Time For Gonzo To Run Again!!

[@larrygarcia5918]

Someone keep that lady out of the shop!!

[@chadsfab]

I'm never happier than when Stacie wants to join me doing what I love. You don't have to come into my shop 😉

[@stanstenson8168]

Pin of shame.

[@Wootangtw]

@@chadsfabI think it’s good the lady’s want to be with their men when they are working on something.. plus learning something is always good …

[@wiresmith2398]

@@chadsfab I can't even begin to understand what's going on in there, Stacie is an absolute treasure and always makes the shop a better place!

[@walkingwithdogs8547]

If you don't like it, go watch something else.😅😊

[@Kentucky921]

Stacy talks about how heavy that head is then picks it up with 2 fingers, no wonder Chad is so calm, Stacy would bench press him 😂😂😂

[@gregholmes3661]

Yeah I noticed that

[@MarkWilliams-lf5tc]

Congratulations on 100k subscribers. Your family deserves it.

[@scotthastings5794]

Chad's smile at the end is awesome. Here's to Gonzo bringing many more smiles to us all as it keeps getting better.

[@jamessmith7691]

Chad's comedy corner. Great channel every time. I never laughed so hard as when you towed the wrecker home. The new camera lady is good with not having a problem getting dirty.

[@bradleymadosh911]

Good to see the Ladys taking the 5.3 apart and not worried about getting greasy 😂. They are strong also see them grab the cylinder Head with one hand 😂

[@kenmurray4232]

Nice to hear Gonzo running again. Good startup doesn't happen all the time. Stacey is definitely a keeper. Any lady that has the curiosity about heads & then take them off is good in book. The Mike Rowe quote is so very true. Thanks for sharing

[@troysgarage]

You guys are so good at this, you aren't even excited when a motor fires up for the first time. I'm like throwing high fives and huge smile on my face when a motor fires up. I got a LONG way to go to get to Chad's Fab level of confidence! hahaha

[@dirtclod5834]

You all brighten my day with allthe banter, humor and free wisdom! #BlessUp

[@Kickinpony66]

@32:44... If it smells like chicken, Chad is burning himself! @36:12... Ahh, my eyes!!! Manfred Mann had a song about being Blinded by the Light!

[@MaxsGarajMahal]

Foresee a new channel in the near future: Stacie's Demolition and Destruction. We break'em no matter how large or how small. We break'em all. As an old machinist with a hundreds of National Wheelstander (example Little Red Wagon) engines as well as thousands of daily drivers, hundreds of dirt track, drag race and ASA engines from my shop, always place the fluid in the intake runner then the exhaust as the chamber fill won't give you a definitive fluid check as in the intake and exhaust runners. Hope that helps in the future. I figure you'll work the guides, valve faces and seats anyhow. Have fun.

[@tinaroney9383]

You three clowns seem to have a lot of fun together.

[@georgevindo]

Its always better to find the leaks while its still in the shop, fix them and then no worries. Great work gents and ladies, thanks for the video.

[@dougdean3134]

Great family affair working on the Gonzo

[@steveclark4291]

Thank you Chad , Stacey and crew for the update on Gonzo ! I think that it's awesome that the ladies are taking a entrust in helping out in the shop !

[@doughamm5590]

Awesome job y'all. Ole girl sounds and looks good. Wish my grandpa's sounded that good when i was a kid. It had the straight 6 with 3 on the tree. The baby blue like ur bed

[@samramone84]

Great video! Just a friendly tip: the camera movement was a bit shaky at times. Using a tripod or a stabilizer might help with smoother shots. Also, holding the shot for longer and avoiding quick panning or zooming in and out too much can make the video easier to watch. Keep up the good work!

[@chadsfab]

Agreed. Candace is learning and will get better and better with that. Thank you for reaching out and for your support!

[@JDZiemba1773]

I learned a long time ago not to shrug off an observation of my wifes.....she's smart just like Chads better half ❤️🇺🇲

[@Kristof-Kay]

awesome to see Gonzo`s engine fire up, its sounds really good too, great work by everyone getting it over the line, thanks as always for sharing

[@birddog435]

Can’t wait to see the test drive, and see how it burns the tires!!!

[@davidjabbusch9632]

Love your Talking and having Fun! Like the Women helping out.

[@wink9970]

watching the garage with a load of non-mechanics sure is fun and entertaining commentary

[@anthonylee2099]

It’s Alive! Great job

[@skyepilotte11]

Good to see ladies getting their hands dirty. Gonzo sounds fantastic...Great work.

[@michaeldix3139]

Love the family feeling Chad. Not just you but good things start somewhere

[@Nickwillfixit]

Love to see the ladies getting their hands dirty, my misses would not even come in my workshop with a drink and sandwich let alone get involved in stripping a engine so 9/10 for effort.

[@MichaelMaxim-ft5sv]

Momma Stacy is on it today...great crew- great video thanks

[@rolandtb3]

Starts easy, sounds great. For now all the leaks and drips taken care of. Next tuning, test drive, dyno, burnout. Gonzo breathes again.

[@johnnygiddings4992]

Enjoy ur builds, however need to talk to the camera more, so ur followers feel more engaged. Like Paul and Mat, explain what’s next and what ur doing. Cool builds keep them coming!

[@robertr4193]

The motor sound pretty good.

[@brentcason4353]

Amen Chad boost makes everything better.

[@1944chevytruck]

GOOD JOB EVERYONE!

[@TomBostian8255]

Chad, they keep teasing you about your bald head. They tease me too. I just tell them "God only made a few perfect heads! He covered the rest with hair!"

[@mathewfullerton8577]

My brother-in-law used to say that. I reminded him that grass doesn't grow on cement. 😂

[@Ryan_Tidwell]

Always a pleasure to watch. Thanks, Chad's Fab 👍

[@karauriarangiuaia3111]

Gosh those dang lil drip drops like to ruin the funtime sometimes but starts up like dream well done guys n girls👍🏾👍🏾

[@AdventuringwiththeS.G.O.C.C]

A nice day always starts with a video from Chads Fab.

[@edwinschlee8374]

Sounds great. Hope you got all the leaks fixed. Stacie, are you going to be the next mechanic, or do you just want to see how everything works. Congrats on hitting 100k!

[@chadsfab]

I just like seeing/learning how everything works. Most of our family conversations are around vehicles with the boys being interested in all that too, which means I need to keep learning so I can keep up. Otherwise I'd miss out on all those interactions with Chad and the boys and I don't want to miss a thing. 😉😁

[@thatdave86]

Stacie,next video has to be the boys tearing down the house chores ,beds, laundry,dishes ,meal preparation, tender to grandchildren,window cleaning and more ,plus knitting,sewing ,thats sure ro get a laugh or two 😊

[@chadsfab]

😂😂

[@Bigdaddyslasher]

Watching the gals get their hands dirty and trying not to touch anything with them is hilarious good fun

[@tonypatrick9362]

Sounds good Chad I’m proud of it. Can’t wait to see you get the driver to church.

[@TheOldaz1]

Engine sounds solid, now to see how it goes, then dyno. Thanks guys.

[@jameskendrick573]

Mrs Stacey the motor momma awesome

[@michaeltablet8577]

Absolutely Awesome!!

[@PeterTremlett]

Great to see Stace, and co having fun in the shed

[@lorenmeyer5290]

Sounds great Chad!

[@johnengland7097]

Love you guys. Keep the videos coming.

[@gregchewie3059]

DANG!!! Chad's is going PG-13!!! Women working on engines!! 😍❤️😍

[@charleswelch249]

Love watching your family having fun and working well together. I believe you have the truck running awesome and ready for unlimited burnouts for a long time.

[@papatomsthoughts]

Loved seeing the girls getting their hands dirty. 😅😅😅😅

[@michaelc.3812]

Chad is a gifted technician and his wiring harnesses are better than factory! So please, let’s keep this about Chad and the real mechanics and not make a joke out of the channel.

[@Westerntraveler]

Time to finish the heart Transplant on Gonzo!! Look out smokey burnout in the future

[@guypehaim1080]

When you took your compression tests, you can tell by the movement of the needle on the gauge what the problem is with the compression. A leaky valve or bad rings are diagnosed by the gauge as the cylinder builds pressure.

[@wesleypulkka7447]

Chad, great swap! Sounds fantastic! A friend with a high mile Silverado had a trans leak from a casting flaw and the factory told him to epoxy it! Cheers!

[@jhaedtler]

I have done aircraft engines with tubes and the oil return line must have an accumulation tank in line prior to retuning to the oil sump. When hot the oil leaving the turbo is almost foaming.

[@bryduhbikeguy]

Thanks for the info.I've wondered about that when the boobs that do the '2-step' contests until their turbos are glowing red hot.That oil is 'ready to burst into flame' hot, and I thought about a cooling unit before it goes back into the engine.

[@jhaedtler]

@@bryduhbikeguy The difference between airplanes and race cars is an aircraft is only trying to maintain normal HP at altitude. You lose one inch of manifold Pressure for every thousand feet you go up. A race car just wants pure HP NOW. Turbos are slow reacting so a race car must have it going all the time. I have seen the oil melt an oil line made of rubber!

[@jberg8159]

JB weld for the win

[@t.l.robinson2162]

I have not seen Korbin Approved sticker in awhile.

[@chadsfab]

Haven't had any in a bit, we gave them all away. Might just have to print some more 😁

[@DJ-hv4ju]

1976, Utah State Big Bass Contest. Was in the boat at Waweep I cast out the lure and it got snagged, went to un-snagg the hook I saw it reached in the water grabbed it by the gills and pulled out a 2nd place bigmouth bass. Now that's a true story.

[@usmcchet]

Love your channel, love seeing the family, and love see what you all do.

[@joshpitsch8570]

Good to see you and paul on the onxbuild, you got my vote

[@chadsfab]

Thank you, appreciate that!

[@joshpitsch8570]

I support Rudy, Holly, Colt, and Rory, butt you get my vote

[@joshpitsch8570]

As someone who grew up without a dad, I wish chad was their

[@chadsfab]

@@joshpitsch8570 Paul and I really appreciate that sir.

[@Wootangtw]

Awesome …thanks guys and gal’s…

[@ponypwr]

Stacie still asks questions like a kid following dad around...😂 Corbin is his mom made over!

[@chadsfab]

Probably so 😂 I didn't have a dad that let me ask any questions growing up so I have a lot of catching up to do. - Stacie

[@j.j.clingman4083]

Awesome video Chad!! It’s definitely nice seeing Gonzo getting all fixed up and have better drivability out of it!!! There are still some old Chevy trucks out there but they are getting harder to find a good one for sure!!! Remember keep up all the hard work buddy!!!!

[@gregcaspari5893]

I have been waiting with baited breath for this episode🎉

[@nathansharp3193]

That Mike Rowe quote is a good one. edit: 38:34

[@rickweland2785]

Sounds great 👍 👌

[@michaelcooper1914]

Awesome

[@keolam885]

Well Stacey.... it's official you and Chad need to head up to Pauls shop to have a weld off with Michelle and Jaymie!

[@chadsfab]

😂🤣😂 I'll need Chad to give me a few pointers first, since I haven't welded yet.

[@keolam885]

​@@chadsfab HAHA i can' wait to see that vid!

[@68cmyers]

Nice Harbour Freight plug "Hercules Hercules!"

[@brianboys9015]

well done girls and boys

[@LAP1050]

Run Gonzo Run !!!😊

[@Viperred26]

Hey chad awesome show i like you guys i never have enough time to work my projects like you guys being a truck driver 😊

[@j.j.clingman4083]

I baught a set of the big AFR heads for my 421 sbc I built and with the quality of machine work and everything with them and what I got them for I definitely was money and time ahead of having a set of used heads gone through!! The heads was also ported and polished and definitely put out some really good numbers on the dyno also!!! I definitely wouldn’t buy any other heads after the seeing the quality of AFR heads are for sure!!! I have bought Edelbrock heads before and the valves didn’t even seat properly and had to have a bunch of work done to them before even being able to install them!!! Definitely money and time ahead when you go with AFR heads!!!!

[@MarkoMygun]

Aww man I wanted to see Gonzo do some burn outs oh well maybe next week. We'll you guy's did a good job, thanks for the no burn out video. Lol

[@FordMasterTravis]

Y’all need to invest in a topside creeper you will love it once you use one

[@STEEL-IN-UT]

Corner #4, G-search Roundabout Raceway. After meeting you at the car show I found a FB posting and Speedway. It was great to meet you 😊

[@SQUIDX1973]

Hey chad, you're an amazing man. Keep up your great work, videos and faith. Blessings to you all 🙏. From Orlando Florida.

[@floyd6545]

Congrats on the 100,000 subscribers.

[@chadsfab]

Thank you so much 😀

[@bobtucker8875]

Really like the truck, great job guys 💪.

[@Forbye4]

Great to meet Y’all in PG over the weekend, love the new hat!

[@chadsfab]

Glad you came and visited and that you love the hat! 😁

[@BigalOffroad]

Plenty to be proud of, you've just let vanity go.

[@alandent7231]

Greetings from OREGON

[@greasyhandsauto-shaunbutte9726]

I know that’s an LS but, have you seen the runners on the Left head? Impressive

[@jsharp1776]

Love your content. Thank you guys so much....

[@rogerhowell6230]

Nice lope.

[@jeffross3428]

Chad it sure sounded better with the bigger cam . It sounds like Grandma's grocery getter now not like the power house it did 😭😭😭

[@reinovator]

Man you make me feel old I'm older than Gonzo.

[@chadsfab]

They say we're only as old as we feel, so don't feel old no matter what anyone says!

[@reinovator]

@@chadsfab I feel 45 but my Body says 80. my DL says 64. my Panel truck was built when I was in High school 1977 That Is what I wish I was.

[@keithmerchant225]

As always Great video's and always learning something.. Chad I have a ? for you. What would you say is the best and most relieable jump pack and also what is the best portable air compresser have you found. Thanks for any help on this and keep the video's coming.

[@pcspecialistpdx]

You can avoid grabbing the 11mm by mistake by throwing the 11mm away. It isn't used for anything.

[@michaelnieman6218]

Chad only has 1 BOSS and that would be his wife remember gents HAPPY WIFE HAPPY LIFE

[@DennisMcGrew]

great as always great content very entertaining

[@Letstallklife1954]

Sounds like a 2024 6.2 1/2 ton truck

[@zdiver1]

Tyson and Dusty look like a typical #38 Dangerboy fan.

[@skippyjones4195]

Ok NOW I wanna Hug 😭😂👍💪🏻☮️❤️✌️

[@jeremyjseifert]

What's is and is in the new motor? SBE? Cam? Ring gap?

[@pjstapleton417]

Chad! You are amazing!!!!

[@SteveMadsen-n2j]

👍

[@philipsearls1946]

Remember Chad, The older the Fiddle the Sweater the Tune.

[@n4gix]

Sweeter???

[@philipsearls1946]

@@n4gix oops, my bad.

[@pappete9988]

👊

[@kc6nfv746]

Think they make a device for the radiator hose it has a radiator cap it could be install in the center of the hose this way they may not get a air pocket

[@wizardind3203]

actually it's like snow skiing we are going snowblind