GLOCK 26 shooting review

[@billm4262]

I was Military Police in the Army so I have extensive training with firearms long rifles and pistols. I recently obtained my conceal and carry for my state. My first everyday carry weapon was an M&P shield 9mm. After taking this gun to the range 2 or 3 times I no longer felt I could trust this weapon with my life on the line. More malfunctions than I could count and very inaccurate. While that gun was sent in to be repaired, I purchased a Glock 26 4th gen. Let me tell you I don't think I will ever go back to the M&P Shield as my everyday carry. I purchased the Glock 26 immediately took it to the range without even cleaning it, it has never failed on me, And the accuracy is noticeably better. That being said I do think there were some defective issues with the staring on the barrel of the M&P Shield, and the ammo I use at the range is not the highest quality. I've been nothing but impressed with my Glock 26 4th gen and would recommend this gun to anyone for an everyday carry. It has been 100% flawless for me in its performance.

[@princeofpickles9765]

Good man💪

[@matmon4953]

is it printed under summer clothes?i plan to replace g19 with g26.g19 is too big and i can't hide it.

[@billm4262]

@@matmon4953 It's a little thicker but not bad at all for printing imo. Honestly though I really don't care much anymore about printing.

[@thechinadesk]

Good down to earth review. Direct and to the point. No time wasting irrelevancies. Other reviewers should emulate you.

[@GunsGearOnTargetTrainingLLC]

Thanks for watching. This question is largely a matter of personal "choice" and it's subjective. Whatever gun you can shoot well and get good hits with is a good place to start. Both Glocks and MPs have been reliable and durable (Shot 18,000 rnds in my MP pro) and 25,000 through my Gen 2 Glock 19. Both are solid performers. Check out my other vids on MPs and Glocks that might help...

[@GunsGearOnTargetTrainingLLC]

Thanks for watching. This is a common question from people wondering which one is best. The answer is it really Is dependent on the mission. The G 19 is in my opinion the best compromise for size comfort and use. The 26 is a smaller gun bit better for concealed carry. However if you're trying to develop skills on a firearm the larger gun the easier it is to master the skills. If you mastered the fundamentals of shooting then a small handgun as advantages for carry...

[@GunsGearOnTargetTrainingLLC]

No. The issue is my primers are not fully seated therefore they protrude slightly from the base and therefore the primer does not ignite. Never had one issue with any Glock shooting factory ammo... the malfunctions that I get are my reloads. And they're always the same problem I simply have not seated the primer... The three to half pound connector makes no difference whatsoever From a Reliability standpoint. Thanks for watching. Hope you will share the videos with others.

[@GunsGearOnTargetTrainingLLC]

Thanks for watching and commenting. The G23 is excellent and great EDC carry. In my experience (and for my small hands) the G26 is a bit easier to get fast/ accurate hits on target. Also the ammo is less expensive than the .40 so you get more practice! Bottom line both will do the job when you need it!

[@MegaChubbyboy]

I carry my G26 with a G19 15 round mag and an X-grip insert. Love it.

[@evoben24]

best way to do it

[@GunsGearOnTargetTrainingLLC]

Thanks for watching this video and commenting. Please share the channel with your friends. Thanks!

[@GunsGearOnTargetTrainingLLC]

Thanks for watching!

[@GunsGearOnTargetTrainingLLC]

Thanks for watching. Hope you'll subscribe!

[@GunsGearOnTargetTrainingLLC]

Actually the type one malfunction was related to my reloads. Often since I did load volume I failed to fully seat primer this causes this type of malfunction. Never had any issues whatsoever with factory now and it fired thousands of rounds through the gun. 3 1/2 lb connector does not affect the actual striking of the primer that would be the Striker Spring. I have not changed the striker spring. Thanks for watching

[@GunsGearOnTargetTrainingLLC]

Thanks for watching and commenting. I hope you'll consider subscribing and checking out the other videos on the channel.

[@GunsGearOnTargetTrainingLLC]

Appreciate you watching and your comments. The G23s are sweet.

[@PlugNuster]

I actually enjoyed watching this video. I carry a G26 Gen3 as my EDC, with the 10 round flush magazine. In my pocket rides a G19 mag with the X-Grip sleeve. That thing makes the G19 mag fit so well in the 26 that it's just crazy, love the X-Grips.

[@GunsGearOnTargetTrainingLLC]

Fair question. the G19 is really the best "small" full sized Glock in my opinion. however, sometimes the G26 is just a better (smaller) carry option. Plus I like the whole Glock 9mm family. I can shoot the G26 with the flush fitting mags fine. But prefer the slightly longer +2 mag extension (so you have 12+1 capacity.

[@MrBulletpoints]

Really enjoyed your presentation. I already made up my mind to buy a 26, just looking for confirmation. Wish I had the space for a home range like yours. Nice job.

[@brittanyfiani7431]

I absolutely love my G26 - looking forward to the new G42 though for better conceal carry.

[@yukno374]

how much does the g26 kick/recoil than the g19? i have carpel tunnel so its a big deal. i cant wait for my g42

[@yukno374]

i asked about the g26 and 19 because i want a 9mm but a soft shooting accurate one im just thinking g26 has much more recoil for home i keep g30sf but feel way more comfortable using a 380 because of the accuracy i get, like i said the carpel tunnel makes the 380 round the best for me

[@ShoeManReview]

Glock 42 is amazing for my hands. It becomes part of you when you grip it. Most comfortable gun i have ever held!

[@accord50]

Great video as usual ! My EDC is a Glock 26 Gen3.I carry my G26 with a Glock 19 magazine with a X-grip insert. Even with all of the new micro 9mm out here such as the Shield plus, Sig 365 and the Springfield Hellcat, the 26 still works for me !

[@GunsGearOnTargetTrainingLLC]

Good choice

[@buddyringo21]

I have the Glock 26 gen5 and I absolutely love this gun!! I Installed Ameriglo Spartan night sights and +2 mag extensions on the 3 magazines , 12+1 of 9mm that conceals well and shoots 3” groups at 25 yards 🤩🇺🇸

[@GunsGearOnTargetTrainingLLC]

Nice additions to your G5 G26.

[@MarekBrzezowski]

Nice review. No bullshit talk just facts and action from the casual shooter perspective, just like me. I bought Glock 26 yesterday and I hope I'll enjoy it like you. Stay safe

[@Raeind]

I like your reviews direct and well explained.

[@j.yumuraj2880]

The grip extension is still more concealable than the 19 while allowing (for most people) a three-fingered grip. Same idea as a bobtail on a 1911.

[@GunsGearOnTargetTrainingLLC]

Thank you sir! I hope you'll share the channel with others.

[@TheBoxingCannabyte]

Combat vet here, actually have had to use the G26 in a few situations. As much as I love my Beretta M9 (and boy do I love it, even when I had the chance to upgrade to something else I didn't, I'd done a lot of work to mine), I own quite a few handguns ranging from Glock 19 to Kimber TLE 2 (way overrated imo, anything with a 200 round break-in is not something i'd ever recommend to anyone except competition shooters who dump $1-5k in their guns anyway), Springfield XDm, Smith and Wesson M&Pc (Which was my primary carry over my Glock 19 for awhile), the Canick TP-9 sf is my newest that I love, along with another Gen 3 Glock 26, as of right now it's my primary carry gun. I see no reason to carry the heftier guns when the chances of engaging someone past 45 feet on my current job is so low that you'd just be overly paranoid and distracted to even focus on that. (I guard money-trucks, won't say for who or what but it's a good job esp for a one-eyed handicripple veteran like myself. All I had to prove was combat proficiency and they really wanted me to help manage security so, I went all Nick Fury on 'em :P) Good shootin', btw. Us handicripples are quite handy!

[@TheBZKProject]

Joe Cannabyte buddy you smell like bullshit all the way through the computer

[@OGCJ10]

Alex Boswell. .😂😂😂

[@glocksNgrippers]

Thank you for your service. God Bless.

[@GunsGearOnTargetTrainingLLC]

Thanks... I get pleanty of practice because I reload ammo as well.

[@GunsGearOnTargetTrainingLLC]

I don’t feel one is “better” than the other. I own both and have great appreciation for Glock and M&P pistols. I’ve shot and carried Glocks as an EDC for twenty years. I like and am impressed with the M&P line in that it fits my hand better. If comparing the M&P full size then you need to compare it to the G17. Glocks are not as good a fit in my hands but I would definitely choose a G17 or G19 if heading off to combat. Checkout the other vids on my channel on Glocks & MPs some of G26 v MP9c

[@CartersChambers]

If you’re carrying edc for personal protection ANY instance you use it you WILL BE IN COMBAT

[@johnnyrailroad6921]

I just added the G26 to my collection. I took it to the range for the first time yesterday to break it in. I will say, the pistol does shoot well, recoil is minimal in my hands and it is as accurate as any other. The trigger, for me is okay as well. The thing is, out of all my sub-compacts, the Glock is the only one I got slide bite from.

[@NCtrailX]

Great shooting! I've shot qualifiers on 8" targets at 25 yrds and I can't get hits that well! Love my G26. Have a Shield that I carry, as well. Like the Shield, but can't shoot it as well as the good ol G26! Great size and feel combined with big gun accuracy is hard to beat.

[@FOVIESG]

Es una lástima que no entienda el inglés, porque sus canal es uno de los que más me gustan. Así que, muchas gracias por sus vídeos. Un cordial saludo. Fernando (Asturias, Norte de España) --------------------------------------------------------- It is a pity I do not understand English, because its channel is one of the ones I like. So, thank you very much for your videos. Best regards. Fernando (Asturias, northern Spain)

[@GunsGearOnTargetTrainingLLC]

+FOVIESG Thanks for watching and commenting.

[@GunsGearOnTargetTrainingLLC]

Me too... they rock

[@brentfoto]

In fact, it's more likely the ammo with mine as I use the factory trigger and rebound springs. When I had a model 49 an acquaintance at my prior gun club cut a couple of coils off the latter, and it smoothed out and lightened the pull, but it would not always go off on very slow pulls.

[@rdean45acp]

I carry a 26 4th gen everyday it's the most accurate of all the glocks I've owned or shot. excellent gun.

[@jtctdmb]

So EDC to protect myself and my family you would lean toward the glock line?

[@GunsGearOnTargetTrainingLLC]

Thanks dude!

[@andrewg9987]

Thank you for you video. You have helped me make up my mind. I'll be buying one for my daughter.

[@bfx20018f]

Great shooting. Thanks for the video and you comments.

[@EverGreenNyce]

First time I ever seen a flock jam🤦🏽‍♂️‼️

[@nathanielmunoz9130]

Well yeah he said it's not the best ammo

[@joesmith201212]

I can't stand the winchester ball ammo, thats the cheapo walmart crap

[@marcusg7752]

JUST GREAT REVIEW. straight to the point! no pad out a bit!! ! congrats! just got my G30..and im in love with that..its a kind of bulky to carry..and im wondering to get G26...you helped to make up my mind! STAY SAFE BUD!

[@Highlander0766]

Buy a Model 19 GLOCK if you want a longer grip. The short grip is designed for better concealment. Once you add the extended magazine, you negate the benefit of the size differential. It's up to you though.

[@rogermcgee1]

Love the G26!!

[@frankharrah7449]

Hi GGTT, I enjoyed your video. It looks as if you're enjoying making it and that you're a pretty good shot as well. Keep up the good job and having fun doing it. I've got 4 Glocks (one of them is a Gen 3 26 also). Having the ability to use the different capacity magazines is a nice feature. I agree with you that they're easy to shoot accurately.Thanks

[@GunsGearOnTargetTrainingLLC]

+Frank Harrah Thanks for watching and commenting.

[@1122Maikel]

Great review man!

[@mick6701]

Great shooting Brotha i carry a G23 for my EDC but i am going to upgrade to the G26..

[@GunsGearOnTargetTrainingLLC]

Ouch... that stinks. I have three M&Ps and have shot many others in different calibers and never had that happen. I'd semand that S&W provide a fix faster and or retrun it. Most Gun stores want your business and will try to take care of their customers. You do need a G19 or G17. Often you can pick these up used for $400 or less. definately want to have one or both in your collection. let me know how it goes...

[@Deedub100]

Good stuff, makes the G 26 sound like a blast.

[@jtctdmb]

So I went with the full size M&P. Shot 100 rounds pretty good, but every ejection was discharged right back at my head. S&W said it is a problem with some of the pistols. 4 weeks for it to be fixed. Wish I went glock.

[@pzlehr777]

This vid got me to get out my G27 with the LW conversion barrel. I tried your 1",2" and 3x5 targets. Out of 10 shots I got 5 in the 2"...didn't try the other 2. I think I need more practice!

[@rogermcgee1]

Love the Glock 26

[@exionem]

Right on, thanks for your valuable information. It just seems like the G26 is more easier to conceal as long as a grip extension is not used.

[@vanessal7291]

It easily concealed with the factory 12 round magazine. 12 rounds in the 26 is perfect.

[@Aggy_0351]

I like G19 mags in it if no grip extensions on mag.

[@BlindBatG34]

G26 + 10y / 1" target = :-D NICE JOB!

[@petechilds788]

Great review, very helpful. Thank you.

[@GunsGearOnTargetTrainingLLC]

Pete Childs Thanks for commenting and watching

[@ShoeManReview]

I think your Glock 26 is a gen 2 or 2.5 because of the flat extractor and the lack of checkering in the finger grooves. Very awesome 26 i love the finger grooves without the checkering. Maybe because it is not seen much these days. Love your channel and videos make more!!

[@GunsGearOnTargetTrainingLLC]

Thanks for the kind words!

[@danman3682]

I carry a glock 26 and some of my mags have the pearce +2 extensions. I have had no reliability issues with them but heard some have. do the extensions cause the g26 spring to malfunction by stretching it too far? wondering if i just been lucky nothing bad has happened. thanks

[@ramonvelez3819]

Hi ...Great video....where did you get the pinky extension magazine...what brand?..Thank you!

[@CWB-ep8yz]

I own a M&P Shield, but my next purchase will be the 26.

[@GunsGearOnTargetTrainingLLC]

The G26 is a wonderful gun. I carried it for years.

[@mrapple3702]

Both are great pistols and work well for concealed carry. The Shield just disappears under your clothes a little easier.

[@zaldumbide13]

would you say in your honest opinion that this arm is better than the xd sub compact in 9mm. I have seen both your reviews of these platforms, thank you in advanced. I value your opinion

[@jackwongen6671]

I use mine for CCW. Good back-up weapon. Good Video, keep up the postings. I bid you Peace.

[@crf450rbulletdavid9]

The one malfunction I've had in my glocks came from a funky looking round from Winchesters white box. The neck of the case was super bulged and scrunched up. My slide just wouldn't close.

[@jamesbell372]

crf450r bullet david and yet you tried to chamber a defective bullet. wow😐

[@fallerantino44]

Always enjoy your videos..... Excellent overall information... from "down to earth guy" thx.......

[@GunsGearOnTargetTrainingLLC]

The Glock OR the M&P would serve you well. You should try them first and get some training with a good instructor. It's always easier to shoot a full size gun than a compact version. The question you have to ask is "how will I use the gun... will i carry it or will it be in a safe?" Good instruction is very important as is "trying" the side arm. I have several vids on Glocks and MPs on the channel. Check them out...

[@MrGillespieable]

I like this guy . Good vids sir, and good taste in weapons. CA support

[@N98858]

Howdy, Stumbled across this although I am a fan and subscriber! I noticed that the front strap/finger grove is "Smooth", I have one like that too that someone told me that it was actually a Glock 2.5 Series! (although Glock Denies there existence) Thanks ';-)

[@brentfoto]

Understood. Thanks for the video!

[@cowabungakarlsparty]

+Guns, Gears & On Target Training, LLC If using G26 for home defense, would loading the weapon with 115 grain Hornady Critical Defense FTX HP or American Gunner XTP JHP be adequate or would these lite weight rounds sacrifice too much weight and stopping power in exchange for lighten recoil? How about a 100 grain lite load? Thanks for a great video... Enjoyed your show and another show on testing guns and various ammos.

[@GunsGearOnTargetTrainingLLC]

+Milton Yee I like using what large Law enforcement organizations are using. These include rounds like the Speed Gold Dot 124 grn or 124 grn +P or the Winchester Ranger T 127 +p+. As far as home protection, I personally perfer egressing the building if possible or establishing strong hold position in a room, dialing 911 and waiting for the police to arrive. The rounds you mention are also good options. I just prefer heavier bullets in the 124 grain - 130 grain range.

[@raymondpbarco]

i love the G26!

[@MrTan1964]

Good video. Great shooting.

[@jtctdmb]

Wishse...Do you recommend the Glock 26 or the M&P9C? Then what is your thoughts on the 19vs the M&P full size

[@lisocampos8080]

That hangup happened probably because you changed to a lighter connector. Its designed to be able to hit the harder military grade primers.

[@GunsGearOnTargetTrainingLLC]

Actually it was one of my reloads with the primer not fully seated. I've shot tens of thousands of factory rounds through Glocks with a 3.5 connectors and had no issues.

[@trumpeteer211]

the lighter connector will do nothing in terms of light strikes. When people change the firing pin assembly springs or whatever you call them, is when they have this problem

[@johnathanas1795]

Guns, Gear & On Target Training, LLC w

[@brentfoto]

Maybe the light strikes/failure to ignite are related to the 3.5 lb pull?

[@exionem]

I can't decide between the glock 19 or 26 for CCW. Wouldn't the grip extension on the 26 make it a glock 19, height wise ?

[@rosemarsili9159]

Is this a good CCW and/or all-purpose gun for a woman? What about racking the slide? When I shot the gen 5 at the range, I had trouble removing the safety flag and holding the slide back simultaneously, which meant that the slide went into position when I did manage to remove the flag. As a result, I had to rack the slide to chamber a round and evidently wasn't able to rack it all the way back, which caused a failure to feed. I did not experience this with the other pistols I shot, not even the Shield Plus, which also wasn't the easiest. Is it a matter of practice or improving grip strength?

[@GunsGearOnTargetTrainingLLC]

Yes, try the M&P EZ . Many of my students who have issue racking the slide find this pistol a great solution. There are videos of the 9mm and .380 version on my KZbin channel. Hope this helps and you’ll subscribe and watch other content on my channel.

[@rosemarsili9159]

@@GunsGearOnTargetTrainingLLC I've shot the EZ before and it's reliable enough, but I'm more interested in the newer Equalizer compared to the EZ. I can also rack the Ruger Security-9 pistols (both full-size and compact) and the M&P 2.0 Compact, as well as the G19 and the Sig P365 pistols (and some others) without trouble using the push-pull method. So while I do have some limitations re: hand strength (thanks to a lifelong condition), they aren't so bad that everything else is impossible to manage, so I'm trying to keep my options open in addition to figuring out ways to improve my grip strength and technique. Thank you for the recommendation.

[@GunsGearOnTargetTrainingLLC]

​@@rosemarsili9159 For concealed carry I like the Glock 48 with Shield Arms Mags. but carried a G19 for years. Recently I've been using the P365XL for EDC. I have a significant handicap with my left hand and arm but have no issues racking the slide on any semi-auto. Best of luck and stay safe. Given you're comfortable using the "power stroke" or what you referred to as the push / pull technique I'd suggest trying several pistols and find what best fits your hand. Stay safe.

[@rosemarsili9159]

@@GunsGearOnTargetTrainingLLC I love the P365XL and have chosen it as my primary carry, but I'm trying to keep my options open in the event that I may need something different, so I'm asking around. Thank you for the reply and you stay safe also. :)

[@Broski__]

It's not as small as the 26 or P365XL, but the Walther PDP F-Series may be what you're looking for. Has a lighter recoil spring so it's easier to rack the slide.

[@aseemthakur1667]

what is the killing range of glock 26 ?

[@insertname290]

ok, so what would you choose as a only gun or first pistol out of the 26, m&p9c and the shield? all striker fired good shooting reliable tools out of the box but what's the best pick? I'm sure there's videos on this subject but I like your advice in your videos.

[@t77snapshot]

+ace yabishh Is this going to be a target sport, home defense or carry gun?

[@insertname290]

+t77snapshot already got the shield, looking to buy a full size now. reason for buying the shield was first off, I got a steal on it lol 500 for the pistol, the two factory mags plus 5 additional 8 Rd mags, gun bag, box of hollows, 2 boxes of target ammo, enough stuff to clean the gun for a year and to top it off l....it was NEVER FIRED. figured I could do it all with this pistol and I was somewhat right. I have smaller hands and even I wish the grip would fill my hands a little more. I think a full size m&p is next. would even consider buying a g26 gen 3 as my "full size" even though it's not much bigger because it's got a wider grip and capable of larger capacity mags (like 33rd and those glock drums ) I was on the fence about what kind of pistol to buy first but feel like I made a pretty good choice. have put 650 ish rounds through this little mighty mouse of a gun and not ONE issue. my buddy's g43 even jammed a few times on break in so I'm pretty impressed. anyways, thanks for the reply. figured I'd atleast share my experience up until now. has been a pleasure. only mod is I kind of scratched out the rear 2 dots for faster target acquisition at short range. other then that, don't feel like I need to do anything. might go for a tritium dot one day but as of now I'm more then satisfied.

[@GunsGearOnTargetTrainingLLC]

next time you're in Nh you can try it!

[@kietlam]

great video!

[@edgarrcastillo2464]

Wow. Great review and a great gun.

[@CJKrieg24]

I mean this in the most respectful way possible, and I am asking because I am truly curious. Do you have full grip strength in your left (support) hand? And does it inhibit your shooting at all?

[@GunsGearOnTargetTrainingLLC]

Sir, thanks for watching and commenting. I have limited use of my left hand and arm. Maybe a 40% grip when compared to my right hand. I hope you'll check out this video. kzbin.info/www/bejne/kIHRXmuDjN16q7c in it I domonstrate the shooting of my dominant and non-dominat hand. Best regards and stay safe!

[@CJKrieg24]

Guns, Gear & On Target Training, LLC I will thank you, I just found myself wondering because it seems you have great recoil management all things considered. Love the videos and excellent shooting

[@brentfoto]

Okay, understood,but are you sure it is a failure to fully seat or seating too deeply. On another thought, I do know that on a revolver like a 442 if I do a very slow and soft pull I am more likely to have a light strike with reloaded or non-factory ammo - but that's different operating mechanism.

[@chrisduncan3449]

I EDC a G26 with a G19 mag . I train my wife and daughters with a G26.

[@GunsGearOnTargetTrainingLLC]

The G26 a great pistol for sure. I actually have moved to the G48 with the Shield Arms 15 round mag. Very slim and reliable. with a 15+1 capacity and full sized grip, it's winner in my view. Thanks for watching and commenting.

[@bigrod0069]

Great shot dude

[@GunsGearOnTargetTrainingLLC]

Thanks for watching. Hope you'll subscribe.

[@brotherscoobs]

great stuff...a glock model i have not shot before...would be interesting to see how it feels compared to my M&P9c

[@andrewboyle2803]

I had a shield and traded it for a G26. Smith and Wesson ticked me off with my 9mm FS. The fact that they think the trigger is fine is unacceptable. I took some heat from a veteran that I would get rid of an American gun for an Austrian gun. I said that we need to step up.

[@alfredo0259]

Love your reviews, what part of nh are you in? I live in litchfield nh and all we have is indoor ranges, would love to shoot outdoors but dont know where to go, any suggestions?

[@GunsGearOnTargetTrainingLLC]

We have openings at Peterborough Sportsmen's Club in Dublin NH. Also if you're interested I will be teaching a Defensive Handgun Class on May 17th at my club in Dublin NH.

[@TonicLime1]

Nice review.

[@jeremyv821]

Seeing how in NY i can only have 10rds, Would you suggest the 26 or 19? it would be a CCW and range gun. im 5'10" about 185lbs

[@terrolsolo461]

Glock 26 the best way to go

[@darylragland1502]

You could move

[@kwasidevonmckoy3592]

did y9u ever find out what was that "Click" about? what kind of ammo were you using?

[@GunsGearOnTargetTrainingLLC]

No pistol can guarantee zero stoppages. Most of these are either operator induced stoppages or a problem with the ammo or the magazine. Knowing how to clear stoppages is an essential part of the manual of arms with semi automatic pistols. I appreciate you watching and commenting and hope you will subscribe.

[@ivanpadilla9875]

I love my glock 26 even tho I suck at the target range with it :( ! (It's still stock with stock sights)

[@somedude9443]

i have a glock 26 as well i hate the stock sights only complaint i have with the gun

[@GunsGearOnTargetTrainingLLC]

Roger that!

[@UserConn]

I shoot a G 26 more accurately than any other pistol. Doesn’t really make sense but I am learning to live with it. I can put eyes out at 29 yards

[@GunsGearOnTargetTrainingLLC]

Sounds like you have great skills. Thanks for commenting and watching.

[@krazy4knives2]

I've honestly only ever shot a full sized .45 as far as Glock goes. How would you say the felt recoil in the g26 would compare to say, an LCR or Aluminum j frame with +p loads? Subbed by the way!

[@GunsGearOnTargetTrainingLLC]

+Jesse Douglas G26 in 9mm is much softer than the LCR or J frame recolver

[@ronarmfield913]

I'm a retired NYPD Sergeant with department issued G26 with New York trigger any suggestions on lightening the trigger pull .

[@GunsGearOnTargetTrainingLLC]

Ron Armfield I would enjoy replace the trigger with the standard 5 1/2 pound connector. Simply purchase glock parts

[@ronarmfield913]

Tks for the reply

[@acso911]

What type of holster are you using in this video?

[@Skidz1818]

i have the EXACT same G26, with smooth finger grooves!!! Whats up with that? Is it rare? Is it better or worse? Any pros or cons to a Gen 3 G26 with finger textured finger groves? PLEASE HELP!!!

[@GunsGearOnTargetTrainingLLC]

I prefer the Gen 5 version and no finger groves.

[@darylragland1502]

It's a Gen 2.5 with smooth finger grooves. Doesn't make it worth more necessary but unique from the rest. It's probably a 1997 to 1999 26. I have one

[@tylorjones8459]

what kind of hallow points were those?

[@rikkilee9409]

are you shooting w both eyes open?

[@ivanpadilla9875]

You are suppose to

[@buddyringo21]

Some Good shootin!!! 😎

[@GunsGearOnTargetTrainingLLC]

Thanks for commenting and watching

[@OneLoneLegend]

which holster are you using?>

[@OneLoneLegend]

the glock is as capable as the shooter. Ive put thousands of rds threw a glock and its the same as the day I bought it.

[@Ok-551]

That’s a gen 2.5.