Godox QR P120 Softbox Review + Workshop!

[@keeswillems4637]

one of the only reviewers i found who understands the difference between soft hard diffused and specular!

[@viciwo3396]

2yrs after, this video is still very relevant. Thanks for the video!!!

[@brunomamede2352]

I could not be happier. I bought the Godox Knowled M600D Daylight LED for $999, and Adorama sent me the Godox QR P120 Softbox as a gift. Best of both worlds, light and softbox.

[@ArtVideoProductions]

Wow! That was a deal!!! I have both the 600D and Bi. Beast of a light.

[@MichaelBabich]

Great recommendations. Thank you. There is a better way to install a softbox into a bowens mount. Don't pick up softbox itself. First, install a light onto softbox while a softbox is face down on the floor with the mount up. And then you'll have something to grab-light or handle-to pick the whole thing up and put it on a c-stand. That's a much faster and easier way instead of trying to install a huge softbox while light is on the c-stand.

[@ArtVideoProductions]

Yes. On the floor is also a great way . I actually do that sometimes . Since most surfaces I shoot are not clean, such as outdoors, factories and other industrial environments I mount as shown. Thanks for watching 🙂.

[@Mike0193Azul]

Appreciate very much for explaining and showing us what true parabolic lighting is and how to use this softbox as such with an inverted light. Thanks as well for all the techniques on setting up and storing the soft boxes and grids and the small lecture on light physics 💚

[@ArtVideoProductions]

Thank you very much and also for being a long time follower. Because of the viewers like you, it is a pleasure being here and I’m glad my content t is useful. I try my best. Thanks again.

[@carolinamaristad9369]

Thanks for this amazing video! I just tried mine today, it's the same size and model, but it was a horrible nightmare to open it. I couldn't do it. I will try your technique. 😘 Thanks again😊

[@ArtVideoProductions]

@@carolinamaristad9369 my technique will make it fun instead of a nightmare trust me.

[@carolinamaristad9369]

@@ArtVideoProductions thank you!! So nice that you reply back really fast! I appreciate it. I can't wait to try again😊

[@hsnorh8180]

very under rated channel. with this quality you should have more subs.

[@yashiel]

One of the best channel for gear review. Very insightful and talk about nitty-gritty stuff. Very educational

[@yashiel]

Wish you have 1M subs sooner than later.

[@ArtVideoProductions]

Thank you, twice. I appreciate that.

[@tee_ef_em]

Fantastic review. Perhaps, the most informative video I have seen on these topics. I can't wait to play with the parabolic techniques you demonstrated.

[@ArtVideoProductions]

Thanks again for watching multiple videos. Please feel free to browse more. Every video is like these. However, the parabolic stuff I showed here is just for fun. There are real parabolic modifiers that Godox also makes. But they start at $1400 or so. With those, you get the real thing. Broncolor brand is the leader on those. Some parabolic stuff they make cost over $15,000 🤣

[@momentsbyron]

Thanks for sharing tips on setting up and tearing down the softbox 🙏

[@PrendosNewZealandLimited]

Love that technique recommendations. Never been able to get my old style boxes up and down as fast as what you showed, but I'll give that a try for sure.

[@ArtVideoProductions]

Once you get the hand of it, you’ll be able to setup huge old school softboxes as well. The bigger they are the more tension 🤣

[@Drakaryslisa]

Wow muchas gracias por toda la información! Resolvió muchas dudas que tenía, hoy compraré el mismo, estoy emocionada 🎉

[@ArtVideoProductions]

Muchas gracias! Muy amable usted. Por favor, utilize mis links. La link no cuesta nada extra Y eso ayuda el mi canal de KZbin para hacer mas videos como este 🙂

[@poobiusstormwind7578]

Dang someone get the Guinness on the phone this man is going for faster softbox setup and take down! Great review man keep it up!

[@ArtVideoProductions]

Watch the video twice and you can do it too 🤣

[@indiandiesel6499]

Great video, one of the best where everything is explained. Great techniques. You are the fastest 💯😂👍

[@ArtVideoProductions]

Thanks man. That means a lot to me. 👊

[@michaeltsatsuaxolu7774]

I learnt so much about diffussion in just this video. Thanks so much for sharing

[@ArtVideoProductions]

@@michaeltsatsuaxolu7774 glad it was educational 👍

[@PreethamRameshNaik]

Hi Sir, Your reviews are detailed and useful… which stand works best for godox UL150ii with this soft light?

[@DF_Didi]

Meric for your video was realy helpful - especially Assembly instructions

[@misoPOW]

Thank you! This is so helpful in understanding how to properly use a parabolic mod. Just curious what boom arm setup you're using in chapter 4.

[@ArtVideoProductions]

@@misoPOW I’m using an impact boom arm from BH

[@PWiessenthaner]

Hello, thank you for the detailed description of the structure of the softbox and its use. I have a question. I have a Godox LED 150W light and from what you said the 120cm softbox would not be ideal for it. What do you think, should I better buy the 90 cm softbox for it? Thank you very much for an answer.

[@ArtVideoProductions]

The 90 will work. I use it for 150 watt lights.

[@Karanja59]

Great video, was looking to purchase this soft box and you’ve made my mind up 👌

[@cyberairwolf]

i just bought a godox ad600 pro, would you recommend this or an umbrella style? *soo you can screw in a small deflector/Beauty Dish Plate in the middle for even dispersion of light* was looking at Godox S120T but got sold a QR120T instead without the an intention of using contant lights as I only have a strobe(ad 600pro)

[@tmjr]

What an amazing and thorough explanation, learned a lot from it :)

[@ArtVideoProductions]

Thanks a lot!

[@marike1100]

Will a typical light stand like my Impact Heavy Duty Air Cushioned support this softbox? Or do I need a C-Stand? Thanks. Good review!

[@ArtVideoProductions]

Absolutely. I use these BH impact stands a lot. Just MAKE SURE you set the legs correctly, as wide as it can go. It will support anything from a soft box to a heavy 2X1 light panel

[@Markpatrickrich]

Great video thank you for your all your tips and information sending you positive energy from Southern California

[@ArtVideoProductions]

Thanks Mark! Same positive energy back to you from PA!

[@andyvan5692]

one tip, in the para 88 instructions from Broncholor ( the video with the lady in it), they assemble the bracket to the para on the floor, then heave the thing onto your shoulder, facing rearwards, your shoulder is the pivot point, and all the fiddling you have to do is drop the socket on the c-stands pin, and do up the screw, no having to align the slots & twist the whole modifier. far easier on ones back, legs, arms etc. esp if you do it all day.

[@ArtVideoProductions]

The parabolic thing that with the “rods” and all, I did it for “fun”. No one will use this softbox for that. And it’s not a true parabola shape. You’ll be paying at least $1000 for one. Godox also makes it, designed for photography. Godox Parabolic 88 Reflector (35.4")

[@andyvan5692]

great video, but one other notable mention, the Breise light system, this has a focus reflector system in which continuous tungsten or HMI lights as well as flash can be accomadated into this modifier, with appropriate power balast, and focussing head system.

[@shanestewart7820]

Great and informative video. I have been looking to get the 90cm version as my first softbox and I am glad to have come across your channel and this particular video. You have clarified so many things here that as someone new delving into studio lighting am trying to learn more about. Keep up the great work! 👏🏽👏🏽

[@sujanneupane3208]

Does this softbox compatible with Godox AD600 BM Bowen mount

[@tintin69rr]

Awesome just starting to build up my studio set and been checking out a few different soft boxes just a thought that zip on the side is that to allow access so you can put in or take out a beauty dish style center reflector isn’t that an option with this soft box ? Great video 👍

[@ArtVideoProductions]

I honestly don’t know what that zipper is for.

[@dorianvocalartist]

you have the most informative reviews, thanks! 👍

[@ArtVideoProductions]

Thanks Ismaeel!

[@amarshah8309]

Nice video. Do you think using godox ad200 with this qr 120inch size is a good to photograph a dog in indoor studio?

[@ArtVideoProductions]

Using flash, no problem. Plenty of power. Plus the bigger the light, and put CLOSE to the subject, the softer it gets.

[@beyondfilm]

Amazing content is a very short period. That you!!!

[@tazonline21]

@15:50 remove the s2 bracket from the stand, install it at the back of the softbox and then install the whole thing on the back on the stand 🤷‍♀️

[@DobuitaDave]

Cool video... I'm just deciding what size to get the 90 or 120. Do you think bigger would better? I shoot portraits & events/weddings which involve groups. Thanks

[@ArtVideoProductions]

For the softer light as possible, bigger is better and CLOSER is better. That’s why I chose this size. I also use a 7’ x 5’ giant modifier for that same reason.

[@DobuitaDave]

@@ArtVideoProductions thanks for quick response

[@JoATTech]

Can you collapse it with grid attached?

[@Minotaurus007]

Since this a parabolic reflector, can you please comment on the quality of parallel light when used as a parabolic reflector with the light source set in the focus point?! Because there are "cheap" paras out there being 10times or more expensive than this one.

[@ArtVideoProductions]

To get an actual parabolic light source really designed for that you’ll have to pay at least $1500 to $9,000 for 1. Godox makes them too at affordable price while Broncolor can cost you a lot. The parabolic thing I showed here is for fun.

[@alexanderhaas5152]

Thanks very much for that nice tutorial!!! Cheers and have a nice Day :)

[@ArtVideoProductions]

Thanks Alex!! You too bro 👍

[@andymorris1110]

Would you recommend using this with a Godox V1 flash? Is it powerful enough? I want to have 1 soft box and use a flash for photography and a COD light for video.

[@ArtVideoProductions]

For a soft box this big, I recommend something more powerful such as a studio flash or a 300 watt LED. Godox AD600B / Godox AD300pro

[@IzanSoria]

I own this 120 parabolic softbox and also a Godox UL120 and the UL120 does not hold the weith of this parabolic softbox. Then I saw that you are actually holding it with a different piece. Can I ask what would be your recommendation for setting it up well? Thanks!

[@iamchriseagland]

Brilliant video. Thank you. Please could you let us know what stand you use with this softbox?

[@ArtVideoProductions]

Thanks. I just added the link in the description.

[@TheJadedFilmMaker]

thanks for uploading 🙏

[@Naiddou]

if the inner cloth got a stain how do i clean it please help ?

[@ArtVideoProductions]

I guess, you can put it on bleach with warm water and gently rub it. Wear gloves!

[@lovelysassyd]

With this size soft box are you able to get good light for full length portraits?

[@ArtVideoProductions]

Full body: Place the softbox at a minimum of 5’ away from the subject. This softbox is 4 feet in diameter. Huge. Plenty of light coverage.

[@sirachuchchienthaworn389]

Very informative video. Thanks

[@camcappe353]

I have a 90, you think I can still get a parabolic effect with a strobe mounted in a parabolic focusing mode?

[@ArtVideoProductions]

That was shown just for “fun”. Godox makes actual parabolic real ones but the cost at least $1,400, broncolor PARA series is 3 times that…parabolic is rather expensive but it’s the real thing. Here’s the link amzn.to/3XcDbLj

[@camcappe353]

@@ArtVideoProductions Yeah I know haha but I figured if this gets you 80% of the way it could create a meaningful and interesting image and wondered if my p90 could get me 80% of the way also.

[@sternschnupper]

great video, with so much information about small but important details!

[@ArtVideoProductions]

That’s what we do. Details. It’s like having the item in your hands. Thanks!

[@theautomationchannel6920]

End shots are very nice..is it 200 led light chain?

[@NadeemZurbaArts]

Very informative, as for your note on the fixed ring-mount and in order to get it solved (rotating) just loose the the 3 screws a tiny bit :) i've done it and worked just fine and secure, Peace,

[@ArtVideoProductions]

Thank you very much for watching.

[@anirbanmukherjee1516]

A very informative video. Can you suggest a focusing rod for this softbox just like the broncolor has a rod to insert the light deep or pull it back wide? It will be really helpful. Thank you so much.

[@ArtVideoProductions]

The only option, as shown, is to use a C-Stand or any sort of boom that’s sturdy enough to hold your light. Thank you for your question and for watching my video.

[@ArtVideoProductions]

Godox just released a true parabolic focusing system. But the price starts at $1200 to $1700. But still, way cheaper than Broncolor. As for the “rod” improvisation in the video, I think that’s the only way…

[@SummersSnaps]

Wonderful review, very thorough. I have just a few questions if I may; 1) I realise in order to take advantage of the parabolic nature of the P120 we should use a rod like you demonstrate, but having 2 stands (one for the P120 and another in front of it for rod) is too much. What kind of 'all in one' rods and stands can you buy that would allow something from an AD200-AD600 to slide up and down the rod but also be part of the whole light stand rig? 2) The sample shots at the end with the subject, this was with diffusion, yes? 3) Can the box be collapsed with the inner diffusion left on as well as the other? Or will it kinda 'fall off' as the box is compressed down? This looks like a good modifier, something that 'can do it all', just trying to figure out really the other parts I may need to make it all come together now.

[@ArtVideoProductions]

Thanks for the love. Yes, all diffusers remain insure like shown. The rod thing is not really for normal softboxes. These are really, really expensive starting at $1500 from Godox and $6000 from Broncolor. Yes, all shots at the end were takes with the softbox in normal use. Diffusers on.

[@SummersSnaps]

@@ArtVideoProductions Thank you. There must be a way to do a rod thing without paying so much for them? Can a boom arm or something somehow be adapted?

[@_photoruns]

what is the name rod you push pull to manage the focus point of the lighting? can you share the link where to buy it, thanks in advance!

[@ArtVideoProductions]

Hi, thanks for watching. Here’s the video link for it and the link to buy is in the description. kzbin.info/www/bejne/mXK6eIabaLisfdE

[@Jyotirmayshuva]

I have Nanlite 300B. Is it going to fit with the mount?

[@ArtVideoProductions]

I don’t see why it wouldn’t fit. it’s Bowens mount like any other light.

[@Jyotirmayshuva]

@@ArtVideoProductions Thanks!

[@andyvan5692]

one tip, this is Centimeters, as 12 inch = 1 foot, so 120" = 10 foot, and this extended looks only about 3 to 4 ft wide, so NO go, it has to be cm. (47 & 1/4 inches to be precise), or 3.94 ft for those in the imperial or American realm.

[@ArtVideoProductions]

I’m from Brazil. Metric is my native measurement. 120cm is 4 feet. But for you, is exactly 3.93 ft

[@emersonmaciel5817]

@@ArtVideoProductions O cara é Brasileiroooo !!!! Parabéns pelo trabalho incrível, eu estou na Austrália e to pensando em pegar um desses pra levar, minha dúvida é a luz tenho o Ad200 em mente, mas vc recomendaria algo ? no caso meu uso seria para retratos e ensaios internos claro.

[@ArtVideoProductions]

@@emersonmaciel5817 Fala primo! O QR-P120 é muito grande e pesado pro AD200. Não recomendo pra esse flash. Também, o formato parabólico é muito fundo, no qual necessita um flash mais potente. Recomendo um softbox de até 60cm e escolha uma softbox mais rasa para que a luz saia com mais facilidade.

[@monstermayank]

A very extensive video. You seem to be a very meticulous person. Since you mentioned that with double layer of diffusion it wont actually behave like a parabola, should I get a Godox SB-UE120 softbox for my Godox SL200Wii video light?

[@ArtVideoProductions]

Comparing the godox godox SB-UE120 to this one, I still prefer the Qr-P120. The only thing you can buy to produce a parabolic effect would be the Broncolor Para series. If you want to “play “ parabolic, you can do what I’ve shown in the video. But for regular diffusion and less of a deep softbox, the godox SB-UE120 seems to be a good choice as well. Either one Godox models are kinda pricey too…

[@monstermayank]

@@ArtVideoProductions I'm getting a P120H for $75 while QR120 is for $115. Is the QR model worth the extra price. The fiberglass rods model P120L is for $79.

[@ArtVideoProductions]

@@monstermayank I believe the P120 will do just fine. And the price difference is considerable.

[@monstermayank]

@@ArtVideoProductions Thanks for your guidance. It seems unlikely that QR120 would see a lot of travel. Today I ended up with a cheaper solution. Inspired by the style of usage for a parabolic umbrella in your video, I aimed my SL200Wii upwards into an umbrella style 120 inch softbox,meant for a speedlight and the result was so nice. It seems I might not even need any other 120cm softbox as of now.

[@no1slisteninganyway]

Thank you. That was very educational.

[@chipcurry]

Great job! I want one.

[@ArtVideoProductions]

I’m not sure why this particular model Softbox video is the #1 top of my 150 videos and it gets more views and interest than cat videos.

[@ShaneBaker]

Terrific video. Many thanks.

[@ArtVideoProductions]

Thank you as well! Feel free to browse the channel! Lots of good stuff here 🙂

[@HieuChristensen]

Thank you sooo much for this video

[@justcallmesando]

Nice and accurate info

[@ArtVideoProductions]

Thanks Sando! 👍👍👍

[@BossDao]

Very good tips, thanks!

[@MrMilanina]

Top content, thank you!!!

[@mordavian]

Can it carry a Broncolor 800S which is 7.9 lb.

[@ArtVideoProductions]

You’ll need a Bowens adapter for Broncolor

[@mordavian]

@@ArtVideoProductions yes firstly i need this but Siros light little bit heavy. Wondering if it can carry the light.

[@riOdariot]

Excellent

[@ecologicaltime]

you are clever. Your video was technically excellent.

[@ArtVideoProductions]

I’m glad you liked it. This channel also has a ton of brand new Godox lights. Be sure to check them out here! Thanks!

[@JosuGrimm]

Tks for the video man, seu sotaque é meio brasileiro, você é brasileiro? Grande abraço!

[@ArtVideoProductions]

De Brasileiro, só sobrou o sotaque 🤣

[@JosuGrimm]

@@ArtVideoProductions hahaha bah que legal! Obrigado pelo vídeo me ajudou muito. Vou treinar pra te ganhar na velocidade da montagem 🤠

[@ArtVideoProductions]

@@JosuGrimm seja MUITO bem vindo ao canal. Obrigado pelo carinho. Abraços.

[@jacobclaassens690]

Very thorough and informative, thank you!

[@lomeroger4101]

Great video! Are you Brazilian?

[@ArtVideoProductions]

Yes

[@lomeroger4101]

First of all, I would like to apologize to you if my question was a little bit weird. I did so because I’m also Brazilian, but I left my home country when I was 19 years old to live in Canada, where I studied photography at Toronto University. Now I’m 47, and I live in Japan, where I have a photo studio and an English school for ten years already. I am thrilled to see a fellow Brazilian succeeding in the photography field, especially in a foreign country. I liked your channel. Keep up the excellent work.

[@ArtVideoProductions]

@@lomeroger4101 hey, no problem. A lot of people ask me if I’m Brazilian. Proud to be. Looks like you’re doing great too!!

[@86farica]

Thank you so much

[@fernyology]

Nice video

[@fvisbisque]

Man, are you brazilian?

[@ArtVideoProductions]

Oi primo! Tamos aí!

[@fvisbisque]

@@ArtVideoProductions Uhulll... Novo inscrito! Vamos nos fortalecer.

[@lukegarcia9510]

@@fvisbisqueeu ia fazer a mesma pergunta, pelo sotaque hahah ótimo video!

[@SmashyMcGee]

13:30.... What is on bros feet?

[@ArtVideoProductions]

Let your imagination go wild. You’ll figure out.

[@KT-hw1nc]

❤

[@wedoluxury]

sweet =)

[@EugeneMaynard]

👍🏾🙏🏾