Good Vibrations. 1979 AMF Harley-Davidson XLH1000 Ironhead Sportster

  Рет қаралды 317

Immingham Ironhead

Immingham Ironhead

Күн бұрын

Пікірлер: 12
@maryspeight2840
@maryspeight2840 14 күн бұрын
Good,vibes always save the day ! Cheers ! G. Speight
@MoeLarrycurly1
@MoeLarrycurly1 14 күн бұрын
Well that's the best case scenario it helped itself and helped you 👍🏼
@junebug5882
@junebug5882 14 күн бұрын
Lol.that worked out good.i would advise pulling your other bolts one at a time and apply a tiny bit of thread lock.
@MoeLarrycurly1
@MoeLarrycurly1 14 күн бұрын
👍🏼🏍️👍🏾
@MoeLarrycurly1
@MoeLarrycurly1 14 күн бұрын
My bike is a shovelhead 1970 and it vibrates too. But at my age it helps with my arthritis....😮😊😀
@ImminghamIronhead
@ImminghamIronhead 13 күн бұрын
Shovels are the best looking motors ever made; nice tickover sound, too. Does yours have the dry clutch?
@MoeLarrycurly1
@MoeLarrycurly1 13 күн бұрын
@ImminghamIronhead Well originally it had a wet clutch. Now it still does but I don't route the oil from the motor to the primary anymore I isolated like a modern Harley. That way any of the clutch contaminants don't get drug through the motor. And I think the filter is after the oil has been pumped it goes from the tank to the motor and then to the filter and then back to the tank if I remember. So I just put about 5 oz in the primary it is the original clutches. So in essence they are wet but they're not bathed or at least there's less in the primary now that it's isolated rather than getting a stream from the motor pump and then drawn back to the pump and then to the tank. 🏍️👍🏼
@ImminghamIronhead
@ImminghamIronhead 12 күн бұрын
@@MoeLarrycurly1 It's similar on mine; the primary and gearbox share about 700ml (30 oz?) of 20W/50. The oil tank just goes to the engine and back, so it's semi-unit rather than full unit like my old Hondas.
@stevechinn1308
@stevechinn1308 14 күн бұрын
I've recently bought a 75 XLH that I'm looking forward to getting stuck into this year. I like your channel, please keep it up! Quick question, where do you buy your parts from?
@ImminghamIronhead
@ImminghamIronhead 13 күн бұрын
eBay and Hogparts seem to have everything between them. If you're in the UK, I got the barrels rebored at Matt's Machine Shop in Abercynon.
@stevechinn1308
@stevechinn1308 14 сағат бұрын
@ImminghamIronhead heyup, 8 am and thanks for this, apologies for the late reply, just seen the comments! Please keep up your good work on the Ironhead. I'm going to start on mine in a few months 👍
@screech1233
@screech1233 14 күн бұрын
Ask any woman out there how good vibrations are !!!! LOL
Top End Gaskets. 1979 AMF Harley-Davidson XLH1000 Ironhead Sportster
7:21
Building a Sportster Chopper in 15 Minutes | Start to Finish
15:06
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Installing a $59 Knock Off CV Carb On a Softail Just for Fun
20:27
Vintage Harleys Revived
Рет қаралды 250 М.
Motorcycle or Motorbike? 1979 AMF Harley-Davidson XLH1000 Ironhead Sportster
3:44
Harley-Davidson - Road Glide M8 COMPLETELY DESTROYED ITSELF!!!
22:13
Motor Metal Life
Рет қаралды 56 М.
No more kickstarting my Yamaha Ténéré from 1987! S8, EP33
30:04
Itchy Boots
Рет қаралды 427 М.
Harley Sportster Project:-  883 to 1200 Conversion,  Time-Lapse End to End!
28:08
I Can’t Believe I Traded My Harley Davidson Ironhead Sportster For This!
7:34
Mason George Motorcycles
Рет қаралды 6 М.
Adjusting Pushrods On Harley Davidson Ironhead Sportster
9:40
SaddleTramp
Рет қаралды 50 М.