Gotta Keep The Wife Happy!!

[@rottngranny2876]

OMG this is the funniest thing watching Doug and Chet with the robot mop is the funniest thing we’ve seen for awhile. Thanks for sharing ❤😂

[@KyleandMeganNetzel]

The Big Swede should grow a major Mullet!! Bring it back!!!

[@Deadeye-zr2kb]

I really dont understand why you guys dont have 1 million subscribers because its the best of everything interesting and funny that Dougo guy is a hoot lol thanks Chet you work so hard to make it fun

[@raysmith7335]

Safety glasses boys!!

[@MidwestFarmToys]

No thanks.

[@tomweimer3419]

You ever think of drilling a pilot hole take about half the time !

[@mikefoley7561]

Use a dab grease on your blades to hold the washers to the blade and they won’t fall when gravity tries to pull them away.

[@danflynn1259]

I could watch Dugo and Chet for hours.

[@glenperry9048]

I learned to drill a small hole first then work up to the size I really need.

[@sprayguy9]

Guys will weld a small plate at an angle onto the inside of the back wheel of the 9530T to eject the straw out and prevent it from wearing off the paint

[@Farmer1277]

I would have started with smaller drill bits and worked my way up in size. Much easier.

[@dill5500]

That’s why the boys is coned no need

[@Farmer1277]

@@dill5500 obviously it wasn't working very well at all

[@jacobrobinson175]

Or get a mag drill we all know how to chet likes buying tools. And I'm pretty sure Milwaukee makes a battery-powered one.

[@dill5500]

@@jacobrobinson175 I have it I fucking love it

[@dill5500]

@@Farmer1277 prob needs a sharpening

[@shannonbrewer871]

Dougo cracks me up

[@stevedahlquist4587]

Yeah. Dugo and Chet are fun to watch and listen too.

[@MichaelRoessler-f5f]

MESSWEAR by BRODY CLEAN 🧹🧹🚿 Fantastic job keeping the equipment all shined up.

[@NeisenTransport]

I thought I was done laughing and here comes Big Swede.."is that your new mop...what's it done so far..3 acres" 😂😂

[@grantprankerd3269]

It's amazing what makes great viewing. 😂😂😂

[@juanitakauffman6336]

Erick’s ‘sun” streaked hair looks great. The mop saga was funny.

[@Nicholaskleyn]

You guys are great. Here I am at 5 am watching your latest video before I head to work.

[@MrDvdwills]

The bit about the floor cleaning robot is very funny. You should put it other sites as a standalone piece.

[@edelm6062]

I had a thought about when Eric was flipping the knives on the chopper, could he use a small magnet to magnetize the knife which would the magnetize the washers to hold them on the knife so he could tighten the bolt?

[@edelm6062]

Sure

[@marthab255]

Where are those safety glasses? All three of you guys work so well together. Great minds.

[@MidwestFarmToys]

Oh my god get a job.

[@sjbutram]

Convenience First, Safety Second in this Camp LOL

[@MidwestFarmToys]

@@sjbutram life is all about calculated risk. You can put every single piece of red tape and regulation in place and not be able to move or function or complete any task at all, Or you can do it never and assume way too much risk.... reality for most of us lies somewhere in between, where you use common sense so you can still accomplish tasks with some sort of efficiency without too drastic of an injury. I've drilled a million holes, this drill is giant and moving at a pretty slow RPM making large chips that aren't being thrown that fast. The risk just isn't that great. They're at a higher risk wearing clothes operating that thing than they are operating it without safety glasses

[@JD9RX830]

I like Brody’s new name. Brody Clean! I know you’re happy to have someone that likes to do it!

[@joegotz1971]

It is nice to see how well maintained your equipment is. The inside wash bay is a huge help in keeping the equipment clean. In the 70’s I worked for potato farmers who took care of nothing. The best was one year i was plowing for spring soybeans. The previous fall the combine was left in the field over the winter. When I reached the combine, they moved it over so I could continue plowing, and the left it until July for wheat harvest. I worked for them for 7 years, from community college until I graduated from architecture school. In the summers I worked 70 hours a week, and I made enough money for the school year. And those were good times!

[@dill5500]

When the combos cost 700k you spend a few thousand to maintain and clean a year

[@thomasharless9144]

I agree with Eric. NEVER delete a parallel arm, NEVER! I don't care how used it might be.

[@justinmills8084]

You need an oil squeeze can. They are great for oiling with the drill press. 👍

[@onemanswrld]

Oh man.... laughing so hard about the floor cleaning robot.... Dougo and Chet are a comedy team.....

[@dill5500]

They have a good relationship for sure

[@TheBaderBader]

I can’t use those robot vacuums because I spend more time watching it than doing the other things I’m supposed to be doing instead of vacuuming - just like Chet and Duogo 😂

[@billsauberlich7337]

Surprising what will entertain two grown men lol

[@timothykrott7248]

I agree they are hilarious

[@sethharrison421]

Should name it martin jr 😂😂

[@alexmikhael5061]

18:18 and chet says... ''good thing you are on SALERY huh??? no overtime when, oh well...'' was funny in my head... HAVE A GREAT ONE EVERY ONE!!!

[@SteveNicoson-u1i]

Thanks for another great video. It was most interesting. The junk pile robot is something else. Most entertaining gadget. Looks like it is trying to clean the floor at least. Better give it a chance. Laughter is good for us. Thanks for showing us junk pile. Good job Eric and Chet for putting the hitch on the back of the combine. Looks good. Nice idea. Brody sure does clean stuff up like you never seen before. Good going Brody. Air bags on trucks and trailers are not fun to replace. Have all the Minnesota salt and road junk all over and in them. Not the easiest job. You and Eric got it done. The shop looks full. Lots of busy projects right now. Thanks for everything Chet. All of you take care and be safe. The Iowa farm boy. Steve.

[@ardellwatry7067]

Your right Dugo Happy wife Happy life

[@ko9446]

Caulk around the hitch plate, keep mud and water out and causing rust.

[@BWilliamG]

Glad to see I’m not the only one that stands around watching my robot vac clean 😂🤣.

[@randycharest4507]

I TOTALLY ENJOYED WATCHING THE VIDEO CHET and DOUGO 😊

[@Showboat_Six]

Hey, you got my head lights on again that I sent!!! They are great!

[@perryschultz2468]

Always wear safety glasses when using drill press

[@marshallthews2333]

Its hard to believe these guys arent even at 400k subscribers. This is the best channel!

[@2591-y9x]

Obviously it's not.

[@userDominic_78]

Junk Pile is a perfect name, thanks for sharing as always Larson Farms !!

[@domangst8232]

Absolutely amazing that you are home so happy for you ❤❤ prayers for healing

[@joehuinker7009]

Father and son entertainment at its best. Get the mop out boys!

[@MegaBachster]

I love jumping on KZbin and seeing a new video posted by you guys. Always educational and entertaining!

[@erazemzo8890]

That show with Dougo, Chet and Junk Pile was hillarious 🤣

[@denault3985]

Everything at Larson Farms is so clean and neat... Remember Chet, safety glasses for you're eyes!

[@davidclaudy4822]

As a professional craftsman, who at 57 still has all his fingers and eyes, you should always have your PPE on and available. SMDH.

[@MidwestFarmToys]

@@davidclaudy4822 come off it mate. Farmers live in reality. We somehow survived for thousands of years just using common sense.

[@davidclaudy4822]

@@MidwestFarmToys I had a metal splinter in my eye once when I was young and reckless. Never again. That was enough and a bad experience at the Dr’s.

[@MidwestFarmToys]

@@davidclaudy4822 what a bummer. I bet it wasn't from a drill press. You can lie, But I bet it wasn't.

[@davidclaudy4822]

@@MidwestFarmToys Why would I lie. Man are you a trusting person. What an attitude to take.

[@AndreZA979]

Doug's take on Junk Pile is spot on! Can't wait to see the next installment of JP's adventures.

[@lindanelson8400]

Me too! My only concern is that AI mop could get so smart it takes over the shop and turns itself into a weapon against humanity. Look out, Terminator Mop. ☠️

[@robertfitzsimmons2507]

I don't understand why you wouldn't use a smaller drill bit first and then the bigger one. That's why it keeps doing that chet. Lol

[@mitchellfreeman8986]

Mini Martin 😂. Great entertainment

[@stevebiddle8912]

You guys are just like DOT employees. One machine working and several watching!!

[@grelgen]

"it's 6:01. I round up", hilarious

[@toyfarmer70]

Have to get a yakum rope so Martin can pull out the roomba if it gets stuck again. Lol

[@cw93711]

They are yankem sponsored. Use there code if you buy one.

[@stephenharvie1404]

Hey guys you need a mag drill with the annular cutting bits they would have cut through all 3 in 1 minute

[@beckyumphrey2626]

Chet, you started your channel much later than the rest of.them but are totally smoking them in number of views. This is a testament to your awesome dedication.

[@timothyp.5473]

It is much easier on the drill bits and the user to start with a smaller drill bit and then increase the bit size up. Once there smaller hole is made the bigger bits go thru with ease.

[@bobwaldner6332]

should have went through with a small drill and then step up with bigger drills till the right size

[@dennislang4375]

As we all know or have heard, each of us has a "doppleganger" somewhere. Last night I was watchint a 1964 WWII movie called "633 Squadron" and there was DOUG'S doppleganger! Cliff Robertson...check it out Amy, you would be the best judge! 🙂

[@dmorgan28]

You guys keep all your equipment clean and looking good. And that a a real job! Cool video. 👍❤️

[@scottjones6539]

Safety glasses boys

[@MidwestFarmToys]

For what?

[@blanekopp7339]

When they make one like Rosey on the Jetsons I'll buy one!!!

[@shaneprice9901]

Our auto sweeper is named “Hairy”. We have 2 dogs and 4 cats, so he’s covered in hair all the time

[@carriegrosenick6426]

Another great video Chet. Watching Dougo with the robot mop is the funniest.

[@AndrewBatman-e2f]

Need to upgrade to the robotics works great.

[@bryanlloyd1099]

Nothing better than a Dougo & Chet video!

[@artiejohnson40]

Just some friendly advice... Start with a smaller drill bit and work your way up... Also with the smaller drill bits, you want to go faster speeds and with bigger bits, you want to slow the speed down a little! Awesome content as usual fellas!!👍👍

[@waymonhutto2274]

The floor sweeper may work better if you put the chairs on the table and remove the floor mats before each cleaning.

[@billsauberlich7337]

After it cleans around the table pull the chains out from under the table so it can clean under it,works good

[@darylkimball6385]

When drilling holes that size maybe try starting with smaller bits and working up to the size You want

[@Sc-jf3yk]

Mag drill Takes longer to get it out the case than drill a hole

[@coryweber6188]

You always start with a smaller drill bit and work up to that large of a bit

[@garygruneich1275]

That is funny, you and your dad Watching a vacuum cleaner, clean the shop.

[@JoaoPires-pd9ot]

Oi 👍👍👍👍👍👍👏

[@matthewbuchholz9212]

Highly recommended getting the milwaukee whole dozer for drilling larger holes through steel. They are the ticket in my opinion

[@CaryGuyer]

For the next combine you decide to get, you should look into a full set of tracks all around. Try out a set of MUD HOG X-TRACKS for the rear. King of the field......

[@kylemorse7465]

Paint top with rhino liner we did that now we aint as bad as yall but we did rhino liner and it helps and I mean the top of the air bag that goes to the frame

[@magnusfalsing2254]

happy wife happy life

[@samcoon3822]

Brodys the man

[@matthoyle484]

Evening Chet!!!

[@carlportland]

Chet Find Sailing Zatara on 58 foot long boat for 8 years looking for the next big rock to visit ----- Perception is every thing

[@moose6042]

Very educational and entertaining channel.. have you heard from Chris since he left for home??

[@hawks2252]

Chet mentioned a few vids ago "hey- just got a text from Chris - says he misses the water we order and nothing else" -haha. i'm sure they stay in touch.

[@8430IVT]

Get an Ellis drill press and annular cutters for the big holes.

[@bobfaris7541]

When using automatic vacuum I move all the chairs out of the way. Cuts the amount of time it needs to run. Shake out the rugs and roll them up. I use them to block where I don’t want it to go.

[@craiggilbert7197]

You guys kill me😂 Eric and chet are like brothers.awesome video!

[@VADogHunter]

I bought 1 a couple years ago, it worked so-so in the house until it quit charging. $350 down the drain. Wife was happy for about 5 months.

[@roneibling9154]

Hi guys. We’ve had one those similar for just over year. It should set or you set boundaries. For carpet the water pads should pickup & it sweeps carpet. Ours does really well on carpet, you shouldn’t have to touch it except keeping it clean.

[@rustynail2205]

Easy to wash the harvest mud out with that spacer gap. Always thinking ahead at Larsen Farms. 😉👍

[@clayellison8168]

Tack the parallel arms together before you drill and then grind them apart when you are done. Makes it easier to keep them all lined up.

[@scotmayall3067]

Ol Brodi needs to be wearing the Larson Farm banana hammock n flip flops while washing those tractors 😂😂😂😂😂😂

[@phillipdickinson8557]

Chet Dougo Eric Broodie great job I don't no about that robot vacum don't think it has a place at the farm so we are going to have to think about maybe the shop it is fun to watch if all you have time to sit around and watch it.

[@tedheierman1181]

Use a little wheel bearing grease to hold the shim and washer in place while installing them.

[@marionberry6909]

The robot part was very entertaining.

[@wheel227s]

You need to add a pilot hole just larger than the web of the drill bit and your large holes will drill much faster!

[@curtisanderson1830]

that's a good idea. prewash the floor before the AI self washing gadget. It's like washing dishes before loading the dishwasher

[@Sword-Shield]

Gotta keep the wife happy...True statement. The rest of the statement goes...if you dont...somebody else will😮🤣👍🎯✌👀

[@rossy83]

Been sub'd here is a comment and a thumbs up. Y'all are entertaining!

[@dinkusdorkus2737]

If that’s the Roborock robot vacuum/mop, depending on the model, you might be able to get the dock that will automatically wash the mop pad and refill the water. For the direction that it travels it will alternate directions if you have more than x1 Cycles

[@roneibling9154]

Ours runs so long then goes home to empty & clean out then comes back out again. It does this at least 3 times during a clean. When ours runs it’s usually 2 hours.

[@crowther840]

Keep up the good work

[@JohnJ-q5j]

It is chilly at night here in AZ in the winter time so I got me a BIG SWEEDE hoodie, Sacred Manure I am Pleased with the quality and it sure is warm,

[@dsmreloader7552]

AgStorm Equipment for kickers to keep your 2 track wheels from losing paint..

[@bobhayes4112]

As a prior John Deere repairman, please use your feedhouse stop I have seen the feaderhouse drop to the ground in less than a second

[@bluejeeper1]

Not sure if you read comments or not but if so, I would check with the person who did your ceramic coats as you may need to go to a different soap than you had previously been using for equipment. Pretty sure that they need to be a very low PH or it will significantly lower the life of the coating. I would suspect that your foaming soaps are strong to break thru the grime. My car is ceramic coated and the installer emphasized that they needed a certain soap.

[@AC-er6vz]

We had a Roomba, we left the door open it went out the door and into the wet yard. That was a mess to clean up.

[@curtisparker3057]

You mentioned in the last video you're upgrading planters and have to do some plumbing on it. As much as I like to watch you struggle, do yourself a favor and get some 300 Degree Plumber's Grease. We get ours at Menards. Lube up the hose barb and the inside of the hose and it'll go together really easy. You'll thank me later.

[@dennishill3463]

👍 Thanks 😊

[@joegotz1971]

I noticed the Gearinghoff corn head. I saw a video of a Claas combine with a 12 row corn head moving at 7 mph. I was really impressed. I think you will find that corn head to work really well come fall.

[@gregjames5070]

Since they’ve already ran it for two seasons I’m sure they know.

[@joegotz1971]

@@gregjames5070 I watch a lot of their videos. I’m surprised I never noticed. It must be the view from the combine that I never get to see the corn head. I better start paying attention!

[@cw93711]

They have used it for 2 seasons now. Lol

[@joegotz1971]

@@cw93711 see above, you don’t really see the corn head from the cab view. Well any way it will work better next year when I see it!

[@Mike7478F]

That was fun

[@steveneal2706]

great video guys

[@lucaspollard3968]

Ive nevered said this to a guy but thats some good looking hair.....