Lenny Magill demo's our Pure Tungsten Guide Rod

Our Heavy Tungsten Guide Rods have been one of our Top 5 Best Sellers since we introduced it nearly a decade ago. To date, we have sold literally thousands. I have no doubt that most competition shooters who run Glocks… have one in their race gun.
Well if a little extra weight makes a big difference, what will twice as much weight accomplish?
Watch the video to find out!
The Pure Tungsten Guide Rod for Gen 3 Glocks is our #1257 and you can find it here: www.glockstore.com/Super-Heav...
The Pure Tungsten Guide Rod for Gen 4 and Gen 5 Glocks is our #1258 and can be found here: www.glockstore.com/Pure-Tungs...

[@kennethbillman5701]

Love the glock 22, thanks for the info, I will be purchasing one.

[@jwyatt521]

I got a new VHS tape called Competition Reloading with Brian Enos. The entire video I was like, “I know that voice really well from somewhere, but WHERE?!!” I found where that voice came from! Thanks for your years of contribution to our community. Much love, Lenny.

[@m17x4v7]

Where did you get a new vhs?

[@jwyatt521]

@@m17x4v7 Roots Market in PA. Epic NOS find

[@jwyatt521]

Lone Ranger - In the video it teaches how to load your own rounds using a Dillon press. It shows Brian Enos, who is a competition shooter, being interviewed by someone off camera. In the video it never shows the off camera interviewer, but through the entire video I was bothered by the fact that I knew the voice so well, yet couldn’t quite place who it was. It was a video produced by Lenny Magill. I was pretty excited when I figured it all out.

[@josephwyatt6177]

I have that same video. Been watching Lenny for years. He's a treasure.

[@janvodros8238]

Nice video,.Thanks Lenny.

[@dongray9852]

Just got and installed my tungsten guide rod. WOW! That's all I've got to say, Len... WOW! 👍👍👍

[@a.k.4363]

Will probably get one at some point... good video.

[@balamala2647]

I bought a Gen 4, G-19 from Lenny. I want to return to improve it esthetically.

[@hammondclarke942]

I believe in this man, the conviction in his words. Plus even when he is imagining and demo holding a gun or holding thr gun in his hand describing how to shoot he puts his hands in propped position his body behind it u can see its built into him and he always safe checks his gun as he picks it up. Respect

[@smoothshot8925]

Relax dude u sound like your about to orgasm lol hes supposed to sound like that its buisness hes trying to sell these products and take your money thats the whole point lol

[@nickfrancis]

Great, I hope you eventually make these for the big Glock 20 and 21's?

[@nakotaapache4674]

i like that you made out of a cheap and easy made Glock a precious and esthetic gun / glun glock gun

[@rickwingate7775]

Definintely shoots flatter, i love it. The 13lb spring is too soft after 500 rounds the slide doesnt close all the way when manually racking it. I got a 15lb spring and cut 2 coils off so it's like a 14lb.

[@sethrich5998]

Are you running a factory weight striker spring or a reduced power one? The striker spring works against the recoil spring. A good test of this is to see if it fails to go into battery with the trigger held back but does when released.

[@mrkt2866]

Hi! Planning to buy one, but not sure which spring weight to choose for my glock 35 gen 3. Thank you

[@brotherscoyote]

Might be a dumb question, but will Wolf springs fit this, or do I have to use proprietary springs if I switch to this?

[@alexandernassar6944]

Thanks a lot for all your awesome videos But I have a question for and that I got an answer I carry glock 20 sf and Underwood ammo 115 gr extreme defender (1700 fs) what recoil spring whight is the best for this hot ammo? Thanks alot

[@randyharden5427]

We need a Nashville update video!!!!!!! I can’t wait for the grand opening I’m Savin my money. Well I’m trying you won’t quit coming out with all this new parts!!

[@glockstore]

It's coming soon. We're working on our SHOT Show videos right now, but the latest Nashville Update will be right after those. I'm thinking mid to late next week.

[@ammoinvasion3372]

I have the 4th gen tungsten guide rod for a g19, I am curious if the spring is replaceable or is it considered garbage after it wears out?

[@Eduardo_Espinoza]

i would like to see a test

[@richardmartin7179]

Lenny, I recently purchased a Gen 4 21, I've been learning from you well before this purchase and I'm thankful for all of you're knowledge. I want to get a pure tungsten uncaptured guide rod for my 21, does the one you sell for the 17 work in a 21?

[@JW02828]

On the UNCAPTURED guildrod spring not as compress as the Captured guildrod when installed???

[@rickhoneycutt6010]

I got a question I'm running a polymer80 pf45 with a compensator what spring weight would be recommended to run reliable

[@clausziegler5720]

Hi, you are offering a "captured" and a "non captured version" of the "Pure Tungsten Guide Rod". Obviously for a carry gun I would prefere the captured version. I do not see how the captured version is assembled. Would it be possible that I change the spring by myself if it is getting weak over time by myself? Is it the same principle with a fixing screw and locking glue like with your standard steel guide rod? Could the GRT tool be used? I am nit sure because it looks like that the diamter of the Pure Tungsten Guide Rod is larger than the standard steel version and whether it will fit into the GRT??

[@RimfireAddicted70]

On a Gen 5 G34 Uncaptured .....does it require a bushing or any adapter to use or just spring and rod?

[@Robespierres_Ghost]

This is designed to add weight to the handgun yet the website doesn't list the weight of the guide rod. What sense does that make?

[@CA.0verview]

Where can I found that Glock barrel 3:45 ? The one being used as a demo ! I’d love to have that . Dose anyone know what item number it is. I’d go grate with my gs pure tungsten set up .

[@paulrampon1167]

Is the short tungsten rod recommended for a 43X?

[@gabrielbernal9779]

DOES IT WORK JUST AS WELL FOR THE 10 MM GLOCK 20 ?

[@zokerr]

Any plans to offer one for a G41?

[@TXetc]

Saw those jacked arms in the thumbnail and thought this was one of my fitness channels I follow at first lol

[@mikeschneidersr2735]

are there any tricks for installing new guide rod, and are there any problems if it extends past the frame,

[@thatmikereed]

If it extends past the frame you bought the wrong one.

[@saulsolomon4396]

Can we trade in the previous model? Only bought them recently!

[@harryshewan807]

Hi lenny do you have it for glock 26 gen 5?

[@Tmanaz480]

I would pay to hear a conversation between Lenny and Harry Shearer.

[@paquitolarajr.9285]

How can I buy one for my g23 gen5. Im in the Philippines

[@don20190]

Lenny, newbie question. Will Gen 4 backstraps work on Gen 5's?

[@iamdrichy]

No

[@user-gx7yn8pn9c]

I wanted to get one but it’s 120.00

[@jeffmitchell6867]

Bought my first glock it was a glock 34 first two shots jammed very disappointing

[@CallsignWulf]

Only gun I've ever needed to change a guide rod/spring on, is a CZ P07. The things are set up for hot NATO ammo, and the slide is tiny giving you barely any grip to rack it. Anything else, should really stay stock for reliability. Save the money, buy ammo and train instead.

[@paraglidingnut26]

Agree with shooting/training. Disagree with not changing out springs,

[@thatmikereed]

For competition shooting with lighter loads, lighter springs make a huge difference.

[@zinoorr1056]

What Weight spring comes with a store bought Glock 19, 17

[@iamdrichy]

Usually its 17 lbs stock

[@philiplucky7170]

Hey Lenny do you ship overseas

[@AllanPowell]

is it CC friendly?

[@thatmikereed]

My credit card loves it.

[@ItsJimmy710]

Why does everything in this video sound like innuendo

[@johnnysmall4206]

We need a Glock 42X. I want a Glock 42X.

[@illfaptothis333]

just so we're all clear lenny is a great guy but this is all just cosmetic at best for your gun

[@katana258]

always on b.o. but they take your $$$ ... scam co never buy from these cali rip off con man

[@azzpizz5057]

Pure tungsten !!!! U mean your old one was from china ...50%tungsten 50% bullshi! SMH...😬

[@glockstore]

We purchase the tungsten/copper hybrid metal for the original Heavy Tungsten Guide Rods from a US foundry in Carol Stream, IL.

[@jr0079]

@@glockstore Yeah..USA

[@aaroncortez8347]

Whats a good set up for glock 23 ? Full tugsen and the standard 17 lbs? Or should i move up or down in weight for less recoil?