Glock 34 Gen 4 9mm Cleaning, No Talking

First cleaning of my new Glock 34 Gen 4, "Tactical/Practical" 9mm pistol. Cleaning comes after a standard range trip to break the gun in; 200 rounds fired. This level of fouling is typical.
The cutout on top of the slide is not a modification; normally a slide this long is too heavy to cycle the gun reliably, so Glock puts it there to reduce weight.

[@l.a.garcia9576]

Nice change of pace with no talking. Surely many others mean well but there is way too much superfluous chatter. Thank you.

[@peachysharks3068]

You have very nice hands and these videos are amazingly soothing. Beautiful gun.

[@marcs.6913]

easiest way to clean the lower & upper is hose out with brake cleaner, scrub, hose out again. Dry and use q tips for small areas. When they are clean, so is the gun.

[@robotcowhand1276]

Nice one. Can you list all the products you use? I'm a new owner and need to buy everything in one hit.

[@ericanderson9964]

Your videos are so soothing. I love your watch though. Where you get dat at?

[@DaveTalks985]

Great video

[@andrewlapensee]

Consider dropping the slide cover plate and clean the firing pin, and firing pin safety, i ran 800 rounds through mine, looked at the firing pin, and firing pin safety and it was pretty dirty, not to mention some tiny tiny pieces of metal/brass. And also check for wear on the shoulders of the F.P. Safety.

[@jaconbits]

I indeed do a full cleaning of the firing pin channel once every 800-1000 rounds. In fact, the firing pin channel was fully scrubbed only 200 rounds prior to this cleaning.

[@1USASOLDIER]

Very relaxing.

[@omgomg2107]

Dude you're awesome. Thanks for the video

[@rockman4351]

All was good except from the start where you remove the chamber from the body. It was hard to see.

[@DILLONOSH037]

Thank you for the video! 🙏🏻 thanks to you I can break down n clean it perfectly, btw your the fuckin Glock man broski 🍀 🔫 much appreciated wisdom my friend

[@karel3183]

For some reason, I find your videos ASMR-ish. Was it your intention?

[@BlazinblaiserVods]

Shouldn't you only be going one way through the barrel? I don't think you should be pulling it back out

[@mrarthur9183]

It doesn't matter with a plastic brush.

[@jaimeejordangilmore2182]

I appreciate this so much! I'm a single woman in a shed and I've been looking for recordings that I can play out loud to scare off prowlers. Could you maybe make a couple with you talking a one sided conversation or even clearing your throat or coughing. It's sad I have to do this however the only real men available right now are hardly real men.

[@AdrienHartmann]

so you dont lube the barrel ... WTF ?

[@jaconbits]

Sure I do. #1, the barrel is soaked in Ballistol and is only wiped clean. It leaves a very noticeable oily film. #2, I add a drop of extra oil to the locking lug. #3, I add oil to the slide where the barrel locks up to ease wear. These oil points are to Glock's spec.

[@AdrienHartmann]

***** youtu .be/jd9WbZQlwrU full lube on the barrel you r doing it wrong ~ but more lube on the barrel man

[@stag3t-muspsa910]

creepy...