GMC Yukon 2007 - 2014 6.2L How to Clean and or Replace Fuel Injectors or Seals. O-Ring Replacement

Please remember to wear all of the proper PPE when doing work that can cause bodily harm. To get the most out of this video, please watch the whole thing. Although my vehicle repair was successful, I made a couple of mistakes during the job that you should easily be able to avoid if you watch the entire video.
Tools and Parts needed for this job:
Multimeter in video: amzn.to/3spBjBG
Fuel line quick disconnect tools: amzn.to/3soMvOJ
Fuel Injector Tester & Adapter DIY Cleaning Tool Kit: amzn.to/3HjgL1S
Fuel Injector O-Ring Kit: amzn.to/3IsHR8b
Pick tool to remove O-Rings: amzn.to/3soNgY7
Telescoping Magnetic Pick Up Tool: amzn.to/3Hu72FY
Fuel Injector Micro Filter Basket Filter: amzn.to/3M9ca5R (I did not replace these, but you can)
Fuel injector cleaner aerosol can: amzn.to/3hni0CI
Carb / Choke Cleaner (good to have on hand): amzn.to/3pkgjdF
Break Parts Cleaner (this is basically what I used in the video and it’s good to have on hand): amzn.to/3HjjbgY
Good screwdriver set: amzn.to/3JYX5SF
Preferred ratchet/socket set for multiple jobs: amzn.to/3vjy2FO
Cheaper “decent” ratch/socket set: amzn.to/3vu7eCC
My preferred shop towels: amzn.to/3vnVLoi
My favorite fuel injector cleaner that you can add to your fuel tank: amzn.to/340AKVy
My 2nd favorite fuel injector cleaner to add to your gas tank: amzn.to/3JYjvn8
Good bent nose needle nose pliers: amzn.to/3ho9xiq
Good Set of needle nose pliers: amzn.to/3hikVfX
The hose I accidently broke and replaced: amzn.to/3vr8syC
PPE Needed for this job:
Face Shield: amzn.to/3tbDZSC
or
Safety googles: amzn.to/3vmVe6e
or both.
Good Nitrile gloves: amzn.to/3HuYsXn
Best Nitrile gloves (that I use. They’re thicker): amzn.to/3vmctUV
Best “bang for the buck” Nitrile gloves (I use these a lot too): amzn.to/3M5SsYD
My Recording Equipment for this video:
I use this wireless system but with a different microphone. It comes with a single or dual transmitter setup. It also comes with decent lavalier microphones, but I use better ones that I have.
Dual Transmitter Wireless Lavalier Microphone System: amzn.to/3vmhQ6x
Single Transmitter Wireless Lavalier Microphone System: amzn.to/3Iy3HY0
The Microphone I use with this wireless system: amzn.to/36LafEy
The same microphone but has connector for a smartphone: amzn.to/3HoX9tk
Upgraded version of the camera I use. The one I use is the AX33 and it’s not for sale on Amazon anymore. amzn.to/3spO5QE
Awesome Smartphone Gimbal Stabilizer that I use when recording with my Smartphone: amzn.to/3hmdzbb

[@Tohliah]

Thank you, this is very useful for anyone who wants to clean the injector himself

[@marcussims6494]

Awesome job

[@thomasc.rizzosr.]

Pal you did just what you were supposed to do, show us DIY'ers just how to patiently do work on our cars. Keep up the good work and your patience is something to cherish, i would have said a few unmention a bulls lol . Tom of cape coral fl. Got a caddy escalade Hybrid that i am doing the dame thing and thanks again for the blow by blow on how to do it. Much appreciated.

[@RyOnDrums]

Great video….thanks for taking the time to make this for us all.

[@jbaz964]

good job and thanks for the video! I also struggled with the gas line disconnect but it came off really easy by sliding the tool up and then pulling the braded side really hard towards the tool and push them together. it popped right off. take care.

[@AE-ds8be]

Great tip, thank you! Thanks for watching! :)

[@Princeofmarketing]

Great job and was honest to say you are a DIYer. Keep on Posting! , your hardworking is much appreciated. 👍

[@AE-ds8be]

Thank you! Your feedback is much appreciated and it's these type of comments that keep me going!! Thanks again!! :)

[@tortaboss2137]

​@@AE-ds8beww900cc:😊😊

[@viktorkalashnikov2871]

Very good video you gained one more subscriber

[@AE-ds8be]

Thanks for the sub and thanks for watching!! :)

[@Edi-01]

Hi there sir how are you doing hope you doin good my name is eddi I have a Cadillac Escalade 6.2 and had lots of issues but took. A risk since I have watch these videos of yours men is very easy explanation my car runs Better than 8 month ago thank you again god bless u

[@AE-ds8be]

Hi Eddi!!! Glad it helped! Thanks for watching! 🙂

[@erra4electronics]

Hi bro How are you doing? Happy to be the Second one to subscribe ☺️ keep on like that, that's cool 😎.

[@AE-ds8be]

ERRA, Doing good man! Thanks for asking!☺ How are you? Thank you so much for subbing, I definitely appreciate it! 🤝🤜🤛🤙

[@stephen6866]

Alright ! I'm having misfire on number 8 , plus to lean code which points to a fuel injector .

[@AE-ds8be]

Might be a bad ignition coil too. Did you test that? How did your repair go?

[@skitdaddle0078]

Just have one ? Is there a fuel filter on the 07 gmc yukon denali, and here is it

[@AE-ds8be]

On this vehicle, there is a fuel filter built into the fuel pump assembly but there is not one anywhere in-line underneath the vehicle. Hope that helps! Thanks for watching and for the comment!

[@1PaJoe]

Got to be a better way to clean the injectors

[@AE-ds8be]

Joe, you may be right. Cleaning these with that little adapter wasn't great. It wasn't that terrible, but it also wasn't great. They do make and sell a machine that would have probably been a bit easier to use. If I did this type of job on a regular basis, I would definitely look into buying one. I was originally looking at buying this one: amzn.to/3yRqdrD but then decided it would just make more sense for me to do it the cheaper way this time. Thanks for watching!!

[@davntelisha19]

Its almost like it would be better to take the hole intake out with fuel rail all together

[@AE-ds8be]

Maybe. Why do you think it would be "better"? Thanks for the comment. Looking forward to hearing back from you.

[@davntelisha19]

Just Eazyer and you can clean all the ports why you there

[@AE-ds8be]

@@davntelisha19 that's a good point. Clean a bit and replace the gaskets while there. Definitely a great idea if you're already going to do this job. 👍☺️

[@davntelisha19]

@@AE-ds8be yes replace gaskets clean ports and give it a fresh start again

[@stephen6866]

Ebay ! $70.00 and you get 8 brand new fuel injectors !

[@AE-ds8be]

True, but are they knock offs and/or cheaply made injectors? I honestly don't know. I can tell you this, after I did this cleaning, it didn't fix my issue. So I did buy some cheap "AC Delco" ones on Ebay and installed them. My lean condition still remained. So I then went and fixed some vacuum leaks. My lean condition still remained. After I was confident that all of the vacuum leaks were fixed, I went ahead and reinstalled the original AC Delco injectors that I cleaned in this video and sure enough, my issue was finally resolved!! So I'm not saying don't go with the Ebay ones, but for me, they definitely kept my Yukon running lean. I've driven it a few hundred miles since got it running right, and I've have no issues. Thanks for the comment though and thanks for watching! :)

[@gustavodena7978]

Gracias amigo bien entendido