GlueTread Sidewall Repair: How To

GlueTread Sidewall Application Process:
Step 1: Prep the Surface. Thoroughly sand down around the damaged area
Step 2: Apply Adhesive to the Damaged Area Hold the damaged area back together. Allow 1 minute to cure. Re-sand to remove excess adhesive.
Step 3: Measure Patch and Trace on Tire Cover at least ½ inch around the damaged area. (more edge is better)
Step 4: Apply Adhesive IMPORTANT: Follow the adhesive pattern instructions and use tiny dots of adhesive in a grid like patterns. Immediately and carefully set patch in place. Apply pressure evenly for one minute. Ensure edges and corners are fully adhered.
Step 5: Apply Accelerator Allow 1 minute to cure. Inflate and ride!

[@FRND23]

Do you need to put out air from the tire?

[@HOTRODMONZA]

Dude if you got a CUT LIKE THIS YOU GOT NO AIR wtf are you SMOKING