Will It Ever End???

[@claytoncourier]

Keep It up guys! I watch all of your posts and you guys have a lot of heart and determination. I have a 2014 jku and thats what started me watching your channel. All of your trials and sometimes errors help me with my build. Im gonna cop me one of your hats here soon! PLEASE keep the videos coming

[@dloadthis1617]

I'm really surprised you guys don't install a CB radio in your Jeeps... They are great fun and can come in handy in an emergency. I have an 8 ft tall antenna that I welded a weight on the tip of it so when I stop it bounces back and forth... Looks really cool!

[@Laurie_H]

My OCD was going crazy because you cut the large wholes unevenly on both sides of the hood. Even though they got covered up you can still see them from the underside when the hood is lifted open to service the Jeep. I would have taken the time to spray paint the nuts and bolts and the smaller drilled holes, just to help prevent rust. Also connecting a light on your licence plate bracket is a no brainer. Normally I thumbs up all your videos but I just thought you guys cut corners this time. The reason I love your videos is because you guys take the extra time to do things right, and mask things off, or properly prepare your surfaces and work areas, basically going that extra mile.

[@jaimerojas3231]

This is one of the best looking jeep's I've seen please keep it

[@geostanley409]

The reason for cutting the entire section out is to eliminate any change of mud or water getting trapped between the louvre panel and the hood to prevent future rust problems. Once the louvre is installed it is very difficult to clean under the actual louvre slots. Do yourself a favor and cut at least a half inch around all of the louvre slots to prevent mud/water from sitting on the hood surface and creating a rust issue. There’s a reason for installation instructions. You should always follow them for the best results, even if you don’t understand why they want it that way.

[@bmartin7828]

Jeep owes you guys, I was not a fan of Jeeps until I saw ALL THESE VIDS, now I need a newer JK 4 door for the wife, grandsons, and myself to wheel around. I might even have to buy a new 2020 MOAB or RUBICON, and then mod it for sure. Thanks and PEACE!

[@j.harker8311]

"Don't ever not trust what I give you " idk why but that was hysterical 😂

[@JEE_13]

End result looks great, as usual. I don't think I'd have the nerve to cut holes in a good hood. Well done sirs.

[@kustomacegarage5320]

Build that Toyota up it can be a real good trail truck... Trail Gear will have everything for that truck. For the rockers are rusted out get 2 x 3 square tubing and just put that in as rock sliders.

[@goonzquad]

Kustom Ace Yea definitely will get that thing built soon, will probably just be a woods toy

[@_MichaelHerrera]

“DONT EVER NOT TRUST WHAT I GIVE YOU” lol that part was great.

[@Mightyduck831]

Best part of the day is when you guys upload a video. Keep up the great work

[@goonzquad]

Ernesto Munoz Thanks!!!!

[@JoseRodriguez-ki5pj]

Man that Jeep just looks better and better every time!!!

[@kylecanole213]

This is one beautiful jeep. You two did amazing.

[@MURRAYCOUNTY77]

Does the headlights not have the blinker function? If so, you could wire those up with the blinkers for more visibility.

[@ClawBoss]

Another badass video!

[@goonzquad]

ClawBoss Thank you sir

[@billynunns]

Have mine on my Jeep for over a year with no issues.

[@Odin_View]

Just installed one of these 2 days ago on my JK. I did the full cut outs since I'm in Phoenix.

[@goonzquad]

Jay Folts Yea that weather is awesome there I bet!

[@cclngthr]

Alternators are not waterproof. When they are in operation, water can destroy the internals by shorting it out.

[@goonzquad]

Good thing we left it covered.

[@cclngthr]

goonzquad I had one fail when I went through a car wash in my Ford Contour; which the alternator is wedged between the firewall and engine right next to the driveshaft. Friend of mine had a Jeep Cherokee that the alternator is on the bottom and he went through a deep puddle while wheeling and he ended up walking out and needing the jeep towed out.

[@Pointercitoblanco]

Glad you know this now I'm not the only who knows this

[@cclngthr]

Flan Gaming12 Need to keep the alternator covered as best you can. Where mine is is right in the wheel well area and the only way to keep it dry is make a splash shield in the wheel well and have it covered from underneath if possible.

[@joshruby]

those screw hold you drilled are going to rust did you touch up paint them too.

[@kristeremtweden1481]

what you did with that loo-ver-installation was to make little water/moist traps in all those places where you didn't cut out ... water and moist will get between the plate and the hood and slowly but surely eat it's way in ... a better way to do it had been to cut it all out as shown in the template then make litte shields/covers for the part you want to keep dry

[@aakashnair5515]

Never considered owning/buying a TJ always a 4 door JK guy not even JL but I've been watching you guys for a long time and after seeing how nice this whole set up looks already, might have to consider it...

[@goonzquad]

Aakash Nair I honestly like the TJ over any other model

[@hockeysyko1]

That Jeep is beautiful!!!

[@DrBackroad]

That jeep is gorgeous guys 😩😍

[@jayfranco9969]

Love the color on that Jeep!

[@staylitpar]

Love this jeep build awesome to watch

[@mustafaal-samhouri3846]

Great video guys as always I suggest to spray the screws black to match the hood louver

[@Rocklanderoverland]

Next time lay a blanket or tarp over the motor while you're drilling so metal shavings don't get all over your engine bay. Looks good guys!

[@IIPOLOII]

Channel is getting big, love it!

[@goonzquad]

DECO graff thanks for your support

[@royceisfaster]

love the professionalism! Never skipping a step

[@goonzquad]

Royce Fast thanks we try our best

[@thomaskimball4088]

I was thinking of getting that same good Louver for my car but I live in Oregon where it rains 300 days a year, but my car overheats when I sit so this will be perfect thank you guys!!

[@goonzquad]

Thomas Kimball This is prefect for you! I’m glad we could help!

[@metalman065]

This was my Favorite Build!! I wish i could've been in better shape to buy it, would've loved to own it. Thanks for the videos guys.

[@scottfletcher199]

Very Nice work Gentlemen! Ya'll should be Proud of the finished product!

[@goonzquad]

Scott Fletcher Thank you, we are proud of the results so far!

[@Julian-do7bv]

This was cool to watch yall drill holes in the hood it looks like it turned out great and will function well also

[@rgkimball609]

Damn that thing is hot! You guys did an amazing job bringing it back to life!

[@LibertyLensOfficial]

Appreciate the videos, kinda sad that you didnt hook the wiring up for the plate.. You guys do excellent work.. but don't cut corners brotha,, one thing I appreciate about your work is your thorough attention to detail..Hook that light up! Great vid, thanks again Goonzquad!!!!!

[@SJJEEPER]

i got this on my jeep and works great as well as looks mean as hell

[@chowming163]

Will you guys upgrade the lockers in both diffs or stick with stock for now? Been debating on doing it to my Jeep

[@totokoko8082]

They actually make the impossible greetings from Germany

[@mikerobbins5049]

I like the hood louver.... and all in all..... a good looking rig... I’m sure you will have fun wheeling it. my 2010 is almost that same blue and I think I have decided to sell it....

[@goonzquad]

Mike Robbins Awesome thanks! Sell it and build another

[@mikerobbins5049]

goonzquad thats the plan. Gonna start with a new JL Rubicon

[@caseywiseman9889]

this is my dream vehicle. love the color and love the build

[@marlerusticgeek0075]

The more I see of this Rubi,the more I want a Jeep😍

[@Knoxie418]

Line the tub with some raptor liner!

[@christopherrandell6741]

What paint is that, is there a specific color code or place I can get that sexy blue for my jeep

[@TommyAlanRaines]

Tip: Use low-tack spray adhesive to keep templates in place.

[@justaguyin1983]

3 dislikes? What's wrong with this people, how can someone dislike this video, or any other goonzquad video, this guys are super nice, respectful and they take their own time to entertain people, please don't hate.

[@goonzquad]

jhovani herrera Lol I love a little hate once in a while, thanks for your support though!

[@Chechenzko]

I’m with jhovani I’ve followed you since about 5 months now! And I honestly love how you handled this TJ, in this episode I would’ve unmounted the hood to grind tho, but that’s just me, you did a great job all over!!! Cheers from Mexico!

[@trutacgear]

Probably this is implanted from you tube like bots ..!

[@mhawkins1975]

Awesome looking jeep guys a gorgeous colour too.i watch all your videos.👍🏻

[@davidgaron453]

Hey..You guys ever see that Red Round Led Breaklite that goes under the Spare? I saw one lastnight on Rubicon and I thought about how good that would look on your jeep.

[@marcusmendoza9354]

Are y’all gonna full the holes for the license on the body ?

[@goonzquad]

Marcus Mendoza maybe or just leave them

[@wanderer1570]

Where did you get the rims?

[@ivanrosas6023]

This jeep just gets better and better.

[@goonzquad]

Ivan Rosas oh yeah, a few more tweaks

[@fightzoid]

Loover not lowver. Louver.

[@goonzquad]

Dons stuff channel Dang they should’ve spelled it that way also lol. Thanks I learned something today and will never pronounce it that way again haha

[@rickylongoria2168]

I really want to know what rims and tires you guys used for the Jeep cuz I want to use the same for my 87 Ford F-150

[@joeyh7796]

Please please for the love of God don’t sell this one!

[@goonzquad]

Eclipse Guy probably won’t

[@AndrewBrowner]

except to me,,, 12k im on my way down from the great north

[@torang_]

If you find one for 12k let me know, ill offer more. lol

[@AndrewBrowner]

bought an 05 LJ rubicon for 9K 90,000 kilometers

[@haunko_kun3563]

B bb

[@WilliamPinkerton1]

The Jeep is looking good yall

[@goonzquad]

William Pinkerton thanks!

[@Grimaldo420]

bad ass jeep guys!!! makes me want one now lol

[@Baseball4life518]

(Loo-ver)

[@Baseball4life518]

Love the jeep tho had same one color matched silver 02 tj on 35 grabbers

[@CraigWorkman]

It bugged me on this episode. Normallybits when they say sub woooooooooofer

[@goonzquad]

Cody Jones I never knew how to pronounce it lol, thanks! You learn something every day.

[@CHVLKiD]

That rubicon looks better and better every video guys. Great great job 👍🏻

[@goonzquad]

CHVLKiD Thanks bro

[@xXThePointXx]

Put a piece of tape around the drill bit to keep from banging up the paint on push through.

[@yandel2515]

The jeep looks badass! Keep up the great work

[@goonzquad]

Yandel Aquino Thanks

[@gilbro1978]

Damn that jeep turned out sweet

[@marioglodek6755]

Sup Guys, Love the Build, well done, just a random question. but how does the spare wheel come off with that Numberplate Bracket? Thumbs up from South Africa

[@HOOCH102471]

Hey guys, make sure you check your state laws regarding the license plate. Some states require that the license plate be illuminated.

[@damianbartosz4533]

Damn brothers i love your work, God bless you

[@AkashdeepSingh-gg7ns]

I love to watching all the old video

[@tylermullen3195]

Love this Jeep guys

[@supercharged00gtp]

Wrap some tape around the drill bit where you want it to stop, works to control depth the drill bit goes through.

[@goonzquad]

Rich Beach I love the advice! I learn so much from you.

[@serkisshakenians1026]

God bless you and your job Bravo. Bravo. Bravo. Bravo.

[@masteronesolo4615]

How come you guys didn't do some paint on the holes you drilled for the hood cover??? Won't those rust?

[@goonzquad]

masteronesolo I don’t think they’ll get bad there, ran it before on another Jeep and no signs of rust

[@rogerwixom759]

the jeep is taking great shape now you can a royal purple product for antifreeze and will also keep you jeep or what ever vehicle run cooler

[@goonzquad]

roger wixom good point, thanks

[@ralphm6234]

I've never been a fan of these hood Louvers, although they look nice. I live in South Florida which is really hot, specially during summer, and I don't have heating problems with my jeep. Just do preventive maintenance and change your water pump and thermostat before it breaks-down.

[@brandon9430]

hey guys just an fyi Kiddie had a recall on their extinguishers with the plastic handles as they had cases where the threads broke and sent all the pressure and chemical out the top of the extinguisher. you can call them and get a replacement. i'm pretty sure its free replacement too!

[@younesdjabou]

Best jeep aver! So dope, rubicon 😍

[@gtbear32]

use tape where your going to cut it cuts down on scratching and helps with your paint

[@nbowling10trio]

Looks good guys.

[@Jonathan-gv5tv]

looks great put a light bar on would look great

[@JoeGarofaloII]

I would love to see black headlight bezels on the rubicon to complete the front look. Also, How about painting a Hi-Lift Jack to match the paint and putting it on there?

[@goonzquad]

Joe Garofalo II dude a color match jack would be sick!

[@JoeGarofaloII]

goonzquad heck yeah man, it would make an awesome video too!

[@Rick-4552]

That is a fine lookin Jeep, Do another one!

[@goonzquad]

tom armstrong soon I want an LJ

[@ethandavenport6070]

Do y’all live in Fort Oglethorpe ga ??

[@anthonynespoli117]

You guys able to make it out to Jeep beach jam in Panama City beach?? U guys should try to get out there tomarrow. You guys need to get a booth out there for next year.

[@Metalcop5150]

When I installed my hood louvers, I taped up my drill bit, really thick with 2" tape, to act as a stop when I drilled through the hood. I also did NOT remove my hood for installation!! Not sure if anybody actually removed their hood. Every single how-to video, guys leave their hoods on. I went with the Hyline kit. It has flush mounted studs, and all the hardware is quality stainless. Mine also came with a laser cut steel template. It did cost about $50 more than the Poison Spyder kit, though. You get what you pay for... lol

[@GruntHarley]

Smittybilt G.E.A.R overhead storage would look great on this jeep.

[@goonzquad]

JaRHead600RR definitely, good tip!

[@erickserrano8919]

Best videos on youtube👌🏻

[@eliasrevy9216]

Beautiful jeep!! I just want to know how much this jeep cost?

[@copdwarriormcdonald7968]

Send that Jeep down to Mississippi for me, I will take good care of it! Motorman in Da Magnolia! Semper Fi and Can Do Peace

[@justwondering5540]

when those spark plug wires get wet your going to say Why baby Why lol

[@Daniel-ok6od]

That’s jeep o|||||o came a long way I would buy it but then again y’all deserve to keep it and drive it since y’all worked so hard on it🔥 great content been with y’all for a long time 👍🏻

[@scottkursch3169]

"Don't ever not trust wut ah give ya" LOL I dunno, that struck me funny and made me laugh.

[@scottkursch3169]

Another one, "And now...for deez nuts..."

[@ianmanzoni5141]

Love the jeep except the wedge at the front and the rammer, wouldve gotten a rammer thats more upwards rather than sticking out.

[@quancast1141]

Please get your hands on a 4 door Jeep would love to see one

[@stefanmaksic6019]

@goonzquad Whos Volvo VNL is in the background?

[@alltimeball2078]

I didn’t know you were from Chattanooga but I see the Jeep in Fort Oglethorpe all the time ! Looks great in person

[@goonzquad]

Alltimeball yessir, I love to run to fort o for a burger at cookout

[@szolota]

Awesome job! You guys should do the original Grand Cherokee next

[@BrianJNoah]

Looking good! Just FYI louvers rhymes with Hoovers.

[@eliasrevy9216]

Beautiful jeep!! I just want to know how much this jeep cost

[@padenmartin6040]

Aye another blue Jeep vid, my favorite build

[@dakotahenderson2110]

Keep up the good work y guys I love your videos and your personality

[@goonzquad]

Dakota Henderson Thanks that means a lot

[@josebey7808]

LOVE JEEP !!!!!!........BEAUTIFUL 4X4 WELL DONE . PEACE

[@boriquais]

no paint for the bolt holes? rust?

[@goonzquad]

boriquais Good eye, but i don’t think it’ll rust too bad. I’ve had it before and it didn’t get bad.

[@roygreen9410]

You think you guys could put together a list of all the mods you’ve put into the rubicon, and total price? Build is looking sick!! Thanks!

[@goonzquad]

Roy Green Probably could.

[@KJMGarage]

Wow that damn Jeep is beautiful.

[@goonzquad]

KJM Garage thank you

[@KJMGarage]

goonzquad Hopefully one day I can get mine looking that good!