Simple procedure for removing the governor on any 196/212cc OHV engine http:/www.gopowersports.com joesminibikereu... MUSCLE MINI BIKE BUILDS PAGE / 2189033451367398 Follow us on Instagram @muscleminibike www.instagram....
Пікірлер: 45
@kiheirc31954 жыл бұрын
I love the no bullshit music blah blah perfect video thanks buddy just subscribed Randy from California
@MuscleMinibikeBuilds4 жыл бұрын
Thanks for the support 😎👍🇺🇸
@jaylencorbin32843 жыл бұрын
Instablaster.
@roywalls55952 жыл бұрын
Thank you sharing this video!!💯
@Deucealive754 жыл бұрын
This is funny because this is the best way with not too many views for this video. Other not so good ways have tons more views for those videos. This makes it possible for those who are new to this to go with the not so good methods. Also, people who are new to this do not want to pull the flywheel. They do not have torque wrenches let alone know how to keep the crank from moving while torqueing the nut. Even the "KZbin stars" will ram the flywheel nut home with their electric impact and call it good.
@roywalls55952 жыл бұрын
Thanks again info! I am thinking getting a Amigo Dragster 200cc Trike and it got a speed limits on it!
@PatrickHRoss4 жыл бұрын
Thanks for the vid
@CHICAGODUMB2 жыл бұрын
great video !!
@1digitalwatcher6975 жыл бұрын
YEP 4:25 seen in other video someone did same thing. That soft copper will seal.
@witosarlaw Жыл бұрын
Mantap bang
@CDXLIV4442 жыл бұрын
Nice!
@safetyfirstintexas2 жыл бұрын
that top hole can be tapped and a line put on to drive a pulse fuel pump
@silveradonationflychev49493 жыл бұрын
Do you have a video of what you did to the governor arm since you removed the arm. For the throttle??? I need help
@MuscleMinibikeBuilds3 жыл бұрын
I make a piece of linkage if your running the stock style carburetor, if you go to a mikuni you don't have to
@williiamjames36793 жыл бұрын
Can i send you my engine to do i can not find any good as you
@MuscleMinibikeBuilds3 жыл бұрын
Sure, let me know what you want done
@JNC19733 жыл бұрын
Muscle Minibike Builds what State are you in ? I have 196cc Minibike and just got the Stage 2 upgrade kit in the mail today. I put the new Air Filter on. Put new Header Pipe on. Put new Carburator on and went to start it up just to see how much of a difference in Power those 3 things would make. It started up and I could tell it had more power right away cause the bike was trying to pull away without me on it lol. But something is wrong cause it stalled out like 10 seconds after starting it. I kept trying over and over and over and same thing keeps happening. It won't stay running for more than about 10 seconds each time I start it. As soon as you go to give it gas it dies out. This is my first time doing this so I don't know if it's something simple or something difficult. Have you ever seen this happen before ?
@MuscleMinibikeBuilds2 жыл бұрын
Phoenix AZ
@gregstimple8678Ай бұрын
Took the governor gear out from inside.Do you think the pressed in pin could d some out.
@Cereal_Killr Жыл бұрын
What if you just tap gear off the crank and leave the rest in place? Safe?
@MuscleMinibikeBuilds11 ай бұрын
You could but at that point just gut the entire gov assembly
@flip_flop_farmer4 жыл бұрын
i did this now i have no compression and it wont start i think it has to do with the 2 round valve things that go up and down do they have to b in a certain position and i lined the dot up with the other dot
@MuscleMinibikeBuilds4 жыл бұрын
Did the cam come out when you took it apart and the lifters fall out of there holes?, you have to make sure the cam is back in the proper position the lifters are back in their holes so the pushrods are connected through the valve train it sounds like it came apart and now the pushrods or probably not hitting the Rockers pull the valve cover and make sure everything's the way it should be because if the pushrods dropped at a place they would have fallen out from underneath the rocker arms and basically the whole thing is not as it should be when you put it back together got to start with the basics first
@transportesromo3 жыл бұрын
How do you set the cam back to the proper position?? Thanks
@ninoreeves77023 жыл бұрын
@@transportesromo line up the dots on the edge, it could also be a little slot.....
@franksantarcangelo60143 жыл бұрын
I jus removed the governer gear in my MB200 an now it won’t run so I’m watching videos to tryin learn wear I went wrong 😑
@MuscleMinibikeBuilds2 жыл бұрын
Did you have the cam out, and if you did when you put it back in did you line up timing marks
@SchmityFPV5 жыл бұрын
You don’t have to cut the governor arm down, everyone I’ve seen said you had too but I just spun the crank abit. Otherwise nice video.
@MuscleMinibikeBuilds5 жыл бұрын
Almost every time you do if you do not have the the crank out, however sometimes you can get it out without cutting it with crank installed it just depends on the tolerance's of the motor since there is a lack of inconsistencies in build quality...
@SchmityFPV5 жыл бұрын
Muscle Minibike Builds Figured I’d just add it for others, Just Incase someone doesn’t have tools to cut it. On my hemi and Non hemi builds I got away with not cutting either.
@laurapetralia99715 жыл бұрын
👍
@portercole27983 жыл бұрын
How do u hook up the throttle after?
@MuscleMinibikeBuilds3 жыл бұрын
I make a simple throttle linkage from the existing linkage rod back to the throttle arm
@imtrolling50594 жыл бұрын
Have you had any leak issues not threading that governor hole before putting the bolt in? I don’t know about it self threading. Thanks
@Deucealive754 жыл бұрын
He went all the way with the loctite and copper washer. This will never leak. This method is nothing new and has been used by people who know what they are doing for years. You could tap the threads in if you want but it is not necessary.
@imtrolling50594 жыл бұрын
Deucealive75 cool I didn’t bother to loctite the governor arm hole, the bolt was incredibly tight. I did loctite the governor hole. No tapping, just self threading screws. This is my first time opening an engine case. Thanks for the reply!
@Deucealive754 жыл бұрын
@@imtrolling5059 Ok cool... Best of luck with your engine. Hope it runs great.
@MuscleMinibikeBuilds4 жыл бұрын
No issues at all, I've done over 100 motors this way, never leaks
@mc44924 жыл бұрын
Airline mechanics do this all the time. It’s fine, just fine..Aluminum is nice and soft..
@1086Israel4 жыл бұрын
Hi everybody! I just removed the governor but my bike now wont idle it just takes off
@MuscleMinibikeBuilds4 жыл бұрын
How did you reconnect your throttle?
@1086Israel4 жыл бұрын
@@MuscleMinibikeBuilds fixed it but thanks for the reply
@kushbmx99284 жыл бұрын
I need some help I have the same issue how did you fix it?
@exversee58912 жыл бұрын
I removed my govener and I lost speed 🤷🏻♂️
@MuscleMinibikeBuilds2 жыл бұрын
Not possible unless yor engine is having other issues