SONY VAIO Overheating.

[@INITIAL_L]

Thank you for sharing how to fix the overheating issue on Vaio. It's beneficial as well on how to clean the dust inside. 🙏👍

[@GOODTIMEStech]

Hi, Happy to know the video is useful. Thank you, have a GOODTIME.

[@datthana]

I found we can remove the fan blade easily by pull it softly. I wash the fan blade under water before put it back. Thanks your vdo for guiding me how to fix it.

[@GOODTIMEStech]

Sir, Happy to know that the video was helpful. Thank you for watching the video and posting comment about your findings, have a GOODTIME.

[@dcnasoni]

Good video,helpful on the process of dismanteling and getting to the overheating issue!

[@magsaysaybato-xm5jl]

it is nice i want try it, maybe i can do it.😊

[@ravikiranbadarli8318]

Thanq very much ,,,,I fixed mine by seeing ur video

[@MrFinanceWalla]

Thank you. Solved my laptop problem

[@GOODTIMEStech]

You are most welcome, thank you for watching the video, have a GOODTIME....

[@beetlecrusher8217]

Nice one Bernard. Your video has helped give me the confidence to have a go at fixing an old Sony VPCEB3J1E. Thank you.

[@JaSa__]

I also feel d same

[@oxidoc4301]

Thank you for your cleaning fan idea🎉🎉

[@GOODTIMEStech]

Most welcome. Thank you for watching the video, have a GOODTIME....

[@Tom-rd5no]

Thanks for the video! I have a question - Is it compulsory to apply a new layer of thermal paste when replacing the fan? Or can you simply remove the fan, clean heatsink/fan/vents and then screw it back on? Thanks!

[@rontroy3843]

Odds are that the paste condition is part of why it overheats. And if you've already torn it down, then it should be dirt cheap and fairly easy to clean it off and apply new paste.

[@billschwenke790]

I virtually never due, just insure a good contact, but add paste if lacking

[@billschwenke790]

**do**

[@bobbyenyioha790]

Thanks sir great video but where do I get the white substance please help

[@nickhaddock8658]

Thanks for this video - I can concur that this DID cause my GPU to fail :-( started getting high speed fan and display glitching, now it wont power up - so for the sake of cleaning the fan I'm now replacing the motherboard. Its such a good machine i'm not going to bin it!

[@braincell4536]

Just bin it. Aand buy a better one

[@billschwenke790]

I've encountered no screen anamoly but backlight normally an LVDS issue, on a ROG751 spendy Asus laptop, now there's no POST and just fan and power pilot light before shut down and it appeared GPU fail due to it's side fan not operating consistently, which is a tip to definitely look out for before you bin your mobo ...or brick it, as they say

[@Can-ue7de]

Thank you very much. It helped a lot.

[@billschwenke790]

I bought a Core i5 model VPCF131FM with no support or info online matching it, came with GT310 and dual core 480m processor. Upgrading to Core i7 four core as many online seem equipped, it turns off randomly, no dust, some noisy fan but no excessive heating to the touch, still, going to have to downgrade again to two cores....i7 hopefully; the 620m I have and used on Asus B53J model successfully

[@rf2910]

What is the nsme of the compound that you apply?

[@prakashboodhram2378]

Thank you so much Sir.

[@mariapopp6924]

Thank you!

[@MrAnderson1983]

ahh and also u did a terrible job of cleaning the old thermal compound ( if u did clean it ... )

[@jrstatues7849]

can you share fan name please

[@billschwenke790]

Pull off and reapplying the case rear lid should be one side with jacks first, care given to VGA and JDMI openings

[@billschwenke790]

Typo obviously; HDMI

[@antibogem]

Thanks , this video help to solve my problem..

[@mohankora1349]

Very useful info. Keep it up, good job

[@GOODTIMEStech]

Thank You Sir.

[@alexxen3123]

Thank you so much dude!

[@aliplayz69696]

How about I cannot buy a thermal paste what another option..its OK of nivia cream?

[@pythoninfotech2432]

😂😂Buy Thermal Paste Bro. Only 100 rupees

[@robinwatson4282]

Is it OK to just add more thermal paste (on top of the old)? In most videos I've seen, they invariably take cleanliness to a religious level - completely remove the old thermal paste, and then add fresh paste.

[@conceptrat]

No not really. Leaving the old thermal paste on can cause thermal issues in itself and is just plain lazy. As is blowing from your mouth (wet) to remove the dust buildup on and around the heatsink fins. That's not to say that it's not an improvement in this case as the fins were pretty damn choked. My suggestion would be to first make sure to use a grounding strap so you don't go zapping anything with a static charge from yourself or environment. Then a you can use some fine tweezers to remove the larger bits of dust. And to finish off, a softer brush like say artwork brushes and some compressed air, either from a can or an airbrushing tool if you have access to one. And obviously, blow the dust out from heatsink not through it as you'll just push it further in. Cleaning the old thermal paste off with some Isopropyl Alcohol (>95% is best) and cotton buds or lint free paper towel. Remove any old thermal pads too if that's what was used (you can see this in the video he didn't remove it) as that could cause air gaps and ill fitting heatsink later. Don't use too much thermal paste, usually a small blob about a third to half the size of the heat plate is right. Any more and you'll end up with a mess to clean up next time round. And don't smooth the paste down. Putting the heatsink back on gently and apply a small amount of pressure will spread it out and ensure good coverage and contact with both surfaces.

[@robinwatson4282]

@@conceptrat Thank you for the detailed reply - it's much appreciated.

[@siddikunus5855]

Ein sehr hilfreiches Video = a very good helpful video

[@brian_6424]

thank you

[@jai903]

Nice Video...I tried the same, unfortunately as thermal greese sticks firmly with the cpu,when i plug out the heat sink from CPU without unlocking my processor, pins got damaged...So to the viewers while removing heat sink from CPU unlock the CPU ,take the processor out from the socket along with the heat sink and then try seperating heat sink & CPU...Fortunately i could align processor pins by using knife moving along entire rows and column....

[@billschwenke790]

My tip for glue like cement HSF assembly, always wiggle sideways at first, use precision screwdriver to pull up each side the same, like equal unscrew force and taking turns on each of four Normal screw allotment

[@ChawShaka]

That is the wrong way to clean it. You should clean it 100% with Iso Alcohol, remove all the old paste and then apply the new one.

[@carbon1493]

hi i have a sony vaio VPCA1S1E CAN I UPGRADE IT TO AN I5 CPU

[@billschwenke790]

I upgrade with whatever parts I collect before, it's possible if ZIF PGA is employed, if soldered in place aka BGA than, no, you're SOL

[@technicalbabaji8985]

Sirr I have this laptop it was not turning on

[@flaxerfreedo7184]

sory sir but what is that cream??

[@MrSchokobaer3000]

It is Thermal paste. You have to apply it every time when changing cooler on cpu or gpu.

[@timothydotson5497]

unclear as to what compound paste you used

[@zazzaz84]

thanks

[@siiryan9184]

Thankss

[@blacknikolai81]

Thx bro

[@GOODTIMEStech]

Thank you for watching. Have a GOODTIME.

[@spider_cat15]

i have like your pc

[@suniaryal9977]

Every thing is good but only you did it very much dirty way yourself & didn’t clean the paste used before 🤣

[@theblackstar4747]

I have a question would it be ok if i don't use the glue ??!

[@arlandas4417]

What glue?

[@dheerajkaushik]

In case of heat sink paste is not available then how it is possible

[@rontroy3843]

@@dheerajkaushik No idea why you can't find thermal paste. Very easy to get item in the US. Any store that sells computer parts.

[@cantonatheking]

@@dheerajkaushik ebay 2$ 3$

[@billschwenke790]

Thermal paste tech sites recommend, I have a Microcenter store in my State, but any repair shop should make it available

[@MrPavel225]

Too much paste. Need much less.

[@micoberss5579]

Халтура

[@24X7GAMING]

Use an Airduster next time to clean the fan.... spend some money ;)