Making a crawler from a WPL C24 RTR Part II/ Final

[@EddieHickeynyc]

who could possibly dislike this???? Great Job Pal!!!!!

[@androjeff]

You're seriously the best WPL modifier on the interwebs!

[@peterhamilton2595]

you can't go past your builds such nice work and a lot of time must go in to them

[@no1fixer958]

Love all the vids on WPL models,the sky is the limit with these,cheers man

[@rcjan5690]

Woooow..just fantastic what you do...big thumbs up..

[@danielemulazzi7309]

SPETTACOLAREEEEE !!!! Veramente uno spettacolo! !...troppo bello questo video !! in dieci minuti me lo sono guardato già 3 volte. La scenografia è stupenda ! Questo è un lavoro da professionisti! !....Goncalo sei da premiare!!!...complimenti belli i cerchioni fatti con la stampante 3d...voglio imparare anch'io a usarla! !! GRANDE Goncalo !!!

[@grandprismatic]

Beautiful work Goncalo.

[@GoncaloQuinas]

Big thanks for the support. Have to make one of this in a 1/10 scale.

[@localsms]

Fantastic build mate! changed the game!!

[@rcfundyer5739]

Very cool build great work love your videos

[@robertbritton4700]

Awesome build

[@rctrophyr79rus41]

Hello Friend!!! Listen, you're just a magician !!! I am adored! You are just super!!!!

[@flashhobbies]

Truck looks amazing! I like the scale stage also

[@sparkyclark8267]

Very Amazing I would love to buy a set of wheels and the roll cage.

[@RevolutionX]

Awesome work, you really make me want to pick one up now.

[@wjtss]

Hi, great videos!! Do you think I can mount the wpl b-24 body on a wpl-c24 chasis? I really like the b-24 body, but suspension in C-24 is much better than in b-24.

[@scorpioride]

I love it so much. Thanks for this video

[@STEVOD313]

Good stuff! All looks great!

[@satorrotas]

Excellent , very good work !! Great look !!

[@GoncaloQuinas]

Big thanks, now I’m on a need of a garage like yours.... hehehe

[@PedroSilva-yv5df]

Tá espetacular a c24! Só uma dúvida? Como é que fizeste a ligação dos motores? Que tenho uma caixa igual na c14 mas os motores não trabalham igual qdo está a subir!

[@BLACKBOX1004]

One of the most impressive images I've ever seen This is the video.❤

[@tilingtrans]

Awesome work mate very handy. Love your Edits too. Might have to try this with mine

[@moonmanmigz]

Amazing build man, It looks good.

[@modelnutty6503]

it'd be great if there were longer shock bodies, longer rods, longer softer shock springs. an 1/8" more travel at each corner (positive+negative both) can give up to 1/2" more twist (articulation) total end to end, likewise for 3/16" to flex up to 3/4" more. dropping the center motor gearbox down 1/4 or 3/8" is simple enough (to help un-kink U-joints). lifting 1/8" or 3/16", and adding that much more travel could get these to be even more capable. it'd be a really cool kit, "super shocks" and "trans drop" (sheet metal plates).

[@GoncaloQuinas]

Yes, sure it will be a awesome crawler. Maybe I will think of that in a 1/10 scale. Hehehe

[@modelnutty6503]

waiting on Tamiya Grasshopper screw bag for the "shock" bolts, are a bit longer and may be enough combined with softer springs, or clip the stock springs one turn from both ends "to split the difference". the Grasshopper shafts may be TOO long and sit too tall, but they'd also allow opposite wheel to flop down lower, for more twist overall. I'll see when they arrive whether they'll work and if they need tubing spacers inside the shock bodies (if travel+flop are WAY too much).

[@riskybizkuts5949]

@@modelnutty6503 you sound like you know your stuff ! I'm about to pick a few of these up for me and my old lady. We drive real full size trucks (pre-runner and also a crawler) so while they are in down time I'm be nerding out on these big time lol. any tips/tricks or mods, week points on these that i should know about? Thanks in advance.

[@marcusrcs1885]

Upgrade the suspension and put some weighted parts such as a mettle bumper and some softer tires make it a crawler what you did was paint and put a twin moter kit on it with some light 3d printed parts but if going for looks I'll give it a 100%

[@UnboxingToysbyEstadodAlma]

Muito fixe estas modificações! A impressora 3D dá uma liberdade à criatividade enorme. Parabéns por mais uma criação fantástica!

[@joaoaraujo8081]

Amazing work, bro.! Keep ahead!

[@Del350K4]

Thumbs up for a glorious build : )

[@Kpastrsn]

Nice work

[@TUGASCALERS]

Top notch video and of course wonderful #tinytruck!!!

[@GoncaloQuinas]

Big thanks . This one is on the #supertinytruck hehehe

[@10k_rpm]

It is very beautiful!! I want to get that

[@faiscas1]

Top Gonçalo. Já agora, essas preguiças? fez em 3D ou comprou?

[@josephsloppy6750]

Awesome detail👍👍 . thies wpl kits seam to be very cool. After watching your b16 kit build . i had to orfer one. Thanks for the videos 👍👍

[@winloc3079]

Awesome man great video

[@ASMR_PokéPulls]

So how much does it cost a full build like this?

[@tommywagner96]

Hi! I'm trying to buy your rocksliders from pinshape but the website wont allow it. is there any way you can send them to me?

[@wildankholidulfirdaus1178]

Inspired me so much

[@dirtydsrc]

Awesome truggy. Your videography is really good. Great vid bud.

[@regissimeoni3283]

Bonjour Super exellent travail 👍 👍 👍 👋

[@erichunter8646]

Try to see if you can make bigger rims for the trucks

[@modelnutty6503]

5 mm to 12 mm adapters would be pretty nice!

[@Dave-us6yu]

Very Nice!! What 3D printer is that? Subscribed!

[@pablofernandezasensio4734]

Un coche fantástico. Magnífico trabajo algún dia montaré el mio propio con tus videos. Saludos

[@sophie28ize]

Your the Best!!! Love your work!!!

[@GoncaloQuinas]

A huge thanks man, super pleased with your comment

[@valdirdadasilvaalves]

Amazing Gonçalo.

[@alvarocarrascogargoles6233]

Beautefull car and good work🤔😉

[@year1camaro]

Looks good! I hate to nit pick but the radiator is sitting way to high. A 1:1 wouldn't put it completely to the top of the roll bar in the event of a roll over. Also where are the radiator hoses and fan wires!!!! lol .

[@GoncaloQuinas]

Twisted Link Fabrications is because of the battery access, that’s why it sits so high and this is the new technology on the roll cage that takes all the wire and tubing inside to protect from damaged. Hehehehhe

[@rcqs7024]

Good job

[@rcflashcars]

cool vid! congrats for the views number! big like! 👍👍👍

[@rcpete7055]

Hey good looking 😊👍 have ordered similar bodyshell for my scx10 am planing on painting this Toyota style 😊😊 thanks..

[@eskimojoe6564]

Wow you turned a $40 rc into a $800 one beautiful truck and build.

[@stynnty]

is it worth tuning WPL B-1, or buy Wltoys 12428???

[@michaellamotte6449]

Nice truck

[@tommymontalvo3772]

Super bien buen trabajo como siempre

[@SDMountainMan]

That thing is awesome

[@sean7680]

Can you release the 3D print models?

[@leandroserrano8258]

Boas amigo. Eras capaz de me enviar mensagem a dizer como meter os piscas a funcionar no c24? Estou a pensar comprar um. O que achas deles, pros e contras? Vou comprar um em 2a mão com 2 motores suplentes e mais 2 conjuntos de transmissões por 40€ com pesos nas rodas e para-choques em ferro e assim

[@stevemattox6694]

Very cool

[@sarahthewerewolf9334]

Greit job Goncalo Qunas

[@nunodias3331]

Muito fixe mesmo, experiencia e uma impressora 3d fazem milagres...

[@r1houston713]

So sick

[@KibsRC]

Yeah! 👍😃👍 That’s awesome man, nice job brother. 👍😃👍

[@STEVOD313]

Wayne Kibler's RC Adventures this was what I was talking about, when I mentioned the things u can do with these things

[@KibsRC]

STEVO D 313 Oh yeah! 👍😃👍 Oh I know, I love it. 👍😃👍 That’s why I got the Gen7 and the Barrage because I love the scale stuff man. 👍😃👍

[@STEVOD313]

Wayne Kibler's RC Adventures well August is my last month that I’ll have to pay the powerchair bill n it’s mine, so that month I’ll be low on cash so wpl buildoff for next month

[@KibsRC]

STEVO D 313 Yeah! 👍😃👍 That sounds awesome. 👍😃👍

[@TA-kr1di]

Anybody know the song title?

[@Leonslockpad]

Awesome job my friend love the wheels wish you could get on the wheels for them if you don't have a 3D printer👍😊👍😊😎✌✌

[@aviancrux7239]

I got you homie

[@gamingfire6126]

Jenius

[@bryanbarnhart9782]

nice job

[@maddogrc7910]

Would love to win one if you do a giveaway. They are so cool.

[@thatsmyrc]

sweet video and nuber #1 8-)

[@GoncaloQuinas]

The fastest, thanks a lot for your awesome support

[@macrogarage190]

Nice

[@supastihl89]

Nice man. Jealous of your printer. I have to buy everything. Have you seen my build. I did a big lift. I can't put the big tires on without spacers I can't find. Thinking of cutting down some rims and making spacers for the monster truck tires.

[@modelnutty6503]

hehe, yup, I watched those vids. a little bit overboard on the lifting, it got a little top heavy unruly trying to side face the mud+grass. definitely a need for the 5 mm to 12 mm adapters! once the 3D printer file is created, there are places it can be taken to have them whipped up, or they could sell on eBay pretty quick.

[@supastihl89]

model nutty Yea my 5 yr old was driving. The wpls tend to be top heavy as everything on the bottom like Suspension are plastic. I'm actually ordering longer shocks. It will be better with the bigger tires.

[@modelnutty6503]

for as cheap as these (and parts) are, really thinking scratch built ultralight chassis for the WPL running gear, with focus on some real articulation and shortening wheelbase about an inch with offset N20 gear motors. without all the plastic weight and up so high it might actually crawl! also thinking 4WS, mounting 9g servos on the axles. I run 2 14500 (AA size) lithium ion cells (3.7v) series for 2S and saving weight, not as sensitive to over-discharge as LiPo is also a plus. also small enough to mount low about anywhere you want helps. I've done a few projects with CF arrow shaft and aluminum tubing, make the ends shapes mate, rough scuff nearby, CA in place then start lashing (all possible directions!) with sewing thread and CA. gets really REALLY strong about 1 to 1.5 mm thick, like "welded solid". hope ya see this reply, this build method ROCKS. for bending tubing slip a bit of cable inside so tubing doesn't kink, then (sometimes) fight to get the cable back out of the tubing. you can also use 1/8" and 5/16" cable and rubber (or shrink) tubing to make suspension links with built in spring+damping action without using any shocks (think "half a leaf spring" with ends mounted solid).

[@jasonsmithsrrcfun9259]

Awesome

[@MCsCreations]

Beautiful work, dude. Really fantastic result! 😀 One question... That 2 speed motor (which is a motor + a servo)... Does it fit in the WPL C14? Or only in the C24?

[@GoncaloQuinas]

Thanks a lot for the awesome support. Yes it will fit too, is suitable for all the cars. That give me the idea of showing that on the next video, on the 6x6

[@MCsCreations]

Goncalo Quinas Awesome! Thanks a lot! 😊 And don't worry, just keep the great work! 😉

[@inspireonex]

There are axles available that are COMPLETELY metal but you probably know this. They go out of stock alot and don't look very scale but just saying...

[@GoncaloQuinas]

Yes they are, but never test then just because of that, really not scale at all. HEHE

[@dodotheodore2111]

How much the price of the 2 speed motor?

[@modelnutty6503]

they're about 19 bucks in eBay, need 3ch transmitter to run with it.

[@sarahthewerewolf9334]

Hy gays im pres the lik for you

[@mariliacardoso2677]

Cool

[@brothersandsisterscobrothe9250]

Do a test drive on the offroad

[@EE-ho1hv]

Wow

[@sarahthewerewolf9334]

Awoooooooooooo🐺🐺

[@TorKungChannelRC111_Retrogames]

😊👍👍👍👍👍👍👍👍👍

[@WhenTheyGoLowWeGoHigh]

like a boss

[@lunameong1517]

nice😊

[@sarahthewerewolf9334]

🐺❤️❤️Goncalo Qunas

[@robertoartilesra]

Precioso

[@paulolanza5151]

Meu sonho era ter um desses sou fã do seu trabalho mais ou eu como ou eu compro um desses e fome eu n passo

[@gamingfire6126]

Wowwww

[@raulferreira8273]

Nice XD

[@eifelturm3]

My gears are always breaking :(

[@modelnutty6503]

this works! remove smaller bevel gear from diff input, use a paper punch on card stock (matchbook whatever) to make your spacers. put two to the inside, one to the outside, behind the plastic bushings, press the bushings in tight and CA in place. drill through the paper card stock, replace short shaft and bevel gear. the bushings further apart make the shaft wobble a lot less, the spacers put the gears in tighter contact with each other too. IF the mesh is too tight, make a paper gasket for the input shaft will back the smaller bevel gear out a tiny bit. get it right, the plastic gears can actually hold up pretty good!

[@sarahthewerewolf9334]

Do Yuo lik thes thrucks on motor storm Ps 4

[@HGSM86]

FREE STL files for this build just this weekend! Check it out: pinshape.com/users/363830-henrique-marques

[@sarahthewerewolf9334]

I lik monster thruck do Yuo can lt!

[@rcjijii3655]

Perfect(＾ｰ^)

[@hervinderpurewal4369]

so let me get this straight you spent all this money on upgrades and using a 3d printer because we all have one on a 30 quid piece of crap.you have way to much time on your hand.