GR COROLLA | RacerX PITCH MOUNT UPGRADE (Slick As Butter!)

In this video I will show you the process of changing the pitch mount on a Toyota GR Corolla. The GR Corolla has been found to have a poorly designed OEM pitch mount and mine felt fine but was torn when I removed it.
I found this upgrade to be a nice upgrade in shifting feel over the OEM pitch mount and my GR Corolla shifted great, now it shifts even better! I highly recommend doing this upgrade.
🎤 FOLLOW MY SOCIALS 🎧
📶 Instagram - JimsGarageToys
📶 Facebook - JimsGarageToys
Please ask any questions, comment, and share my video to others! I appreciate your support and help to see my channel grow.
RacerX Pitch Mount - racerxfabrication.com/corolla...
GEARWRENCH 1/2" Drive Torque Wrench 30-250 ft/lbs - amzn.to/3xYtDvh
GEARWRENCH 3/8" Drive Torque Wrench 10-100 ft/lbs - amzn.to/3UlakUr
22mm 1/2" Capri Deep Impact Socket - amzn.to/3QqdOUr
17mm 3/8" Capri Deep Impact Socket - amzn.to/3QnxIzs
My GR Corolla Mods:
Flow One F6 Wheels Gunmetal 18x8.5 +30mm - www.tirerack.com/
Well Visors Rain Guards - amzn.to/461yaKv
Type B Rear Spoiler - www.ebay.com/itm/184668502837?
Carbon Fiber Lip Splitter - amzn.to/4cEozM5
Carbon Fiber Side Skirts - amzn.to/3zAHvg0
Carbon Fiber Rear Spats - amzn.to/3xW9IgV
OE Type Spoiler Option - amzn.to/3WoHW6h
Mid Spoiler - amzn.to/3W4108v
Rally Armor Mud Flaps - amzn.to/4f1W4tc
Door Sill Protectors - www.oempartstoyou.com/
3D Maxpider Floor Liners - amzn.to/4bEhOZf
CF Front Splitter Lip - amzn.to/3Ll9hzM
CF Side Skirts - amzn.to/3zAHvg0
CF Rear Spats - amzn.to/4d0B4Bc
Ultra Bright LED Reverse Bulbs - amzn.to/3Lo1LUR
SXTH Armrest - sxthelement.com/products/coro...
Armrest Short Base - sxthelement.com/collections/2...
Front 15mm Wheel Spacers - amzn.to/3S5k8Sh
Rear 25mm Wheel Spacers - amzn.to/3WnhiL5
iMT Fix - amzn.to/3S6Sy7k
Tom's Door Panel Protectors - www.apexi-usa.com/collections...
Stupid Car Tray - amzn.to/468PKft
FITCAMX 4K Dashcam - amzn.to/3VXzdGC
Door Handle LED Lights - amzn.to/3W6CDH0
Battery Tender - amzn.to/461eK8t
Passenger Under Dash Fan Cover - Toyota Part # 55607-02280
Vellossa Tech Ram Air Intake - www.velossatechdesign.com/pro...
Matte Forged CF Pieces - grmods.shop/collections/carbo...
Radium Engineering Oil Catch Can - www.radiumauto.com/Catch-Can-K...
Radium Engineering Master Brake Cylinder Brace - www.radiumauto.com/Master-Cyli...
Toyota Premium Horn Kit - amzn.to/3S10BlN
Hood Insulator - Toyota 2019 - 2021 Hood Insulator (This One Fits) - 53341-12380
Beat Sonic PA2T3K/ENA2T3 Amp Kit - www.beatsonicusa.com/ena-2t3....
RacerX Pitch Mount - racerxfabrication.com/corolla...
RacerX Short Shifter - racerxfabrication.com/corolla...
RacerX Spherical Bearings - racerxfabrication.com/corolla...
Rocker Panel Letter Inserts - www.etsy.com/listing/17164403...
Reverse Light Bulb Upgrade - Fog Light Bulbs - amzn.to/4bRS9wO
GR Knob - www.etsy.com/listing/17234414...
Rocker Panel Decal - www.etsy.com/listing/16844882...
Modern Spare Compact Spare Tire - Fits 2023-24 GR Corolla - amzn.to/4duRD9E
Electronic Deer Whistle - amzn.to/4b6Af9G
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!

[@timomcrodriguez1797]

One day. I will get my gr

[@jimsgaragetoys]

It's not that hard now. I hear of people that just decided to start looking and get one within a week or 2 at MSRP and sometimes less.

[@not12listen]

I'm definitely going to be upgrading the pitch stop mount for my GR Corolla. But, more importantly, we need to see more of that wonderful AW11. :)

[@jimsgaragetoys]

I hear you!

[@Vaesive]

Perfect timing because I was planning on installing mine this weekend!

[@jimsgaragetoys]

Nice timing!

[@GRC316t]

Always great videos 🔥

[@jimsgaragetoys]

Thank you! 🙂

[@bbb4019]

Obviously having a proper lift makes this an easy one. I did this on ramps and took me over an hour! Torquing that one bolt to 150 took some maneuvering laying on my back haha U gonna love those spherical bearings btw. Did those and their short shifter at the same time and what a difference it made.

[@jimsgaragetoys]

I will say I love having a lift. I've worked on cars for many years on jack stands and then under a QuickJack for many years. I can't imagine torquing the big bolts on jack stands though!

[@thatGRprick]

So I’ve changed mine with the Cusco one. It does have more nvh and the stock motor pitch mount seem to be damaged just like yours.

[@jimsgaragetoys]

From what I've learned the area that appeared torn is actually not torn and designed that way. It's just the extra rubber from the mold when it was made. The RacerX 60a that I installed is still a nice upgrade though so I'm happy as I don't notice any NVH at idle but there is less engine movement when shifting.

[@yilizhang5857]

I wonder if anyone has 3rd gear grind on the grc , and does this pitch mount fix the problem?

[@jimsgaragetoys]

I don't think that this pitch mount will perform any differently than any of the other brands in the 60A firmness. The question should be, are you getting the gear grind because of a bad pitch mount on your car? If so then maybe this will help. If you drive it pretty hard and/or track it get at least the 70A.

[@larrywalker2888]

How about the skid plate for gr corolla? It is also made by racer x.......

[@jimsgaragetoys]

Yep, I'm looking at that too. I would like to get one down the road.

[@breaks_n_stuff4049]

Why did you go with the racer x opt vs others on the market?

[@jimsgaragetoys]

I was ordering the short shifter and spherical bearings and I knew that I wanted to upgrade the pitch mount at some point. Well, there was a sale and it was less expensive with the deal for all 3 items so I just said why not. Many have said that they are all pretty good products. The ones that are having a problem are ones like this 60A when they are being used in harsh racing conditions on the track when this isn't made for those conditions. If you are going to be on the track you need a much stiffer one. I can see people switching out with a stiffer 85A for the track and then back to a softer 60A/70A for street use since they are easy to remove. The quality of it looks and feels excellent.

[@Vaesive]

@@jimsgaragetoys I picked up the 70A with my order as well; any idea how you'd remove the 60A bushing? I'm hesitant to try and knock it out with a mallet...

[@jimsgaragetoys]

@@Vaesive I would guess that's how you do it with a large socket that clears the center. You can always reach out to RacerX with an email and ask the best way. I emailed him with a question and he replied very quickly.

[@murk4545]

Do you think there is any risk of wear and tear with the increased vibrations?

[@jimsgaragetoys]

Good question, but won't with the 60A one as I don't notice any additional NVH even at idle. If one were to use a very harsh 85A the additional NVH could lead to even more noise from it causing more vibrations from parts and panels.

[@michaelsantiago7093]

Hey Jim, How did you know that you needed to replace it?

[@jimsgaragetoys]

I didn’t, but I knew that it had been reported by others as a good thing to upgrade for shifting quality so I had it on my list of things to do. I was ordering the RacerX short shifter and shifter bushings so it made sense to get this at the same time since I could save even more money with the sale at the time.

[@wwilliams1358]

Just wondering if this could be changed out without removing the 4 14mm bolts? Especially since that part of mount is not changed, it would just be a matter of removing the 2 22mm bolts only. With that said, I have no idea how much room is under there. Also, it seems there is no need to support the motor, is that correct? Thanks again for another informative diyer video!

[@jimsgaragetoys]

I imagine it could be done that way too but I think that the reason that it's done this way is because it takes the pressure off of that joint and you then tighten up the other bolts. It's just not a big deal to loosen the 14mm bolts. Try it and see and if it's a pain you can always drop the 14mm bolts.

[@larrywalker2888]

R&R front sway bar?

[@jimsgaragetoys]

Nope, just what's in the video, very quick and easy!

[@UserNameTakenDown]

When cars and coffee? 😬

[@jimsgaragetoys]

I go every Sunday to Orchards Cars & Coffee at Vancouver Mall in Vancouver, WA. If you are close, come on by from 9-11am!

[@grcorollace]

The OEM was broken already 😮

[@jimsgaragetoys]

Crazy, easy to see why Toyota is changing the design and the original part.

[@tyrian869]

That's what everyone says but who's to say that it is broken? I get that it's not connected in one spot but the sides are still connected, Surely Toyota knew about this and decided it was okay

[@tyrian869]

@@jimsgaragetoys oh that's news to me okay, so It isn't normal or acceptable to keep oem one got it

[@jimsgaragetoys]

@@tyrian869 A Toyota service writer told me it was torn as that is the first area to tear since it's taking the forward/backward motion.

[@yilizhang5857]

Many people has complained about it, I wonder if this only affected to 23 model, I got the 24

[@tyrian869]

I'm going back to stock, I think these are just a joke

[@mengx94]

Interesting. Why do you say that? I reverted back to stock with an insert from a cusco. Cusco was too hard-core for me.

[@tyrian869]

@@mengx94 It must be that I just don't have a feel for the difference that others are talking about put over 500 miles on a sixth Element rear motor pinch mount and have only noticed horrible resonate vibrations, especially when backing up, nothing else to me improved

[@jimsgaragetoys]

Well, if you wait for the redesigned pitch mount from Toyota you might be okay but the current OEM ones are the joke the way they fail so easily.

[@jimsgaragetoys]

@@tyrian869 I don't notice any increased NVH with this RacerX pitch mount but that's why I went with the 60A. I do notice an improvement in the shifting when I'm enjoying a spiriting drive but if you are driving easy you won't notice it unless your OEM pitch mount is completely thrashed.

[@yilizhang5857]

I am curious if anyone gets a grinding on the 3rd gear? Is that the pitch mount? My grc currently had 3000 miles, and start recently 3rd gear grinding