Gonzo The 65 GMC Gets Some Love!!

[@jeepguy6645]

The short bus comment for Robbie was golden, It's nice that you guys can poke fun of each other and no hard feelings. Great content again.

[@michaelollivier9751]

It's truly amazing to watch you and your family and friends work together in harmony. I consider myself blessed and consider you blessed as well. Keep them coming and sharing your life with all of us. 😊😊

[@dougdean3134]

Your skills are amazing. Doing that quality of a paint job in marginal conditions is impressive

[@moparman1962]

We LOVE Gonzo videos...it is just one SWEET, special, rare truck, and a well deserved gift from Paul and Michelle to boot! Chad making the truck ever better, driving it and enjoying it is awesome!

[@joehanson2635]

Paul and his Family are Gifts from God The way they fooled you Working side by side with your boys. To bless you with a Beautiful short bed beautiful.

[@abunatkat]

Chad earned it it’s the least they could have done.

[@caseyrenner7024]

​@@abunatkatthey also helped his channel grow immensely and told people to check it out in many videos. Chad and Paul are both awesome

[@aaronmcconnell7358]

Chad went from adult to lil kid in about 2 seconds with that tape stuck to his finger .you gave me a good chuckle.

[@legend7ify]

.........I also, laughed so hard I nearly fell of my chair.

[@theburtseoni]

I really enjoyed the fabrication videos on Griz the Wrecker, but I'm glad to see you get back to poor old Gonzo! He was neglected for a spell, but now will get his day in the shop!

[@gregholmes3661]

OMG that little baby girl, she is so sweet. God blessed your family

[@kimetherington2252]

I love it! Gonzo is getting the attention it deserves! You guys do incredible work! Catch you on the next. ✌️ 😊

[@Kentucky921]

That’s a very beautiful grand daughter you have 🩷🩷

[@offroad6309]

Yes she is. Starting to come into the really fun age. Wait until she starts running around the shop!! Surprised they were using a fork instead of a spoon. I don't like people pushing a fork at me😮. Maybe because I would deserve getting stabbed 😅😅

[@Tanks-Link]

As a kid, I would never let my parents know or tell them that I was bored. I'm sure you understand. There was too much yardwork or other things that needed to be done to ever admit you were bored. Lol.😂😂

[@donaldhalls2189]

Gonzo is coming along great, good job on the doors, look great, thanks for sharing, all the best to you and your loved ones

[@OpieDogie]

Gonzo getting back on the road will be awesome.

[@JThelen1031]

Gonzo is way too awesome to sit around not being driven. I can see some folks from the Ward looking at you funny while driving it as loud as it was.

[@dalegereaux1863]

Good show ! I like that orange color. I had a Baja bug for 25 years that was painted that color. We could even see it in the dark ! 😉👍

[@gregb76]

Chad you all are doing great work on Gonzo. Nice job on painting Kendel doors and fenders.

[@davidbreaux5989]

Working on that fuel tank without any deck in the way is pretty nice.

[@shaneharrison4775]

Chad again you nailed it Character is who you truely are. Reputation is who the world sez you are and often the ones giving you a reputation haven't even opened their eyes to see the person you truely are. Gonzo is looking better qith the new tank and all cant wait to aee how well he runs with the ner system in it. And a air charge cooler qould be sweet.

[@Deanna-k4i]

Chad and his wiring prowess just never cease to amaze me hope some of his family inherit some of his patience 😊 ❤

[@motardmike]

The painting you did on Pauls wrecker is the nicest part.

[@danrussell3439]

I love the grocery bag comments sounds like $200.00 is a lot. The interaction between you and your wife always makes me smile. Great video as always.

[@michaeltablet8577]

I've said it many times so one more won't hurt. I love this channel ❤

[@Bearsdad]

Good to see gonzo getting some love.

[@trkdrvr24]

Gonzo gonna sound better and run better, thanks for the update 🇺🇸🇺🇸

[@daviddill4314]

4-15-24 wearing my Gonzo t-shirt while watching this. A man of many hats! Glad to see Gonzo get some love.

[@Tanks-Link]

11:13 I think the baby is just looking at the fuzzy microphone, what a cutie

[@Clawson_customs]

I know that Same feeling about not driving your truck. I just got the motor resembled and put back in my 1966 gmc been trying to get it broke in before the moab car show

[@vahallawinston]

LOVE todays end message.

[@scotthastings5794]

Those are cool trucks, all of them. I can't wait to see what you do for the bed. I bet it'll be fantastic. Hopefully some actuator opening for the fill cap. My boss did oak and stainless strips in his '55. It looks great. And to see Kaden's blazer come together, looking forward to it.

[@kenmurray4232]

Tyson working in full caffeine mode was cool. Followed later by Dusty but not as quick. Good video. Thanks for sharing

[@stephenpoe2037]

Lots of worthy projects going on ! Thanks for sharing !

[@joebesko5592]

lots of projects! Nice to see the wrecker in action and all the family, thanks as always for sharing

[@marvincarter870]

Lot's of work on upgrades for Gonzo. Looking good!

[@davidrollins4962]

Love the video. Educational and inspiring. The best part is the family is involved together even though your projects probably go far beyond visible. Watching from Ontario Canada.

[@offroad6309]

Been fun watching Corbin with the bearded guys. He really likes his uncle Tyson. Glad to see you getting away from the msd. Amazed after all the failures people have, some still buy them.

[@kpdvw]

11:00 what a Cutie Pie....!

[@Kristof-Kay]

this video drop just made my Monday a whole lot better, nice to see Tyson being Tyson and always at the wind up 😂 that orange paint looks amazing too, cant wait to Kadens Blazer back in the shop, as always thank you for sharing

[@charlesowens9784]

Thanks again for your time making the video watching from Reno NV

[@Zukgod1]

Always fun to watch the progression. Anxious to hear that run again. Let’s turbo the Jeep!!??

[@bagwell79]

Love watching you and your family work on stuff!

[@bryduhbikeguy]

While you were tearing the stuff off Gonzo, I was thinking Corbin needs a lawntractor/gocart project, and you went behind the truck and Tyler and he were working on 1. Unfortunately it's not a low rider for fun.Maybe soon. The truck should be even more fun to drive now.Great work,as always. The Blazer's going to look Awesome all done.Thank you for explaining the process, and why, while you were painting the parts.

[@MarkoMygun]

Love that truck ,thanks for the video.

[@kennethevangelista3039]

Very nice to c kendall hes been missing for along while

[@markchallancin1345]

I’m ready to see the Scout roll into the shop!

[@johnhart125]

Gonzo will be a nicer driving truck all around with this swap. Fuel tank is sweet. Stay safe

[@FenzoMac]

Great day in the shop!

[@andrewspray8036]

We watched you build a gas tank, buying one is definitely the way to go!!!😄

[@kevbev1524]

It's only fitting that GRIZZ toes Gonzo, the one of many times to come.❤🎉

[@rickdespain5363]

Really enjoy watching your videos. You really have a talent with wires and wiring drives me crazy

[@wackowacko8931]

If you are wondering about what to do for the bed floor in Gonzo, a metal bed floor from a 67-72 is "supposed" to be a bolt in swap in the 63-66 Chevy/GMC pickups. I haven't ever seen a bolt in swap actually bolt in anywhere when it comes to body panels, usually there is always some fitting to do. But it might be a solution to your problem, since you seem to have a few 67-72 parts trucks sitting around.lo rob parts from. If you are having trouble finding short bed to get a bed floor from, you might be able to shorten a long bed floor to fit. You would need to take a strip out of the front and a strip out of the back and weld them back together to get the long bed floor to work for you. The reason I suggest the metal bed floor is because a replacement wood bed floor and accompanying stainless steel hardware and strips can get expensive quick.

[@walterdodds3925]

Chad, I want to know where you're putting the mower deck on gonzo?. Remember, it's not how fast you mow, it's how well you mow fast,lol.

[@steveclark4291]

Thank you Chad and crew for the update on Gonzo ! Take care , stay safe and healthy !

[@SunShyne_Culture]

I'm learning, thanks a lot. Great job team.

[@danielr3167]

"It only hurts until the pain goes away" Gotta use that!

[@steveclark4291]

The pain just reminds you that you are still alive ! That's what my brother and I say !

[@TheOldaz1]

Be good to have some reliability with Gonzo. Paint came out nice.

[@guypehaim1080]

I would treat the rust on the underside of Gonz and paint it all to preserve it. Pressure wash it and use a rust converter/sealer on it. Also KBS makes a chassis rust prevention kit to spray up inside the frame rails.

[@ConstructionDemofun]

Music is great. Good job

[@mtnshooter2487]

No food is cheap now !

[@matts1972blazer]

I met your son a couple of weeks ago at one man band, I need to come say hi and i got something for Gonzo!

[@chadsfab]

Matt, thanks for stopping by!! Especially with the crazy construction detour you had. Loved seeing both yours and Marty's trucks. Looking forward to visiting again soon.

[@user-vx4ts8vm1l]

Our Pastor Chad

[@warrenjohnknight.9831]

Oh my goodness Mum, 200 dollars only gets me 3 bags and packaged toilet paper, and handy towls, mind you 8 litres of milk,included, that's just for my cat and I. 😊😊😊ha ha ha.

[@Krunkle78]

Love that truck! I get to do my knock sensors on my 06 Silverado yay lol Another great vid!! love watching you guys :)

[@Motormike2025]

I'm sorry. But I just love every video. You great folks share with this " CRAZY " WORLD 🌎. I live my life in a "POSITIVE " not . Every day. And share it with everyone I see . And I'm a mobile mechanic and welder. Fabricator to . And wiring specialist. Like you . Thanks again for sharing my friends.

[@ryanluzier7570]

I am not 100 percent sure when he put that valley pan back on I don't know if he left a rag in there I seen him pull a row of rags out and put the pan down and lift up the front and pull a rag out but never seen him pull a rag out of that back it's hard to tell with a time laps

[@chadsfab]

Thankfully no rags left inside 🥳

[@joshpitsch8570]

It only hurts till the pain goes away 😂

[@kevinfoley7704]

Great video.

[@chadsfab]

Thanks!

[@Motormike2025]

Love that truck, too.

[@coltonupchurch4368]

I got a 63 short bed iam working on with a 454

[@jaybird4095]

Nice work. I have a wiring question. How do you splice a wire to go in two directions? Example turn signals. Thanks again.

[@Patrick.Weightman]

What a damn good lookin truck

[@RanaJi-hi3hd]

Crusty was a Fraudian slip by Chad.., Love the gang...keep em coming.

[@pgg0024]

Robby skillz!!!

[@dongeiger4500]

Unfortunately you are totally correct $200.00 does not buy that much groceries any more. So bosting that you can get $200.00 in your truck is not that impressive.

[@doug9418]

I admire you Chad, wish I had taken better care of myself. I then could be able to work on my own vehicle, but with age I guess we all have to find our limits, maybe next hit about four years ago, and now at sixty two. (To many Dr's with bad news.)

[@geroldk.3230]

i love this car, it´s so cool !

[@patrickb5656]

If you and all the other local fab KZbinrs had a club, "Rip, Slash, Tear" would be your motto.

[@noonehere1793]

$200.00 in groceries in kalifornee is 3 loafs of bread, 1 gallon of milk, a large peanut butter and some cat food sandwich spread! 🤔😜😁

[@gregstarkjohann6856]

gonzo is great love that year 64-66 gmc,chevy I have a 64 c10 what tank did you end up with and how many gallons?.cant wait to hear gonzo run again

[@jasonbrogdon8841]

It’s never JUST 👍👍👍👍🙏

[@johnfitzpatrick2469]

G,day Chad and family from Sydney Australia. My current hobby of electronics is fun and challenging (I understand the importance of wire size for volts and amps AC and DC) complete circuits and connections. I'm buying cheap PCBs from China, some work some don't. I keep telling myself "don't touch the current" Second thought is insulated" ✝️💅

[@Ralph94967]

CHAD a bet your kinda happy that their aint no rush On Gonzo

[@flyingmachinecustomparts8227]

Good deal I'll watch this later after work.

[@kevinkobayashi]

are you planning adding some metal so you do actual grocery shopping minus the "holes"

[@chadsfab]

Doing the bed is absolutely in the plans 😁

[@hoangpham4468]

Big turbo w/o intercool ????

[@duane4972]

Hydro assist brakes ?

[@huskiesgo5944]

Should have replaced the vacuum booster with a hydro boost unit.

[@haroldphipps3457]

I was figuring that is what they did, but I was wrong.

[@robertjones3007]

Chad, What did you use to eliminate the booster??? what master and rod???

[@ToddKesler]

Go go Gonzo😮

[@wesgraham9588]

👍😊

[@DennisMcGrew]

great as always like the truck

[@markkcurrier9030]

That truck belongs in Tennessee Big Orange Country Go Vols

[@tomstepanowicz6191]

"Sniper" "Terminator" Chad, what are you building?

[@heidiayers2124]

❤ the channel 😊

[@scottcobb4966]

👍

[@ElwoodHarpazo]

Said the passive aggressive. 😂😂😂😂😂😂

[@bruceaugustine6486]

I know that you mean dewax and degrease because paint won't stick to wax and or grease.

[@jerryscott253]

How many do yall have mr.chad

[@chadsfab]

We have 5 boys and one granddaughter 😁

[@chocotaco8929]

Great video as usual. music names plz

[@andrewcarnes1726]

Robby on the short bus 😂😂😂😂