’m not sure if that’s it or not

[@teejaygirl818]

These are gorgeous! I appreciate your tutorial. Is there something I can read about the usage of these resin products? can they go in the dishwasher, etc. I am a beginner and just want to learn more about these products.

[@glitznglitterbymichelle1]

No they cannot go in the dishwasher 😔

[@valeryzakarzhevskaya5202]

Is it a low viscosity resin ? Amazing result 😍😍😍

[@glitznglitterbymichelle1]

No it’s a 1:1 ratio used for casting

[@susanlarberg]

Beautiful work! I just purchased materials. I subscribed to your channel. How do glasses or cups stay without slipping off and do hot drinks hurt the coasters? Thank u

[@glitznglitterbymichelle1]

They shouldn’t slip off 🤔 we’ve never had that issue. The resin will take the temperature from hot cups as well with no problem 👍

[@dalialovesdoggies4361]

Howwww gorgeoys. The music is NOR as gorgeouzzz😂🤣😅

[@glitznglitterbymichelle1]

Thank you! and the music is just stock music, can't use anything good with copywrights...

[@dalialovesdoggies4361]

@@glitznglitterbymichelle1 I believe you

[@VinuthaKmanjunath-qw2no]

Hi first u took green pigment added to the resin then did u wait for few minutes before pouring?

[@glitznglitterbymichelle1]

No I don’t wait at all

[@sita.hatmosroyo468]

Thank you for the tutorial. They came out very pretty. Why do you spray alcohol on the top of the resin at the beginning of the process? What is it for?

[@glitznglitterbymichelle1]

It pops bubbles so I don’t have to torch on my molds and risk ruining them. Make sure to use 99% alcohol though so it doesn’t leave a residue.

[@sita.hatmosroyo468]

@@glitznglitterbymichelle1 thank you so much 😊

[@BeccaL2016]

Hello, I love your videos, I just started this hobby, so I made many mistake when making coasters, like I took them out too early they are bended or have bubbles, now they are harden and deformed, how can I re-use them or I just threw them away?

[@glitznglitterbymichelle1]

Heat them with a heat gun and lay something flat and heavy on top for a day or two and they will flatten out again. If you don’t like them change the tops with a topcoat.

[@666shazbot]

Hi. Can you tell me what you spray on half way through please? I absolutely love these. X

[@glitznglitterbymichelle1]

I spray 99% alcohol to pop bubbles 😊

[@666shazbot]

@@glitznglitterbymichelle1 Ah thank you. I am going to try this tonight.

[@dolidinel7938]

How long did you wait before adding the final clear resin. Beautiful coasters

[@glitznglitterbymichelle1]

Till the first layer is cured

[@amderymejia3317]

Hi, the pen you used to color the border is a permanent color? Or how you seal that color? I am wondering is not going to fade out with the time 🤔 Also, thank you for the tutorial. I love it.

[@glitznglitterbymichelle1]

It will rub off if it’s handled a lot there’s really no way to seal that in but can be re applied.

[@nancycross2228]

Liked and Subscribed ! Question..what is the purpose of the Alcohol spray ?? Thx.

[@glitznglitterbymichelle1]

To pop the bubbles without torching and taking the chance of ruining your molds.

[@nancycross2228]

@@glitznglitterbymichelle1 thank you !

[@CaptMarkSVAlcina]

This is so wonderful, just two question, Did you say you used liquid dye or Power to dye ? And how long before you put on the last layer of clear resin ?

[@glitznglitterbymichelle1]

I use mica powder for all my geode coasters. And once it’s cured I add the top coat of clear.

[@CaptMarkSVAlcina]

@@glitznglitterbymichelle1 thanks so much for your information. Do you need to sanding between the top cost so it can fix it self to the dry renin as I see this done on big river tables?

[@glitznglitterbymichelle1]

Nope I just pour

[@CaptMarkSVAlcina]

@@glitznglitterbymichelle1 thanks very much for letting me know

[@melaniereisner8375]

Is the side facing the mould less shiny?

[@glitznglitterbymichelle1]

No not as long as your mold is shiny.

[@farrahbahnfleth116]

What kind of epoxy are you using? I tried to use the link you posted but it took me to the isopropyl alcohol.

[@glitznglitterbymichelle1]

Thanks for letting me know I will fix that! Here is the link: amzn.to/3GDpDll

[@tonyasmith5409]

Would you provide a link for the foil that you used in the center please?

[@glitznglitterbymichelle1]

amzn.to/3Sjgh4G

[@kirtishaw5977]

6:44 clear resin mean.... Only resin. Or mix with hardener ...dear ..

[@glitznglitterbymichelle1]

Yes both, it won’t cure unless you mix them together. I just don’t add color to keep it clear.

[@chinnjk]

Was wondering if a hair blow dryer works?

[@glitznglitterbymichelle1]

Yes on high heat 👍

[@melissawells6922]

What resin did you use for this project?

[@glitznglitterbymichelle1]

It would be linked in the description box, off hand I don't remember it was a while ago.

[@nadaeid-ie6bs]

Both green and gold are mica powder?

[@glitznglitterbymichelle1]

Yes I have good luck when I only use micas

[@FarhanaEbrahim-mt5ff]

any idea how much resin was used in ml?

[@glitznglitterbymichelle1]

Probably approximately 120ml each

[@brendamorris5036]

Eye candy is that mica powder

[@glitznglitterbymichelle1]

The tan was eye shadow from the dollar tree, basically mica powder re packaged!

[@zainabhatim7986]

I tried making this for the very first time but both of my colors got mixed what can be the reason?

[@glitznglitterbymichelle1]

I’d have to see a picture, if you’re on my Facebook group you can share it there and tag me in it so I don’t miss it.

[@zainabhatim7986]

@@glitznglitterbymichelle1 your Facebook group name or any link?

[@AnnaKoehnArt]

Michelle! Liked and subscribed! Your work is beautiful and your video is great! I think you will reach 1000 quickly! I'm working on the goal, too, and getting close, but it's taken a while! Your coasters are so awesome, I see that I can learn alot from you in my resin work. How did you get the topcoat to dome? Was the first layer almost all the way to the top of the molds? Also, how did those beautiful lines appear as the coasters cured? Lastly, I thought you used a torch to pop the bubbles...what?! Anytime I do that with silicon molds my resin binds to the mold and the mold rips when I take out the cured coaster. Teach me your tricks! I can't wait to see more of your videos and learn from you. Here is a recent board/coaster set I made: kzbin.info/www/bejne/i6bZp5elbNKLpNk

[@glitznglitterbymichelle1]

I filled the mold up almost to the top with the color then I poured clear just enough to see it over the edge but stop before it overflows. If you get it good you won't have to sand or trim! I think the lines appear because of the mica powder and the clear reacting together but I'm not completely sure. You can use a torch but I do lightly when using a mold, I like the mister of alcohol the best because it pops the bubbles and doesn't leave a film. Thanks for subscribing!!!

[@AnnaKoehnArt]

@@glitznglitterbymichelle1 That is such good advice. I have used the alcohol on boards and trays but never on coasters...now I will be doing so! Thanks for the tips on the dome effect. I will have to experiment with this, I bet it takes practice to get it right. Happy creating, Michelle!

[@fairyspunfibers9098]

@Anna Koehn Art Caution: NEVER use alcohol on the dome. It breaks the surface tension and resin will run over the sides. 😊👍

[@AnnaKoehnArt]

@@fairyspunfibers9098 Thank you for the advice! That's so good to know.

[@3040babycakes]

The music is too loud!

[@glitznglitterbymichelle1]

Yes this was one of my very first videos I edited. My more recent ones have been changed. I hope you give them another try. Thanks for watching!

[@chinnjk]

What does the alcohol do? Also, what is the point of waiting to put in the gold flakes? Love how your work turned out! I plan on making some very soon

[@glitznglitterbymichelle1]

99% alcohol spritzed on will pop bubbles instead of taking a chance with a torch. Waiting will help stop the movement of the foil. Wait till the resin has almost stopped naturally pulling towards the center. 😊