Grandfather Clock Build S1 - E4 Final Assembly Setting Timing

This complete's the Grandfather Clock Build. Please note this last video caught my hands in the way that being said it's not my best video, but it does show you how to finish assembly and setting the chime and strike timing adjustments. Join me on (Facebook mybenchjeweler) Thanks for watching My Bench Jeweler

[@DavidvanNiekerk]

Thank you for sharing. You be surprised at how much your videos are helping newbies like me

[@6942ggg]

really enjoyed looking at your damn hand every time you did something.....gezzz really man

[@rhjgold]

Darn sorry if I got my hand in the way pretty hard to film one-handed! I will give it a better go on the next video 6942ggg The Bench Jeweler.

[@jimfuente7699]

Thank you for the video very informative it helps

[@alsmekal9237]

Why do I have to slightly tap the "butterfly wing" to start the clock to chime? If I just slightly tap or touch it, then the clock will chime properly. Thank you so much. Anxiously awaiting your reply.............

[@rhjgold]

Chimes seem to be the biggest problem to get fixed. If the chimes don't work then the strike won't work either one comments on the other. Sometimes it's simply because the oil on the chime side has dried up and needs cleaning and reoiled. We provide a great clock oil kit that may fix the problem ad www.mybenchjeweler.com Thanks The Bench Jeweler Mike E;

[@robertbotwinick8317]

This Video is amazing, so much so I’m going to use it to clean my Grandfather clock. How do I obtain your cleaning kit, and what is your cost.

[@rhjgold]

www.mybenchjeweler.com/product/red-dragon-clock-oil-kit

[@rhjgold]

This is our website link for the kit they are shipped out within one day of ordering. We provide online help through our emails and hundreds of hours of video training. Thanks for watching our channel. The Bench Jeweler.

[@williammiller2750]

Both of my guard pins are approximately 180 degrees off. It has been running for months now & within the last few days, the clock will stop @ 52 minutes on the hour. The star on the hand shaft raises the bar & the guard pin interferes with the guard pin on the chime side. I have not had any interference problems with the strike side. How should I rectify this.

[@rhjgold]

As the Star Cam on the minute shaft lifts the long arm the waring pin should drop and stop till the long arm drops letting the chime barrow or hammers run. If the long arm lever drops but the warning pin does not clear the arm then it has a timing problem with the 4/4 counting cam far top right corner on the movement face. Before you make any adjustments be sure you run the minute hand and watch to be sure the problem is as I described. Let me know what's going on. The Bench Jeweler Mike E.

[@williammiller2750]

@@rhjgold Had to reposition the warning pin 180 degrees to stop the interference with the long arm. everything else was good & it works as it should now. Thank you.

[@colbysmith447]

On your website what is the wood ring clamp used for?

[@rhjgold]

A wood ring clamp such as I use is what the word replies it is used to various types of rings and other jewelry that need to be worked on a method of holding on to or clamping the objects such as a ring.

[@Jaydeeb1]

Move Your Hands At The Way .

Hi