Going Kizer Krazy with Boat Loads Of Kizer Knives

LOTS OF KIZER KNIVES TODAY, WE ARE UNBOXING A BUNCH OF NEW KIZER DESIGNS AND SOME OLDER ONES WITH NEW MATERIALS. SOME OF WHICH ARE ICONIC KIZER KNIVES THAT HAVE BEEN VERY POPULAR NOW WITH DIFFERENT STEELS AND HANDLE MATERIALS.
KIZER KNIVES shrsl.com/47agj
RECOMMEND BELOW.........
NEEVE KNIFE CO APPAREL neeveknifeco.com/collections/...
NEEVEKNIFECO neeveknifeco.com/
SELL AND BUY KNIVES get 10% off with code ( NEEVES10 ) with their retail store
BLADEBINGE bladebinge.com/?referrer=NEEV...
USA MARKET BONDED DIAMOND & CBN STONES shrsl.com/4kow7
HAPSTONE SHARPENING SUPPLIES bit.ly/3Q4Okfw
JOIN OUR MEMBERSHIP TO LEARN KNIFE
SHARPENING AND MORE
/ @neevesknives
NEEVESKNIVES STORE & SHARPENING SUPPLIES
www.amazon.com/shop/neevesknives
BLADE HQ shrsl.com/3qffz
GP KNIVES shareasale.com/r.cfm?b=631534...
SENCUT USE CODE (NEEVES15) 15% off shrsl.com/4hdj5
CIVIVI USE CODE (NEEVES15) 15% off shrsl.com/4aifk
WE KNIFE CO USE CODE (NEEVES15) 15% off shrsl.com/4dvch
AURORA KNIVES
aurorablade.com/NEEVEKNIVES
RIVERS EDGE CUTLERY riversedgecutlery.com/new-arr...
EKNIVES eknives.com/?aff=4
ARTISAN KNIVES shrsl.com/43mr4
KIZER KNIVES shrsl.com/47agj
KUNWU KNIVES kunwuknives.com/?aff=9
KANSEPT KNIVES shrsl.com/47agm
KUBEY KNIVES ( JN50YJ ) Discount: 50% off D2 Knives:
Code for All Products Discount: 20% OFF ( JN20YJ ) kubeyknife.com/?sca_ref=35002...
KATSU KNIVES katsuknife.com/?sca_ref=28143...
POLISH CUSTOM KNIVES shrsl.com/47s3x
URBAN EDC SUPPLY urbanedcsupply.com/?rfsn=5911...
DEFCON TACTICAL KNIVES www.defcon-usa.com/shop?ref=n...
BLADE OPS STORE bladeops.com/?aff=26
KNIVES SHIP FREE shrsl.com/3y136
DIVO collabs.shop/vt1hb6
KAVISO www.kaviso.com/?aff=3
KUBEY KNIVES kubeyknife.com/?sca_ref=53168...
VOSTEED KNIVES shrsl.com/4hdir
QSP KNIVES www.qspknife.com/?sca_ref=406...
GIANT MOUSE for free shipping use code (NEEVESKNIVES) at checkout
www.giantmouse.com/neevesknives
ORIGINAL GOAT
SAVE 15% USING MY AFFILIATE LINK
originalgoat.com/?ref=NEEVES
OR USE 15% DISCOUNT CODE (NEEVES)
REMETTE shrsl.com/4iaut
TKELL KNIVES tkellknives.com/NEEVESKNIVES
TACTILE KNIFE CO SITE tactileknife-co.myshopify.com...
BESTECH KNIVES 5% DISCOUNT WITH CODE NEEVE www.bestechknives.com/vqcpvw
NITECORE LIGHTS, POWER BANKS, AND MUCH MORE shrsl.com/4irog
SHANZU KNIVES www.shanzuchef.com/?ref=pqlejjpp
TSPROF SHARPENERS tsprof.us/?ref=14n2b371
TOOLS FOR GENTS toolsforgents.com?tfg=7972
KPL HEAVY AND ORIGINAL amzn.to/3kmN8DT
KPL MAINTENANCE KIT amzn.to/37OwKJJ
KNIFE AND EDC DISPLAY CHESTS
HOLME AND HATFIELD get 20% off using link or with NEEVESKNIVES code
www.holmeandhadfield.com/disc...
VEVOR WORK BENCH amzn.to/4bfPXiI
DIGITAL MICROSCOPE TOMLOV : www.amazon.com/dp/B0CMZ3MZ8J?...
STUDIO EQUIPMENT :
EWIN RACING CHAIRS save an extra 30% with code (NEEVES)
shrsl.com/4delt
RING LIGHT amzn.to/43YaipV
CAMERA amzn.to/3uiNIv3
LIGHTING amzn.to/3SBhdQM
TRIPOD amzn.to/3HRextl
FILMING MICROPHONES amzn.to/3SPR4is
LIVE MICROPHONE amzn.to/42AQJTP
ALL LINKS AVAILABLE ABOVE ARE AFFILIATE LINKS FOR COMMISSION
To donate, contact or just have some good 'ol knife talk with the Neeve's DM us on Instagram @neevesknives
LINK: neevesknives?ig...
TIKTOK : TIKTOK : / neevesknive
Contact us by email at [e-mail]
Instagram: Neeves Knives
NeevesKnives Paypal: [e-mail]
#FoldingKnifeDesign, #PocketKnife, #KnifeMaking, #DIYKnife, #BladeCraft, #KnifeDesign, #edccommunity #ArtisanCrafts, #CraftingSkills, #HandmadeKnife, #knifesmith #edccommunity #EDC #BestechSpearPhisher #KnifeReview #EverydayCarry #ToddKnifeAndTool #KnifeCommunity #BladeTech #HighPerformanceKnives

[@lonetrader1]

Kizer has been Killin the knife game with absolute BANGERS!!! They've quickly become one of my favorite brands! 😊

[@kylekarcher]

The militaw is such a good looking knife.

[@chasewells5464]

I think it’s their best looking one yet

[@Philippians--vz1mi]

The Grouper is easily the best value budget EDC at this time, I own one & I love it, the Nitro V is super slicey & I love the blade shape it cuts like no other cheaper blade on the market!! Only issue is Azo's placement of the thumb stud, I removed mine & added a Kwik thumb stud 7mm back from Azo's placement & now it deploys with such ease it's an absolute joy, hands down the best budget EDC at the moment.

[@mediicice5862]

I would put an argument for the Civivi vision too!

[@proraptor4146]

Its just wayyyy too ugly for me

[@katanasmith]

You and stassa are Mt favorite reviews. I trust your opinions and reviews. Like to see you do some more budget bottom of the barrel reviews. There are some amazing knives available for under 20 dollars. I am pocket testing a Walmart Ozark trails knife right now which for the under 7 dollar price point and 4cr steel is amazing. Heat treatment so important. 4 cr that micro chips when abused on a steel can rather than rolling. Amazing knife for less than 10 dollars.

[@bigjim55able]

Kizer's slogan is "Action for you!". They ain't kidding.

[@krazy_roach1698]

Love my DLC Purple Fatcarbon Militaw. The gold/bronze looks cool... but i hope someone makes aftermarket scale inserts. Or Kizer offer just different colors/materials like flytanium arcade.

[@gaberoo9099]

Wow...nicest gemini version I've seen so far...very cool that ultem is giving such a grippy scale. Nice.

[@Tatterdsoul]

That Grouper is so cake. Lil Muk in there. Great tool. Thank

[@TMthumper]

Performs so well i really enjoy using mine

[@Man_Ray78]

Kizer is the only company I buy knifes from, nearly every month. It's very easy to get hooked on their offerings and the service and community around it has improved so much just last year or so. I mean, they don't have many models over 200 dollars so that must attract the normies oput there.

[@speedy_g_345]

I want a militaw. Classy looking.

[@Cid_1]

I would love to see Kizer do more 4V and run in a bit higher (62-64HRC), same with their small EDC fixies in 3V at 58-60HRC. On such small knives, 3V should be in the 63HRC range preferably. Would also be awesome to see them release their fixed blades in Nitro V (since they got that) or 14C28N, Nobody wants to see D2 on a larger fixed blade when there are so many better tool steels. I know they rereleased the fixed blade with the ring in 154CM which is a good start.

[@phdcinnabar5754]

💯 percent agree with everything you said, and 4v is one of my favorite steels, if you get the hrc right it takes such a crisp edge, easier to sharpen that allot of other knives in the low to mid 60s range and it always keeps a toothy edge even after a little stropping, and with just a little less strength than 3v but with better edge retention than 3v I just love it as a work steel, I use my Spyderco pm2 in cpm 4v for everything,

[@gaberoo9099]

Spot on! Their 10V seems also soft (try as I might, can't get a decent edge on it). Agree with the 3v and 4v comments (they could and should be done harder).

[@SoarLooser]

Dude I’m drooling over that Kizer grouper. That’s one nice looking blade. I love the sound of it. It’s going on my list. I purchased the drop bear when you posted the 30% off notice. That detent is definitely something to write home about. Thanks for dropping this review dude.

[@garyfrombuffalo]

Kizer is my favorite knife company

[@aaronfisher9776]

Got to mention that they're doing their nitro v 62 HRC.non coated

[@gaberoo9099]

Good to hear...is the rockwell hardness on their models posted on their website? I looked at some retailers (WMK for example) and did not see that stat on their info (on the models I looked at). Thanks.

[@toddcarr.]

Kizer is killing it with all the new models, something for everyone at all different price points. The Militaw is really catching my eye currently with a couple of fixed Blades like the Smolt in 3v as well. Thanks for the great vid and keep making sharp things fun and enjoyable.

[@gaberoo9099]

Love that mini-grouper (yes! just was going to say it reminds me of a shilin cutter).

[@alexandregraulle607]

The Oknife Rubato 4, S35VN steel, have perfect proportion for me !! ^^

[@alexandregraulle607]

Realy, Civivi and Kizer are my favorite Chinese knives !! ^^ But i see the Ontario Forest, at 15 box !! Amazing. Even it's not a good steel ...

[@gaberoo9099]

Those circular micromilling on scales looks really grippy...this should be used more often in micarta, G10, ultem to provide better grip. Cool.

[@alexandregraulle607]

I like very much the design of Kizer. And it's us, who make the Oknifes !! ^^

[@keithsargent6963]

I just got an Assassin, it’s a great knife. And I also bought a “Fighter”.

[@chrisjosekuehl]

I love the original militaw, I’ve heard the dlc makes the action extremely smooth

[@JSA-SL]

Hope one day kizer make the Brat on micarta

[@jasonbeecher509]

The kovox looks nice. Very good little fixed blade

[@chevyman6999]

Very awesome! I think the new Dogfish seems really cool!

[@rcjoe406]

I want everything you showed

[@Oneoneone111One]

I’ve become a huge fan of Kizer lately. Excited to see where they go next

[@mediicice5862]

Imo they are the best knife brand for price

[@BrandonGavin_EDC]

I’m waiting for the 80’s camo carbon militaw

[@alexandregraulle607]

But i like the leaf blades to ..! ^^

[@user-Bladewalker]

Nice group of knives . Appreciate the share brother. Kizer is killing it and I am here for it 😂 God speed my man

[@natehoover5266]

Man I was hoping they would do a plain ti Huldra. I love the design but don't love cf. Maybe I'll just go with the black one

[@dannyjudson932]

Nice Box Cutter you got there

[@malcolmholt2010]

in the background 😂😂😂

[@Tatterdsoul]

Pt 2…Kizer knows how to :::: up the Cormorant handles…been doing it since the dawning. A “Toy” look.

[@airadaimagery692]

I know I’m like one of the only hunters that comes here, but that integral looks like a good hunting/skinner. The nice guy would work good as a skinner as well. And I didn’t think that you were going to show us anything that could go up against my Varatas, as far as EDC, but that Militaw is pretty sweet. Kizer definitely got it going on.

[@Tatterdsoul]

I know..that Militaw is so good. Cheers

[@StonesAndStrops79YT]

Im happy to be a rockstead

[@Seraph777Iscah]

I really don’t know why spyderco never ran with the button compression lock. The biggest problem with button lock is the strength but the compression lock fixes that problem

[@tonyballou]

I dig the Tetris lol I can imagine how nice a fully colored set of Tetris scales could look

[@EugeneSmedlund]

It was like a Kizer commercial. The only new thing that I noticed was the bow tie. Sure, there was different scales on old knives. You working for Kizer?

[@1ecobeast7]

I need that militaw but i sure hope they fixed the clips on the new ones

[@jhall_edc]

Might have to grab that new militaw

[@thesafezone3833]

Any suggestions on where to get an edc pocket knife with snakewood scales? I can't find anything decent.

[@mattdenison658]

That Cormorant totally looks like Tetris.

[@Aa-ron22]

The militaw and momo are on my list of knives to get next

[@StonesAndStrops79YT]

Hey Jared just wondering why is the bevel of my knife bevel so small at the heel and wide at the tip it really bothers me its mostly a problem on the side where the spine faces me I don't know if it's a technique problem???

[@lando8913]

The cormorant looks a bit like your WE knife actually 😄 No offense lol. Can't wait to see the revisions. I'm hoping I'm able to save up and snag the misdemeanor. 🤞

[@chrisjosekuehl]

I how they make more Kizer Escorts with the micarta scales, I’ve been looking everywhere for one.

[@TheGerardo136]

18:10 I think this is very possible, I front flipped my militaw saw hard once, that I felt the blade bounce while it engaged. Idk if it would’ve disengaged but it seems like it could just from the force the deployment methods allow 😂 ever since then I chilled with deploying it so hard. Don’t want that sucker biting my one day

[@Cid_1]

24:00 All the holes 🤣

[@zero_tolerance245]

Jared what do you think about the Kizer Bow Tie, is it good for self defense?

[@gainesdaughdrill7813]

I’m very interested in the new Brat! Anybody know when it drops? I can’t find anything different on Kizers website.

[@StoneHands25]

Jared will you carry stuff in the same pocket as your knife pocket?

[@Lowridah51]

I don't really understand english but what this knife (neck knife at 23:08 )? Bow Tie ?

[@miller8638]

I wanna know when the gemini nitro v comes out

[@JedHead3409]

Ugh another Militaw…. Kizer take my money now!!! Hands down my favorite knife in my collection. Sorry wallet, gonna need this version too now

[@TMthumper]

Yes i just got the purple haze one today n i didnt know they were coming out with a gold one. Good thing i really love purple💜🖤

[@JedHead3409]

I just ordered in today too! The days where I could afford the purple never seemed to line up with times they were in stock….. I too today! Can’t wait to finally get my hands on it, cause the original is my favorite knife and I know I’m gonna like the purple better. Gotta have them all! At least I’m collecting Militaw instead of Shirogorov’s or Herman’s lol. I would love to, but for now I would rather get 6+ Militaws vs. one of those

[@JedHead3409]

@@TMthumper the gold looks too good not to get too. I don’t even care that it’s the exact same knife, because they will look so good altogether in my display case. I just got married, so I really hope they don’t come out with more for a little while in order to give my bank account a chance to recover lol

[@TMthumper]

@JedHead3409 As long as it brings us joy, it shouldn't matter. We should get all the knives we can..but for me after this one, im done buying any for a while. I gotta save for a car 😆 my most expensive is a Kunwu Pulsar diamond texture Ti

[@JedHead3409]

@@TMthumper ​​⁠agreed! And it brings me lots of joy. Just waiting on my Spyderco Stretch 2 XL K390 preorder to process, and a custom EDC fixie from Gersh Blades that I commissioned. After that, taking a break….. til the gold Militaw comes out lol. Then another break…. Til the 80’s Camo Carbon Militaw from Blade Show comes out. Ugh I have a problem lol😊 Speaking of Kunwu, waiting for the “Stiffy P” I preordered to arrive. Never tried Vanadis 8 steel, but seems to be similar to K390. I love how Kunwu is venturing into some lesser used steels, and doing a great job at it! I wish all Chinese OEMs did that. I gotta get me some more Kunwus

[@ronfry5851]

Come on Kaiser you could have made that little fixed blade in nitro v😢

[@VanceJohnston]

Dont find anything on Kizer River Bank. Is it new?? Any clues??

[@topkinginer]

Let's go Neeves, your the man!

[@beeferbaron]

Militaw!!!

[@cemetarygates2800]

Serious question........"Propper heat treat" Magnacut steel to say...63 to 64...Does it cost more to hit those kinds of #'s?

[@DaveM-jf7ge]

Yes

[@retardno002]

Don't bother too much with the heat treatment, at lower HRCs I feel like MagnaCut is just stainless 3V which is great in my book. Depends what you use it for I guess, with folders you don't have much use for the extra toughness.

[@bamabladez]

I dont see the new brat on the site?? nor the militaw new model which im sure is sold out.

[@sgt.snake0177]

JARED I NEED HELP. I just got the purple CF militaw on Saturday. But I am seriously considering exchanging it for the gold CF one. Does the gold show up well in person and which do you prefer?

[@NeevesKnives]

I like both and yes it looks great in person

[@sgt.snake0177]

@@NeevesKnives thanks for the help! Is there an ETA when the Gold version drops?

[@Mike-uv5vi]

I agree that the Cormorant is ugly, but the best thing about it being said here is that I heard a different reviewer say that the Misdemeanor looks like the Cormorant. I think the Misdemeanor looks significantly better.

[@RedRider566]

I can only find that blade militaw in blk/purple inlay , NO THX If they had the gold I'd buy it ,,,, I don't like purple

[@sneaksgeeks9008]

When does that Militaw drop?

[@MohamedMeringue1195]

You didn't mention the Varatas 😁

[@NeevesKnives]

These are all new models

[@drewrinker2071]

How did you get a gold one ?? Lol I thought I was lucky to get a purple one brother

[@TheDemocultis]

Hey Jared! I've been following you for just a short while but I've already gotten better with my sharpening! I'm disabled and on a fixed budget so I doubt I could ever afford all the premium stuff you showcase, even though I do drool over them. My monthly knife budget is around 100 dollars. Are there any models that have that premium look and feel but in that price range?

[@cliffsun]

He has a history of making videos showcasing amazing budget knives in roughly the $30-100 range. If you go to the channel main page and search "budget" or "budget knives" they should show up.

[@user-Bladewalker]

I'm not a fan of tetris that's military though is a chefs kiss.

[@tomquirin4231]

brotha jman/jerad, great great selection of blades there brotha , 1 million % cool , love your vids n content as always , will forever support you , you keep em coming brotha , talk soon > tom !

[@wasnt_it]

annoying that the weird hole knife got a kydex sheath and not the mini harpoon

[@ozzyfranf]

The thing is when Forged In Fire came out we had alot of people who probably didn't have the ability or the means to make a decent knife all of a sudden they think they are blacksmithes/ bladesmiths. There's so much misinformation about knifemaking it's unreal. I've made a few knives in my day and what I'm seeing these days is unacceptable. For example making knives out of files. In my opinion you need to anneal the file before you start the actual knife making process . Some people think since it's already hard you just shape the knife and throw a handle on it. And there's a saying "It's hard as glass" which means if you drop it it will probably shatter. Or making railroad spike knives although they may look cool the carbon content in the spike isn't enough to make a knife hard enough for a decent edge. Or not soldering the finger guard to the blade. The solder helps keeping moisture away from the tang which in turn stops rust. I have more examples but I'm sure you get the idea.

[@lonetrader1]

WHAT IN THE H@!! AM I HEARING IN THE BACKGROUND?!?

[@jkn2k]

Bang?😢

[@speedy_g_345]

Definitely Tetris. I don’t like the looks either.

[@petertwiss356]

Ehhh

[@BTeezy82]

I really don't understand why people love the cormorant...it's very unappealing imo

[@RABBIT-420]

Funny that you don't like the comerant because it's similar to your misdemeanor. Granted the misdemeanor is way better. But similar

[@protomon]

One thing I don't like about Kizer is the painted black blades. Really wish they did DLC or blackwash, instead. Seeing a painted blade is just cringe!

[@lundysden6781]

Dude, I like you and the ch. but I have to say I think you have been putting out too much content. Its like, flooding the mind with asian knives. Like 15 a day. Why? you dont need to it this way. Focus on small companies or U.S. companies, no one likes too many choices. It makes people just walk out of the store. Scale down man. Tell some of these guys to take a hike. For example Spyderco alone has models that were done way back that deserve the reward.

[@acid6urns]

what hrc is kizer running the nitro v at? i wish companies using nitro v would run it to 62-63 HRC, it still stays super tough but gets a HUUUUGE boost in edge stability and edge retention.

[@KevinIngram-om5jh]

STOP! Flipping the knife over, over, over, over and over again. Slow down!! Let us see the knife. Are you just trying to impress us on your knife flipping?? Stop! Please!

[@elde667]

Apparently he can’t control himself. 😮

[@cliffsun]

I don't know what you're complaining about. He talks about the knife sufficiently and moves the knife around to show every significant feature. Note that he mentions all the knives are linked in the description if you want a closer look. It's a video, not a slideshow, I don't know why Jerad would spend half an hour talking to a knife sitting on his cutting board.