GodHand | How to use the GodHand nippers |

[@diabeticmonkey]

I appreciate the the tutorial. I just grabbed a pair of godhands and I can’t wait to use them

[@HearnsHobbiesMelbourne]

Thank you for watching and glad I could help.

[@anthonylong601]

Thanks for that mate. Its been so long since I adjusted mine. I hope you huys are going to leave them on the web as this is a great reference. I look forward to more of these.

[@HearnsHobbiesMelbourne]

Thank you for the good feedback! Yea this will be here for good.

[@DarkMetroid777]

Never knew to oil my god hand, very good to know. I want to take care of them for how much I plan to use them. Very informative video. Thank you!

[@HearnsHobbiesMelbourne]

Thank you for watching and glad it was helpful!

[@WR3ND]

Thanks for the instructions. My SPN-120 came with a small gap on the stopper screw, and I don't want the blade being damaged.

[@HearnsHobbiesMelbourne]

You are welcome. Thank you for watching!

[@jammywesty91]

Thanks for making this. You've helped me to adjust my new DSPIAE 3.0s!

[@HearnsHobbiesMelbourne]

Glad to help! Yes, the technique will work with any nipper with an adjustable travel stop screw.

[@foreverendeavor7383]

Believe it or not I find the DSPIAE ST-A 3.0 to be better than the God Hand SPN-120

[@kobrakai9]

Cool review, mate! 👍 😎

[@HearnsHobbiesMelbourne]

Thanks! 👍

[@gun_damn7885]

Really helpful just got a pair of godhands and the grub screw wasnt set

[@HearnsHobbiesMelbourne]

Glad you found the video helpful!

[@mattr.1804]

Hey thanks for this! Are you able to let me know if CLP (gun oil) is okay for use on god hands?

[@HearnsHobbiesMelbourne]

Any light machine oil such as gun oil will be fine. The aim is to protect the surface from corrosion and keep the joint moving freely.

[@mattr.1804]

@@HearnsHobbiesMelbourne gotcha - thanks!

[@ericsontanabe2298]

Mate, what specific oil you used here?

[@HearnsHobbiesMelbourne]

Any thin oil used for tools or machinery is fine. Depending which part of the world you are, it can be known as sewing machine oil, tool oil, or gun oil.

[@JediSeraphim00]

does DW 40 work as a oil lubricant for maintaining? if not, what type of oil is best

[@HearnsHobbiesMelbourne]

WD40 in not recommended. Light machine oil such as sewing machine oil applied as a very thin coating will be perfect.

[@brubearto]

Will the lube used for airbrushes work for maintaining the nippers?

[@HearnsHobbiesMelbourne]

Lube for airbrushes can work although they are thick and difficult to insert into the full joint. A very light machine oil, like sewing machine oil, is the best. This penetrates the joint and the excess can be easily rubbed over the steel with a rag.

[@skatetool87]

@@HearnsHobbiesMelbourne how often do you oil them?

[@RathalosEmperor]

I just ordered my first god hands I'm new to gunpla and been using some crappy Nippers I got in a hobby tool set

[@HearnsHobbiesMelbourne]

You are going to love your GodHand nippers! Thank you for watching!

[@RathalosEmperor]

@@HearnsHobbiesMelbourne I just really hope I don't break them so fast.

[@SO-kh4le]

Very nice 👌

[@HearnsHobbiesMelbourne]

Thank you!

[@skatetool87]

What are the nippers you doing the first cut with ?

[@HearnsHobbiesMelbourne]

Sorry, I don't remember as it's been awhile since we have had them. They are nothing special but basic nippers for model building. They are not so important as their job is just to remove the part from the sprue in preparation of removing the nubs with the GodHand nippers.

[@skatetool87]

@@HearnsHobbiesMelbourne ok so the last cut with the God Hands the nipper is flush up against the part?

[@HearnsHobbiesMelbourne]

Yes, that is correct.

[@skatetool87]

@@HearnsHobbiesMelbourne ok, I’m trying to skip as much sanding the nub mark as possible, thanks.

[@AegisHyperon]

WD40 is a lubricant right

[@HearnsHobbiesMelbourne]

Correct

[@TravisHi_YT]

No, it's a Water Dispersant. You should use lithium grease for metal on metal.

[@joeynuggetz]

Next time mount your camera in the front yard and then do the review in the backyard. At least we could then have a laugh.

[@HearnsHobbiesMelbourne]

Thank you for the kind suggestion. Enjoy the laugh and don't come back please.