I need a gun like that . Thumb up Gunman l have learned a lot from you .l have been doing bodý since l left school did a course in painting at Sherin Willams in Jamaica ,but did not follow up on it. Came to the United State in in 2014 September .l quickly realize l need to be able to paint, l was'nt going with any thing much ,but lwould spend some late nights at a shop where l would learn how to mix the paint and the clear ,within four week l was given the gun to lay on the paint and the boss did the clear .l left that shop early November the same year . The next shop l went to l was tossed into the paint booth right man l was nerveious reck ,you had all the answers to the questions l would ask as in how to set the gun ,how to apply the paint and the clear . Brother you videos are really help full you hide nothing. Thank you very much.
@TheGunmanChannel2 жыл бұрын
Awesome man. So cool to hear your story. All the best.
@deacdaniel64253 ай бұрын
Hi, which do you recommend, devilbiss gpg 1.4 or ani f160 s clear ? Thank you!
@deacdaniel64253 ай бұрын
?????
@Palmeys10 ай бұрын
Just wondering, what psi do you spray high build primer on the 1.8? And do you go wide open trigger? And thanks for the video you made me buy it.
@seanhaydock90203 күн бұрын
Im a beater dabbling into paint ive been using an flg5 for a couple years now would this be a good upgrade from that as im starting to enjoy it alot more than beating
@gsigeneral2 жыл бұрын
The caps aren’t all Interchangeable, I bought a different cap and it didn’t fit over the 1.8 fluid tip LOL extremely disappointed. As the caps cost over £100 alone. This should be stated on reputable websites. Now promoted to polyester prime,.(wood finisher) the Un even build up put me off. For a gun under £200 it does feel nice. I like the shape feels a touch oldschool. Nice weight. I thought they would have rectified this as it looked like devilbiss played with air delivery by adding metal tunnels.There is a sweet spot to not getting bent build up. I also had this issue with the pri pro lite. Pr10. I’ve now gone back to the trusty HD advance. Big up gun man learnt a lot over the years💪🏻🤘🏻
@mwoolston1002 ай бұрын
I purchased the devilbiss gpg spray gun and it came with a gpg2 cap. I can’t get the fan to adjust higher than a 4” fan. It does a fairly poor job of spraying. I used it once and went back to my older Concours gun. I’m spraying base with a 1.5 tip and have the input pressure around 26 psi. I’ve tried and tried to get it setup but nothing works. I sent a message to Devilbiss but have heard nothing. The gun is worthless to me the way it is and I’m looking for help to get it setup! Thanks, Mark!
@rickhambric97374 ай бұрын
Just picked one up with a 1.8 & 2.2. Spraying urethanes, polys, and thinned gelcoat for repairs.
@Stingyduce4 ай бұрын
Same I got the smoked out black version 1.21.31.4 tips
@JohnWD40TC022 жыл бұрын
At the end of the day it's a Devilbiss so what more can you say, you get an all rounder which will lay practically any paint you have plus you are getting the reliable GTI Pro quality which is a win win in my book, thanks for doing this video Gunny and the finish from the GPG is what you would expect from a top of the range Devilbiss. It will be great to see the gun in action on your RAW channel mate as I've been missing your daily uploads Gunny but I'm sure you are busy and cant always do them, just hope you are ok and keeping well Gunny, stay safe 🙏👍 John UK.
@murrayguitarpickups95452 жыл бұрын
I used an old Gti through my whole apprenticeship on everything except high build primer. It never faulted me it was consistent and I preferred it over the more expensive guns because it was more familiar
@Ncvl75 ай бұрын
What do You mean “comparable” with Pro Lite? Which one is better for clear coat?
@captrans2 жыл бұрын
i recently picked up a gpg 905012 in usa for 230 with 1.3, 1.5, 1.8 nozzles and i got a te20 air cap right away. I honeslty was blown away on the smooth finish at 29 psi, very slight orange peel. Comparing to other panels on 14 grand cherokee it was smoother than chrysler factory finish
@dictator40cal2 жыл бұрын
Hey Gunman!! if you had a choice between 4 of these guns GPG, LPH400, W400 or FLG what would you buy. Looking for a nice flat finish type gun. i trust your judgement. In the market for a new base and clear gun. Thanks in advance and i watch all your videos. Huge fan brother!
@jamesbigica375 Жыл бұрын
lph400 not even close just do it
@mitchellferre16522 жыл бұрын
Sometimes I think my GPI is going to last forever ! 👍🏼😊
@santogervais43432 жыл бұрын
Best overall gun for me is the tekna pro lite
@TheGunmanChannel2 жыл бұрын
Hard to beat
@conrad42592 жыл бұрын
Nice work as usual 👌
@Mufasa1v1er2 жыл бұрын
Thanks for the quality gunny!
@andrewtraylor3145 ай бұрын
I know this is an old review and you aren’t likely going to see my question, but how would you rate this vs a pro lite. Is it really worth the extra money for the pro?
@TheGunmanChannel5 ай бұрын
If you're playing from home GPG would suffice, but I would prefer the extra tip and air cap options if you're a daily painter. Plus you get lots more use out of it which makes the extra money justified.
@epicasmasher5504 Жыл бұрын
Good job primo número 1
@raphaelschwarz30022 жыл бұрын
Does anyone know if the Nozzles and Needles are interchangeable between the GPi and the GPG? Or more specific could i buy the 1.3 GPG nozzle and use it on my GPi?
@bluewanderer99032 жыл бұрын
Interesting I was thinking about this too. Let me know if you find out, i will report the back if I do.
@TheGunmanChannel2 жыл бұрын
I would almost guarantee that you could. The gun even says (formerly GPi) on SprayGuns Direct website. Just keep in mind the needles don't fit all tips. So the 1.6-1.8 share a needle and the smaller ones will share a needle also.
@bluewanderer99032 жыл бұрын
@@TheGunmanChannel thank you 👍
@Near2Future2 жыл бұрын
I'm looking to paint my motorbike wheels, fender & swingarm. Maybe a car bonet & bumper in future. What would the best air gun be for me? Abac Montecarlo OS20P Hp 2.0 50lr tank Air intake volume 230lt/ min 9bar CFM 8,1 (I’m guessing it’s more like 6)
@damensutherland70812 жыл бұрын
Ever use pressure fed
@TheGunmanChannel2 жыл бұрын
I haven't.
@brandonponticelle2 жыл бұрын
I asked Spray Guns Direct if you can use the GPG 1.3 needle/nozzle on the GPI............NOPE! 🙄🙄🙄🙄🙄🙄
@ibrahimalmotawa9672 жыл бұрын
Gorgeous work and painting.
@Veggedoutman2 жыл бұрын
Useble gun! But I prefer Hvlp guns with material economy last time. What could you say about new TE25 cup, some review?
@davemcarthur3018 Жыл бұрын
Hey mate. Thanks for the info and tips. I bought myself a GPG and am loving it. My dog better watch out 'cause I'm looking for more stuff to paint😉. Cheers
@hotrodchris8052 жыл бұрын
I can't understand the mixing scales o the pps2 cups. How embarrassing! I can't find any guidance anywhere either. Any ideas? Thanks as always for the great reviews. Learning a lot here! Edit. Sussed it now!!!!! Pretty similar to other mixing cups, just some more markings.
@Mechaniclyfe2 жыл бұрын
I recieved a gpg spraygun gun instead of a tekna primer (discontinued) , the tips here in the US we can get up to a 2.0 tip.
@vicsim81632 жыл бұрын
Hi Gunny in have the GPG with a 1.4 GPG1 air cap, want to get a 1.3 fluid tip and needle, is the GPI fluid tip and needle the same and fit the the GPG with GPG1 air cap?
@walterwalters30692 жыл бұрын
This is the same gun body and parts as Gti pro, Tekna Pro, Cooper, and Tekna Base. I have all of them and I know how they are. Now just more air caps there.
@TheDoug99012 жыл бұрын
looks like an old plus gun I would bet all parts would fit across. Have an old JGA put plus gun parts into it and used it as a pot gun when I did trucks. Prolite way better more efficient
@marksimister90182 жыл бұрын
Great videos, appreciate the effort and knowledge sharing. I’m just starting out with spray painting……project cars! After your reviews (plus others Including paint society) I’ve settled on getting a GPG. If I want to use it for primer, base and clear, other than getting needles and 1.3 and 1.8 fluid tips……do I also need to get the PR10 or PR30 air caps to do primer? Or can I get away with using the GPG 1 or 2 air cap? Sorry if a dumb question…….thanks
@orlandofigueroa60392 жыл бұрын
Hello Gunman I am interested in getting a good spray gun and I have seen many videos where the gti is my option but I saw the GPG and I also liked it what do you recommend?
@travisbacon55272 жыл бұрын
Hey mate loving the videos. About to order an flg and a few fluid tips from the uk store. I was wondering if you have any promo codes? 👌
@ozjado Жыл бұрын
If I already have the gpi with a 1.4 and a 1.8 would you agree there is no need to get the gpg?
@looper4512 жыл бұрын
Only in Australia can you fry an SD card because of the heat!!! Lmao!
@luisenriquez58352 жыл бұрын
Hello I have a question what's the adapter number for the liners
@Ammar-ku4yx2 жыл бұрын
my air compressor is 60 gallon with 40cfm
@NYCENESS_FDA2 жыл бұрын
Hello...can you tell the number of the 3m pps 2 adapter please.
@bryantchatman58062 жыл бұрын
I see that the gpg has like 3 different air caps . Could you do a review??
@danielcaskey2 жыл бұрын
What's the preferred cap and needle size for the GPG on fine woodwork?
@gavinmeikle_042 жыл бұрын
Thinking of getting one, total beginner and hobbyist. Thoughts on me getting this gun with all three tips?
@nikolaefremov8810 Жыл бұрын
Can someone tell me where they manufacture the GPG?
@volodymyrg93002 жыл бұрын
Hi with one is better DV1 or GPG. Thanks
@AaronR15 Жыл бұрын
Gunny, is it worth spending $100 more and getting this gun setup with 1.8 and 1.4? Or should I get the FLG-5 with 1.8/1.4? I already got a GTI Pro Lite 1.3 T110 for clear, so I’m just looking for a single gun k can use for primer/base.
@TheGunmanChannel Жыл бұрын
I would say this gun is either the extra money, the fan is a bit bigger and the build quality is a bit better.
@jeffeaton52212 жыл бұрын
I use a 1.6 tip on my GPI for metal flake .004 micro & .008 mini size.
@ysr789 Жыл бұрын
how it compares to flg5
@wardbros12 жыл бұрын
What wasn't explained was how to identify the NEW GPG. With 4 possible GPG guns available how do you identify the latest GPG. I've seen companies trying to sell off GPG guns that could be potentially 5 years old. And without an explanation of how to pick the right GPG how would the average person actually know what there buying.
@TheGunmanChannel2 жыл бұрын
Exactly, and the more I say the more I confuse myself. Just go to spraygunsdirect.co.uk and see they have the old models, GPi, PRi pro lite etc. They have the old model names in brackets. That's all I can say, the naming is absolutely insane. spraygunsdirect.co.uk/?s=Gpg&post_type=product&dgwt_wcas=1
@Ammar-ku4yx2 жыл бұрын
my friend you gave big confusion about the spray guns please tell me what gun is good to buy flg5 or flg-693 or gpg iI asked before but you never send me a feed back. thanks
@TheGunmanChannel2 жыл бұрын
The best of them is GPG (formerly GPi)
@SpeedandChromeTV2 жыл бұрын
Have used the GTI 620G for 20 years, really great gun.
@vintagespeedshop2 жыл бұрын
The gpg also do a 1.0 ,2.0 and 2.5 tips
@egilaastrm48832 жыл бұрын
Hello Gunny! I dont know if You had mentioned it.. But did the GPG small needle and tip fit to the GPI? I have a GPI with 1,4 and 1,8. But I miss a litle smaller tip than the 1,4. Keep on the good work!👍
@GRIFF20852 жыл бұрын
I was wondering the same thing, hopefully we can get a reply 🤞
@topgunpressurecleaning89302 жыл бұрын
Is the gpg 905015 a good gun?
@husky12392 жыл бұрын
Nice job thank you for the review gunman stay safe
@SalvageMasterEssex2 жыл бұрын
Top Notch finish on the Audi mate 👍👍
@bensonporter1384 Жыл бұрын
U think 1.4 is overkill with the devilbiss gpg for base and clear???
@TheGunmanChannel Жыл бұрын
It's a good option in summer, 1.3 for winter
@curtispooler64972 жыл бұрын
I have one now have to get the 1.3 and try that
@OnsiteWelds Жыл бұрын
What’s the number on that 3M adapter? I can’t find it on their page Thank you.
@TheGunmanChannel Жыл бұрын
S15 pps2 or 15 pps1
@HaydenK19982 жыл бұрын
Have you tried the new 1.3 setup in the old GPi gun? Do you know if they fit and spray properly?
@GRIFF20852 жыл бұрын
I was wondering the same thing??
@ethurajann58542 жыл бұрын
Iam in India Tamil Nadu Dt
@nashcodm28312 жыл бұрын
Need to see 1.2 tip review
@classicvolvorestorations38489 ай бұрын
I have the old GPi 1.4mm due to your recommendation and currently got a old classic I’m restoring so want a flat finish with minimum orange peel so going to get a 1.3mm fluid tip. I think the fluid tips are the same as the GTi pro and pro lite ‘pressure’ guns, would you know if the GTi pressure T110 air cap would fit? Or should I just stick with what came with the gun? I assume the GPi cap is similar to the TE10 cap?
@АлександрЧайка-и5б6 ай бұрын
К сожалению не подойдёт, у меня есть gpg и 110 и центральное отверстие совершенно другое и будет другое наполнение факела.
@АлександрЧайка-и5б6 ай бұрын
А если поставить сопло от gti pro lite то игла будет нужна от этого же краскораспылителя а её нет.
@darthvader84332 жыл бұрын
Would the 1.8 GPI/GPG be suitable for spraying Line-X bed coating? Or is that too chunky to go through it? Amazing the GPI design has stood up over time so well!
@TheGunmanChannel2 жыл бұрын
I would usually use a body deadener gun for bed liner. I guess you could use a 3.0mm gun. But I wouldn't even try a 1.8
@Thatguy-dk8zm2 жыл бұрын
Hey gunny are the fluid tips interchangeable with the gpi.
@TheGunmanChannel2 жыл бұрын
I haven't looked that far into it but I would imagine so.
@sajh42802 жыл бұрын
Lovely job mate❤️
@TheGunmanChannel2 жыл бұрын
Thanks mate, hope you've been well.
@sajh42802 жыл бұрын
@@TheGunmanChannel been good mate hope u keeping well.done a few jobs with Ur gun ,they came out great ,not as good as yours tho but getting there lol😂
@markbarton43442 жыл бұрын
Nice gun for the price for sure.
@eviljoker3032 жыл бұрын
So if I want the one you are using,how can I tell I’m getting the right one?Is that one the former “GPi” version?
@TheGunmanChannel2 жыл бұрын
Yes, that's the right one. So stupid how they've named them
@bluewanderer9903 Жыл бұрын
@eviljoker303 did you figure this out? They now come with these aircaps: GPG1 (high efficiency), GPG2 (hvlp), C86 (conventional), C30 (conventional) and PR10 (high ef primers). Which one of these is former gpi? In one of his previous comments Gunny mentions setings 15psi primer, 20psi base, 29psi clear, that to me looks like gpg1aircap.
@turbora28 Жыл бұрын
Hey sorry to dig up an old video here. But any recommendations on the psi to run for single stage with a 1.3mm tip? Pretty inexperienced and trying to get best possible outcome with this gun. Cheers!
@TheGunmanChannel Жыл бұрын
Start at 30psi and adjust as necessary
@turbora28 Жыл бұрын
@@TheGunmanChannel thanks mate! Also any guide on fluid starting point? I've wound out 3 turns from fully closed. Feels like a bit much fluid.
@TheGunmanChannel Жыл бұрын
@@turbora28 if you're unsure start at 2.5 turns out and adjust as needed
@PhillipHall012 жыл бұрын
Do you like this better than the DV1? Thanks for the video... Phillip Hall
@TheGunmanChannel2 жыл бұрын
I wouldn't say it's better, but it's more than competent. A good mid-range price but well made and performs well
@PhillipHall012 жыл бұрын
@@TheGunmanChannel Thank you !
@watchthisspacecarchannel65232 жыл бұрын
That’s a damn nice finish 👍
@lilearlus47112 жыл бұрын
Try it using the 7e7 air cap
@stevemcmahan517 Жыл бұрын
Ive heard thats the way to go for clearcoat. Does it drop the cfm to 9.5? @ 29psi ?
@powerserge26242 жыл бұрын
What # pps adapter on it?
@TheGunmanChannel2 жыл бұрын
S15
@ethurajann58542 жыл бұрын
How I will get it sir ??
@TheGunmanChannel2 жыл бұрын
There's a link in the video description. They ship worldwide
@ethurajann58542 жыл бұрын
@@TheGunmanChannel Thanque sir !
@nightmissioncustoms2 жыл бұрын
Glad to see you revisit the GPG! I recently bought a GPG here in the US and experience the same uneven primer buildup on the air cap. No amount of adjusting seemed to make any difference. I use it exclusively as a primer gun and find it worse with the higher-build primer surfacers than the epoxy primers. Kinda learned to live with it. Where have you found your GPG happiest on air pressure range? Thanks agin for another great vid!
@sammybromage71142 жыл бұрын
I’ve had that exact issue too on my gpg; strange everyone I spoke to that has one of these has the same problem
@TheGunmanChannel2 жыл бұрын
At least you can't fault the fan. I guess I can overlook it being a budget gun. I have been running 29psi for clear, 20 for basecoat and 15 for primer
@DETAILINGLAW2 жыл бұрын
Thank you my man. I wanted to get a dedicated primer gun for my DIY projects and was actually researching what will be value for money for me. Now that you’ve recommended it, GPG is what it’s gonna be! Just trust your opinion! I think I’ll get the 1.3 as an extra so I will be able to use it as my wet on wet primer too. Very very intuitive. God bless
@TheGunmanChannel2 жыл бұрын
@@DETAILINGLAW just don't forget you will need a different needle and fluid tip. You can't just use the same needle for 1.3+1.8 good luck man 👊
@DETAILINGLAW2 жыл бұрын
@@TheGunmanChannel thank you Gunny
@chipschweiss2 жыл бұрын
This video sold me. I bought the GPG. Can anyone tell me which 3M PPS Series 2.0 adapter works with this gun? Noone seems to have their application chart updated for this gun.
@TheGunmanChannel2 жыл бұрын
It's same as all DeVilbiss S15
@davidharrison83972 жыл бұрын
Another killer job. I'll be buying this gun ....just received my new flg 5 and ani F160 gun's from spray guns direct.
@ysr789 Жыл бұрын
which one is better
@ysr789 Жыл бұрын
flg5 or f160 or gpg devillis
@robertkistler32102 жыл бұрын
What do you think about the flg5 vs this gun is it a knight and day difference? Thanks man and I love your videos I’ve probably seen them all lol 👍👍👍
@mitchellferre16522 жыл бұрын
The flg5 is a nice gun but it's cast aluminum instead of machined like the gpi/gpg. They both spray clear really well. It's when you are spraying difficult metallic like silver base coat there is a difference between the two. Gpi has slightly better atomization. Just my experience with them. The gpi will last much longer than the flg5.
@robertkistler32102 жыл бұрын
So if you were to pick 3 guns one for primer.one for base and one for clear. kind of on a budget which guns would you pick. gpg. Flg5. iwata bellaria? I’m just starting out and just want to make sure I get something decent👍 thanks man
@mitchellferre16522 жыл бұрын
@@robertkistler3210 I would go flg5 for primer and gpi/gpg or iwata bellaria for base/clear. I have both the gpi and bellaria and get top notch results from both. Factory finish or better right off the gun. I only wer sand and buff when I get trash in it.