Grand Caravan fender replacement

[@КоляКорчеватский]

I went through several videos and selected this one as my problem was 100 % similar. The direction of fender replacement is very informative and helpful. My Dodge Gr Car is 2001 and I decided do not put new fender, but simply correct old with hummer and it was good. Also I saved money. Thanks a lot!

[@DougBrownVancouver]

Коля Корчеватский I'm glad that it was so helpful!

[@dirkf.kappes467]

Good and informative, helped me a lot to change the fender on my t&c, greetings from Germany!

[@DougBrownVancouver]

Ich musste meine Okotoberfest-Reise dieses Jahr absagen :(

[@dirkf.kappes467]

I hope after Covid we live for a lot of years to recover a lot of things including Oktoberfest. Please cross fingers very hard for a vaccine or treatment soon...

[@kellywhite8886]

parts car. 1998 dodge grand c

[@jibcano]

I just rear ended somebody in my mothers 05 town and country, now i need to replace some things. thanks for the vid it should help me fix her car much easier!

[@DougBrownVancouver]

Glad to help. Everything on cars can be taken off and replaced because they had to go on in the first place!

[@brandonrecknagel998]

thanks for the video! I have a 2010 town & country and I'm not replacing the fenders, but I'm going to need to sand, fill, and touch up two rust spots on them (both sides), so your video is very informative on how to remove so i can do all of the sanding and painting off of the car. Thanks!

[@padtaiszaffaires379]

my sympathy for the scraches on your new fender

[@Eeropolvasti]

Good job, turned out to be almost perfect!=) That little groove, behind headlight, looks like you could add there extra screw with silicone/glue, then that would look better too =)You could use a small clamp in there, until glue/silicone dries up....=)

[@KarmaTiger]

How did you get the rearmost hood hinge arm / fender bolt back into place? The hidden one behind the hood hinge. It's a real PITA to get back on due to the restricted space.

[@bigkim45]

I have a 2005 Dodge Grand Caravan but none of my screws were put back on so my front fender is falling down. Do you know what size screws can I use.

[@abbiravindhran8424]

you can get fenders at the scrap yard in Toronto

[@5yago.960]

Thanks a lot my guy

[@TheHammam1989]

Thanxs Doug Brown .

[@Bryanlove1975]

Start out at that one bolt in the rear, 10mm-12 a couple days before. Rest won't piss you off haha. Just get pissed at that one bolt....LOL.....JMO.....Trust me. I've done it👌

[@surimaribo24]

thank you sir

[@richardwilliams9675]

I am replacing my fender too with the help of this video. I am facing a similar situation with my replacement fender not having that top piece for the cowl vent to screw in place. My question is, what did you do to improvise for that attachment not being on the new Fender? And How are you securing the Cowl Vent down or secured in place?

[@DougBrownVancouver]

+Richard Williams You know what, I just didn't do anything and it seems to be just fine. The cowl stayed in place and I'm satisfied so far. It's a 2007 with some other cosmetic issues so I'm not really worrying about it. Good luck with your fender and thanks for watching!

[@richardwilliams9675]

Hey buddy everything worked out great. The damage on my 2007 Chrysler Town and Country was pretty bad. I not only had to replace the fender, I had to also replace the front bumper. I am having the front bumper and driver side fender professionally painted for $250 with 3 coats primer, 3 coats base and 3 coats clear. I paid $122 for the front bumper and $62 for the driver side fender and both included free shipping through Amazon. Here are some of the things I had to replace, the lower control arm with ball joint, left side axle , both struts 2 new Complete headlight assemblies and drivers side mirror. The estimate for the repair was $3,800. I was able to do everything for under $1,300 and pocket the rest, lol thanks to this video.

[@DougBrownVancouver]

Richard Williams Fantastic!

[@stinkydogfilms]

Hi Doug. I am replacing the DS fender on a 03 Grand Caravan. Do you know if I can remove the DS mirror the same way?

[@DougBrownVancouver]

Hi I'm not 100% sure, but I don't think the body parts have changed much.

[@stinkydogfilms]

@@DougBrownVancouver THANK YOU DOUG,You're right. Already fixed. Haynes manual said to remove the mirror you had to go thru the dash. You saved me a lot of trouble. I replaced the bumper and will doing the hood and hinges this weekend. You're AWESOME. Thank you.

[@kaluea]

Thanks for the video. I have to replace the drivers door since it's damaged and I have a replacement already. Do you know if I have to remove the fender to take off the drivers door to get to any bolts? I want to keep my original hinges. Thanks!

[@DougBrownVancouver]

+Tim Borgelt I haven't done the door, but I'm pretty sure you can get at all the bolts without having to take off the fender. I have to believe the design wouldn't require that step because it's another hour of stuff to do. Good luck.

[@CHASINGPROFITS]

If you have a ram here is the fender video for that kzbin.info/www/bejne/onOrnYSGgq2LZ8k

[@louisesmith4251]

thanks for this video ! I realize you did this years ago, but how did you improvise the missing tab on top of fender that screws into the windshield cowling... i have the same problem with my new fender....--- Well i just found my answer in your replies below :) thank you

[@DougBrownVancouver]

Well that's good then. I actually didn't do anything and it's been okay :)

[@austanmay7498]

How did the paint go afterward

[@DougBrownVancouver]

You know, I just left it as is. The van was getting old and the matte black looked okay.

[@joegarnett2800]

Need replacement side door jambs

[@cyclonicblade]

Not a "cover" it's a speed nut

[@pf210]

I just did my passenger side and man it sucked lol!!

[@kellywhite8886]

1998 grand carsvsvpartsuloop