Fitting DCC Concepts pick-ups to Teak coaches 22-10-2019

[@tonyhill6296]

Hi Graham, I think this is the best method and so clearly explained by you (Including the ‘mistakes’ is so comforting!). May I suggest that if you tin the pickup spring on the bench, before fitting, you would only need to bring the soldering iron in close proximity to the wonderfully detailed coach twice to complete the two wiring connections? The stay alive board is so useful and neatly installed and as for the interior detailing I’m just blown away and fully expected the passenger to turn the page of the newspaper!Congrats on reaching 10K subscribers. I’m so fortunate to be in that number having found your channel in the last six months. Thanks for all your skill, care and attention to detail that brings your layout and videos to life. You are such a great ambassador for our hobby. Best Regards, Tony

[@francis1247]

Hi, it didn't take that long to go from 9000 to10 000 subscribers, the quality of your layout, your videos, and the time you take to share with us had to be rewarded as well as your kind self. Thank you & Bravo.

[@davehorton946]

Hi Graham A great video i found very use full and thanks very much for taking the time to show it very wel done Cheers Dave.

[@GrahamFoulston]

Dave Horton No problems Dave and really pleased that you enjoyed it. Cheers for now mate. ...........Graham

[@terrylove3247]

Hi Graham, having used these springs for my coaches I found a fault problem. I didn't put the springs on the right way round i.e.the long bit that you solder to was on the insulated wheel side. This caused a short as it went along. It took a little while to suss it out but eventually I saw it, turned the spring around and now no probs. They are a brilliant idea. Congrats to DCC Concepts.

[@GrahamFoulston]

Terry Love Yes Terry, I should have made that clear on the video I guess but forgot all about it, the tang of the pick-up will rub up against the isolated wheel if they are on the wrong way round - as you found out. Cheers for now mate. ............Graham

[@MrKidda66]

Congratulations on hitting 10,000 subscribers Graham! Huge achievement and well deserved - I’ve been following for a few years now and your channel & layout keeps getting better and better. Great variety of videos, brilliant quality, fab content and all delivered in a really lovely way. Keep it up and here’s to the next 10,000!!

[@GrahamFoulston]

Orange Street Music Club Well thank you very much for those really lovely words sir and as always, they are greatly appreciated. I will hopefully continue for a long time yet and you never know, there maybe another 10,000 but I very much doubt it! 😂😂. Cheers for now my friend and thank you for your continued support. ............. Graham

[@FarlandHowe]

Very nice Graham. I’ve done a few but they always flicker at least some. I finally gave up. I used the springs like you have from DCC concepts and their anti-flicker circuit. I have my DCC coaches to keep me company. Brilliant explanation of the process. Easy to understand and clear as a bell. Rob

[@leewhall2504]

Hi Graham. Really useful video for me as I'm almost finished on my station area, just got the lighting to do. But, there's not much point in lighting the station if I'll be running trains through that are in complete darkness (as if they're out of service). So been thinking of a way of lighting the trains and so far, this is my favourite. Great video, nicely explained too. Thanks Graham and all the best, Lee

[@GrahamFoulston]

Lee Whall Thank you very much Lee and as I said in the video, there are other ways to illuminate the coaches and I’ve used most of them but like you, I find these are the best for me but obviously not everyone’s cup of tea. Cheers for now buddy. .............Graham

[@markschumacher6630]

The coaches interiors are beautiful, very nice work. Makes such a big difference. It would be fantastic to put a small camera inside to project onto your 30 inch monitor. Pointed towards the tables and the figures at a wide angle. So much fun to follow along with your progress. So much detail you want to show it off I would imagine. 10,000 nice job!

[@GrahamFoulston]

Mark Schumacher Putting a camera inside the coach is possible Mark as I have done it before although the clarity does suffer a bit though. Yes, 10,000 subs is amazing and something I never thought I would achieve - I still can’t believe it myself. Cheers for now mate. .............Graham

[@BRENTJAMESJACKEWEN]

Hi Graham, 10 K you deserve this mate I have always said that your the King.I just knew that this would happen as your video's were just brilliant and many people have learned a lot from them and that is all thanks to you.Very well done mate.Jim.🌟👍

[@GrahamFoulston]

james Thank you so much my friend, that’s very kind of you to say and gives me more inspiration to crack on and do more. Cheers for now my friend. ............ Graham

[@TRAMJUNCTION7147HG]

Congratulations Graham on reaching 10,000 subscribers, it's a great achievement. Nice to see how you fitted the new axle spring contacts for the coach lighting. They are a great idea for lighting up coaching stock that have steel wheels and axles. Cheers for now mate......................Geoff

[@GrahamFoulston]

TRAM JUCTION MODEL RAILWAY Thank you Geoff, as I said in the video, this is not the only way of course, there’s a few other ways but I like this system for certain wheel sets with insulated wheels. Getting to 10,000 subs is a massive boost - I still can’t believe it yet! 👍🏻👍🏻. Cheers for now mate. ........... Graham

[@trainmanbob]

Well done Graham..10000 subscribers. Have a wee dram to celebrate!! Nice tutorial. Cheers, Bob

[@GrahamFoulston]

trainmanbob I already had a a wee dram Bob and very nice it was too! 👍🏻😉. Cheers for now mate. ...........Graham

[@mandbhomestead]

Excellent video on the installation of the new pickups. Glad that they worked out. The details you have done to the coaches is amazing. Thanks for sharing. Ken

[@medwaypeninsulaMR]

Hi Graham - Well done on the 10k Subscribers and well deserved. The Teak coaches look brilliant with the detailing and now reliable lighting = perfect. Cheers Kev

[@GrahamFoulston]

Medway Peninsula Model Railway Thank you very much Kev, I did the detailing and lighting to those coaches a few years ago now so they are holding up well, I was never happy with my home made pick-ups though so I thought it was about time I corrected them. The 10k subscribers came round very quickly, still can’t believe I have managed to get to that magical number. 👍🏻. Cheers for now mate. ............. Graham

[@martinslyfield5971]

Hi Graham Your attention to detail in the buffet car is second to none like your whole layout, you can really bring things to life, superb and also congrats on your 10k Always look forward to the next update Cheers mate

[@clivebennettHornbyDublo]

Very illuminating and as always very watchable, do you know if it would be possible to put a lamp inside the buffet car double oven and hob could be a first ? !!

[@w.rustylane5650]

I use the ESU current collectors I got from LItchfield Station, part # 50707. For $8.95 + $4.99 shipping you get enough parts to do 8 axles. They mount underneath the bogies and have wipers for each axle. It's best to cut them apart and use one for picking up the positive voltage and goes through the lighting and returns back to the other bogie. Just have to remember that the wheels must have an insulated wheel on one axle on the right and the other must be on the left to avoid a direct short. I don't like taking wheel sets apart. Cheers from eastern TN

[@MFL8378]

That interior is absolutely superb

[@wyvernmodelrailway]

I am genuinely amazed with your abilities. A great video. Wonderful detailing.

[@ralphwest8156]

Fabulous Graham' and great results too' ...well done with the 10,000 subscribers'

[@GrahamFoulston]

Ralph West Thank you Ralph and much appreciated sir. Cheers for now. ...........Graham

[@robstrains8711]

Another great video definitely a must for those new that want to put lights into their coaches. I couldn't trouble you for how to make and what components size wise I will need for the flicker free board. I have been buying them ready made and the cost soon mounts up compared to making your own. Regards

[@GrahamFoulston]

ROBS TRAINS Absolutely Rob which is why I made them myself even though I know next to nothing about electronics. I will have to open a coach up and see what the components are as regards values as I can’t remember what they are off the top of my head right now - I will come back to you and let you know. Cheers for now. ...........Graham

[@normanrowe2831]

Hello, nice job on the install. You are a good teacher. You even showed us what can go wrong. I agree with this method. A little more work than some others, but worth it. Although I don't remember you saying anything about it during the video.....congratulations are in order. Happy 10,000 subscribers! Good show. See ya next time.

[@yorkiepudd7404]

Nice tutorial Graham nice simple easy system and again congrats 10k subs, cheers ken

[@GrahamFoulston]

yorkie pudd Thank you very much Ken and those 10,000 subs were celebrated with a nice glass of malt and another ciggy! 😂👍🏻. Cheers for now mate. .........Graham

[@yorkiepudd7404]

@@GrahamFoulston nice 1 Graham i aint got malt so another cuppa cig but saturday night meal i`ll have a rum for you mate, well done cheers ken

[@GrahamFoulston]

yorkie pudd Good man! 👍🏻😉. Cheers for now mate. ...........Graham

[@markfisher8206]

Congratulations Graham I enjoyed this video as I am current struggling to improve the power pickup on a Mantua 0-4-0 saddle tank switcher.And a struggle it has been! Congrats on 10,000 subscribers!

[@ChapelEndJunctionUK]

Good to see you back doing what you do best , showing your - how to - videos . Cheers........Peter

[@onnomulder9775]

Congratulations on 10,000 subscribers Graham! As promised I drank a whiskey on the result and your health!! Cheers Onno.

[@GrahamFoulston]

Onno Mulder Thank you Onno and you and me both! 😂😂👍🏻. Cheers for now mate. ............ Graham

[@modelrailwaynoob]

Graham that looks fantastic. I was tempted to put detail into the WWI ambulance train I am making but it is 16 coaches :(

[@GrahamFoulston]

Model Railway Noob Thank you mate and that’s a lot of coaches to detail !! Maybe a job for a couple of winter days ahead. 👍🏻😉. Cheers for now. .............Graham

[@wheezypalacemodels7726]

Ohhhh Graham, you have done it mate...10000 subs and well deserved. Great tutorial and another excellent video, cheers, Chris

[@tonyjones1662]

Hi Graham, 10k well done , a lot of work involved a brill vid as usual. All the best TONY [GRIFFIN STATION].

[@davehenshaw4657]

Hi Graham. Well done on the 10k. Those teak coaches are the best I've seen for ages. Would you happen to know the catalogue number per chance. Cheers.

[@johncarvil498]

Excellent How Too Graham.........................John.

[@carlconway7188]

Fantastic video and beautiful interior, please can you do a video on how you create these please?

[@suewalker1499]

(Joe)...10,000 well deserved Graham ....And very informative as all ways my mate 👍👍👍

[@davestrains6816]

Congrats on 10000 subs! Love the lighting affects . Thanks for sharing. Dave

[@2H80vids]

Firstly Graham, HUGE Congratulations on 10,000 subscribers - a massive achievement for a one-man home-based layout.👏👏👏 Railway modelling is, very much, a small niche market and channels like this are helping to make many more people aware of this hobby. I hope I can get this question to make sense - here goes: - do the wires from both bogies join up before they reach the p.c.b.? I'm guessing the power DOESN'T go in one bogie, through the lights, then out to the other bogie. I'm just trying to picture the wiring circuit. I'm thinking there are just two wires coming out of the p.c.b. which split into two sets of two, one pair to each bogie. Is that about right? Cheers for now, Dougie.

[@harperlarry49]

Nice work. Congrats on the 10k. Thanks for sharing.

[@KerleyExpress]

WOW 10,000 so you must be doing something right.lol Your good at what your doing an thank you for the how to video this time. Keep up the great videos I know i like them a lot..

[@GrahamFoulston]

Dwight Kerley Thank you very much for those kind words Dwight, they are as always, greatly appreciated. Cheers for now. ............Graham

[@martinpattison5110]

I think that the way you have done them is the best way that I have seen and I will at some stage do the same. Thank you for sharing. Martin (Thailand)

[@Fredstrains]

Well done on 10 thousand subscribers

[@GrahamFoulston]

Fred's trains Thank you very much Fred - much appreciated mate. 👍🏻. Cheers for now. ........... Graham

[@davehornby1722]

Great video Graham thank you.

[@66122]

Nice video like lights in coaches 👍

[@davidstrains4910]

Great video graham I will have to try some of them one day

[@GrahamFoulston]

David's Trains Thank you David and yes, try some, they’re really good. Cheers for now. ...........Graham

[@grandpaarock]

great work

[@mervyngilham2349]

Graham hi. Doing this presently hit problem with tightness of spring on axle result light works but wheels won't rotate freely. Did you have to replace the axles on the coaches with a live axle? Are they 2mm psf2 springs?

[@PhilPage227]

Amazing video Graham. Wherever the Nth degree is you have surpassed it.

[@FredWilbury]

Loll