Great TAKEDOWN Rifle for YOUR MONEY

[@billbright1755]

Firearms and their design and manufacturing process can be a magnificent example of genius in the mastery of materials. Melding steel to wood as though it were one piece. The beauty of natural wood grain a reminder of the wonders of nature. Propellents, projectiles, ballistics, metallurgy, tooling to name a few scientific elements of of a proper rifle build. They are indeed a form of artwork to the discriminating eye. Appreciation of fine firearms is a lifelong part of me.

[@ChuckinTV]

I was just saying an hour ago that I need to stop looking for rifles to buy. 5 minutes ago I was searching for a Fabarm Iris. THANKS

[@BrentAWhite1]

I love the great level of knowledge put into all of your videos.

[@UnitedStatesOfGuns]

Thanks Brent

[@1968krug]

Luigi Franchi also make fine firearms. Thoroughly enjoy your clips, thank you for sharing.

[@waynepennington2769]

You have the guns of a king.

[@robinbrown473]

Enjoyed your video on the Fabarm rifle thought they only made shotguns what a beautiful bit of engineering, what drew me to this video in particular was the strange names they give the guns I have a Fabarm Ellegi a 3 shot semi auto shot gun but not in the same class as your rifle

[@UnitedStatesOfGuns]

Strange isn't it - so excellent and yet so hard to find. I see only first class everything in this model. The 2 bolts make supreme sense : )

[@MichaelPersson-d5h]

I have one. The. 30-06 It's everything the man says it is. Wonderful rifle.

[@UnitedStatesOfGuns]

Lucky you!

[@josipkardum5196]

I would like to buy this rifle, but I am interested to know if you have ever removed the barrel and then tried shooting afterwards, and if the shots were hitting the same spot?

[@richarddixon7276]

I must say Your calm collected and care used in using none derogatory terms and references is really refreshing , it's clear You are a well practiced firearms enthusiast (expert!) and clearly know more than You give yourself credit for , Thank You , I am really enjoying Your videos and have become a subscriber as a result , I look forward to the next episode . Shoot Straight , Stay Safe & Stay Well .

[@UnitedStatesOfGuns]

Thank you Richard. I'm glad you're on board and I appreciate your kind words - they help me a lot.

[@richarddixon7276]

@@UnitedStatesOfGuns You are most welcome ! , You are helping maintain My sanity levels in these strange times , I live in the UK and am primarily an airgunner who has had a fascination with firearms since I was a child , and until I got access to the internet had to satisfy My desires with magazines (I still do !) but there is nothing quite like the spoken word to give things that "human touch" , I am currently looking through Your back catalogue and wondering How I missed You before , Thanks again . Stay Safe .

[@b.griffin317]

You forgot Chiappa. Love my 357 Winchester '92 reproduction. Could shoot it all day and so easy to reload with so many load options.

[@alanfox1309]

thank for your time and effort and the beautiful rifles you show.

[@duggydo]

Exquisite rifle. I have an R8 and switch the barrels occasionally (I did today get ready for deer hunting), but this rifle with 2 bolts makes a lot of sense.

[@eag8999]

I am SHOCKED at how affordable this beautiful rifle is.

[@matthewdeepblue]

Can you do the Browning BLR? Just it's a lever action with a traditional magazine, I'm really interested to see what you think on it.

[@royjohnson465]

YES, my favorite is the: Browning BLR '81 stainless steel Takedown (lever-action with detachable magazines).

[@patrickmarzo36]

Sir... you do a great job presenting rifles and how to work. Yes, Italy makes great rifles ......

[@MrMotorz]

Fabarm weapons are exceptional. I had a Sabatti Rover in 30 06. Hunting rifle, but incredibly accurate, well designed and very very nice. I'm sorry I sold it. It was the moment when I decided that all my actions would be M98. But maybe with the Sabatti I rushed. Thanks for the channel and greetings from Spain.

[@davidgendron1953]

Nice, really nice!! I really like the cocking and decoking feature, actually I would love to have that feature in my Ruger no1!! Such a great video and man you are calm and knowledgeable.... and most impressive is you humbleness!! Thank you for what you do!!

[@barrycassaday6316]

Thank you. Not my cup of tea but I learned something new. Pre-64 mod 70 guy.

[@kidsteach938]

It's beautiful and ugly at the same time. Weird.

[@jamesyoung7798]

Barry Cassaday, I am a pre 64 guy also. Mine is a .270 Winc. My dad bought it for me when I was 13. Age 83 now and I gave it to my son who will give it to his son when he is finished hunting. In 1963, a retired Army 1st Sgt. made a burle walnut stock for me whine is still on the rifle. The 1st Sgt. was stationed at Ft. Washington, south of Washington DC.

[@royjohnson465]

My favorite is the: Browning BLR '81 stainless steel Takedown (lever-action with detachable magazines).

[@UnitedStatesOfGuns]

Hi Roy - Hard to fin d a better rifle than the BLR takedown. You're right.

[@jakeoutdoors9600]

I do not own many guns from Italy. The ones I do own are from Davide Pedersoli. They are all reproduction 44 cap and ball revolvers. Quite fantastic revolvers, very accurate shooters and affordable for the common man. I would not hesitate to buy more Italian firearms.

[@nbenkovi]

Looks like a barrel from Merkel (Suhl) Helix, same sights. Here in Europe the best shotguns come from Italy and the best rifles (rifled barrel guns) from Germany. I love your channel, greetings from Croatia.

[@AlexCausey]

Over the years I have seen some very ornate highly engraved Italian made 10 Gauge shotguns. The craftsmanship was absolutely superb. Seek and ye shall find..!

[@deadhorse1391]

I’m to much of a traditionalist, these things just leave me cold...but I did enjoy your video.

[@swkohnle08]

Enjoyed this video Mike as always. Fine example of German engineering. Regarding Italian gun making, they have made some of the finest rifles and shotguns. In my opinion, to suggest the Carcano as an example of Italian gun making is a mistake. I always considered the Carcano as a desperation rifle to satisfy the demands of the Italian infantry in WWI and parts slapped together from WWI to support the needs of the Italian infantry in WWII. It’s not unlike trying to define Italian automotive excellence with Fiat verses Ferrari. Your channel has shown me so many fine rifles and shotguns from around the world, many of which I had never seen or heard of. Thank you Mike.

[@joshuaprince8456]

Love your show, very educational. I've learned alot from your channel!

[@waybee5258]

Thank you . Very interesting to learn about this . Well done Sir as usual.

[@UnitedStatesOfGuns]

Thanks Wayne

[@buckaroobonsi555]

Fantastic Video!

[@phylliswhite4154]

The bolt for 222 was my first thought., when you mentioned it. Glad another smith thought the same way.

[@UnitedStatesOfGuns]

Great minds...

[@billy19461]

That is a great rifle! Had never heard of this gun. You did a great job!

[@vladislavbeda6289]

Of course, Italian weapons, like car design, are one of the most beautiful in the world.

[@UnitedStatesOfGuns]

Viva Italia!

[@woodsmansfinest3814]

Another gem!

[@mdirtydogg]

Thank you for this video.

[@ipaddlemyowncanoe.7441]

I really enjoy your Channel different guys that I've never heard about thank you great job

[@rickbattle5706]

That looks like a very interesting rifle. I will look them up. Great video and info. Thanks.

[@cornbread308]

With all do respect as the saying goes....If you have German engineering and Italian cooking your in heaven the other way around your in.....well....love your videos...

[@ALKIS97]

Beretta? Benelli?

[@jonlennon3348]

I had a fabarm folding shotgun and sold it and have kicked myself for years. They make spectacular firearms and do a lot of private labeling.

[@murphy13295]

USOG , a few months ago I left a comment saying you were the " Mr. Rogers of y.t. firearm reviewers " . You commented back " Thank you , I think " . As in is that a good thing ? . I didn't answer . Here it is . " ever hear anyone bad mouth Mr. Rogers " .

[@johannesvanhoek9080]

Thank you sir once again , nice video , looks very expensive though 👍

[@barrymantei7795]

I have two bolt action guns made in Italy by arsenal firearms in 308 and 223 I bought them at Canadian Tire of all places they were on sale for 50%off I believe they have rem.700 actions

[@UnitedStatesOfGuns]

Incredible buy Barry - the action is quite different but from the 700 - but they are push feed - as is the 700. 50% off of a superb rifle is amazing - I'm glad you bought 2.

[@aaronwilcox6417]

The T/C Dimension now discontinued is somewhat similiar in that it takes down and had different barrels and bolts such as this but used an one piece plastic stock and could be had left or right hand. S&W discontinued them and thats all folks. Its not cool stuff like USOG owns but im thinking on getting an takedown conversion on one of my Ruger Hawkeyes. I cant afford the high end stuff and beside that theres very little offered in general for we left hand afflucted folk so we just have to make due with our junk we have.

[@aaronwilcox6417]

Perhaps, but id wager theres worlds apart in costs. I wish we all could own Fabarms but even sourcing such things is problematic. No doubt beyond my paygrade.

[@tonylipton4068]

Beautiful gun, easily to takedown; but safety device is seemed different from the traditional (spring field 30) ; the sound of thumb open maybe a little louder. Thank you for sharing, highly appreciated.👍 Looking forward to your next videos.❤️

[@matermangros]

Thankyou for showing this friend....heres a thumbs up since yt has disabled mine...👍👍👍

[@Greentangle]

Can you make a video about the steyr scout bolt mechanism? Thanks!

[@Hill_Billy_Without_A_Hill]

Have you looked at any Browning rifles with BOSS systems. Have you noticed if so, that the barrel lengths are not what were advertised and were about 2 inches shorter. So if they claim a 22" barrel on a older A-bolt, it's somewhere closer to 19"-20" range. They basically add the BOSS brake as length I guess. Kind of deceiving possibly, for a guy that wants the desired velocities of the caliber they bought.

[@UnitedStatesOfGuns]

It's true - they didn't know how to go. The good news is that the BOSS was pretty good and sold a lot of rifles - but I'd buy a regular rifle with no muzzle brake - which is what a BOSS is. If you have one - no worries - they're great . I sold mine though and never looked back. Just me. God Bless.

[@rudyvangeysel6040]

Dont forget perazzl

[@erichuntter2437]

I've only ever seen 2 off them and they were on gun star for sale . Am really impressed with the rifle, am going look more into them , I would be interested in a 308

[@zer-ok9sn]

The Fabarm break action rifles also look interesting

[@Strutingeagle]

Them thar Itallian rapscallions are some gun making some beotches leme tell ya now.

[@jonmeray713]

Man i want this gun

[@WvMnts]

I’m enjoying your videos! Don’t worry about what the cry baby’s say. We normal people that hunt and shoot and use our guns and sometimes setting our guns around and they fall get dinged scratched

[@paulfewings2688]

Very Nice... Blessings To Fellow American Patriots. Amen

[@tyfires723]

Love the video keep them up

[@SamuraiAkechi]

The very concept of a takedown rifle, built with a full power cartridge in mind, has fascinated me since I started playing videogames and started consuming gun-related media. However, I prefer more conservative look on the gun rather than the piece you show there. In 1976 Rogue Male (another Rogue Male screen adaptation I've already mentioned in your comment section) Peter O'Toole has some kind of takedown Mauser action rifle. The movie footage doesn't show any markings, is it possible to find out who made that gun by some other external features? I think that could be a Rigby or Westley Richards, however that's just an assumption

[@UnitedStatesOfGuns]

Hi Edward, The rifle at the beginning of Rogue Male is based on a Mannlicher Schoenauer action; it has the typical split rear bridge, safety and forward bolt handle. The takedown system looks like my old Westley Richards - with unique "turn in" barrel - but they were not turn in threads or interrupted threads; it was a "lug" system that worked perfectly but required much hand fitting - and thumb screw through the front receiver ring to lock the barrel in place. The scope is on mounts which are on the left side of the receiver at the rear - the split bridge doesn't allow for the usual mounts on the ring; although I've seen one system that allowed the bolt to pass through the rear mount. Fantastic rig. I'll watch the movie. I only watched the first few minutes and it looks like he it a coffee or tea pot. Thanks for the note - always interesting. Cheers.

[@TheDanCarr]

In this video you mention that you try to have firearms from each country that makes firearms. Have you by any chance handled any of the lithgow rifles from Australia?

[@robspath4203]

It reminds me of the Briley Trans Pecos

[@UnitedStatesOfGuns]

Hi Rob - I can see the similarity.

[@b.griffin317]

I am having difficulty finding them. Do they make left-landed bolts by any chance (I doubt it, but worth asking)?

[@pafriend]

The Blaser R8 isn't hard to find, is an amazing rifle and is also available lefty.

[@jordanlittle5391]

Cant find one here in Ontario Canada found a few shotguns from them

[@altruisticscoundrel]

Never know what caused such a sour disposition and strong opinion...it's so easy to ruin a good day. If only that gentleman could put hands on a well engineered and polished machining feat.

[@billbright1755]

The W. W. Greener Shotgun Ltd Established 1829. Chippenham United Kingdom.

[@Greyzonecompliant]

I know why you gave it just 9/10. Beautiful, smart and light rifle but. Its just not a mauser 98 😉

[@UnitedStatesOfGuns]

: ) So true.

[@skeetersaurus6249]

Personally, the feel of a Fabarm Iris is 'clunky' and 'cubic' in general, with not that great of accuracy (you aren't going to get MOA from this rifle). The Browning A-and-X Bolts are both more accurate. The Winchester XTR (for a lower price) is 10x the rifle in terms of 'fit-and-feel' (again, with more accuracy). I think that, with enough real-range experience, it is why most don't truly become 'collectors', but collect the 'premium firearms' in given categories...

[@UnitedStatesOfGuns]

Great comment Skeeter! The X-Bolt and A-Bolt are excellent and usually quite accurate. I was chatting with a fellow who works in the barrel making industry and I asked him how it is that just about any quality rifle is as accurate as the target rifles of yesteryear. He explained in detail how modern rifle barrels are made and concluded with a statement that modern quality barrels are made to such tolerances that accuracy from the barrel side of things is extremely reliable. Anyway, the FABARM is one of those incredible fine rifles that I come across once in awhile. I like the "clunky and cubic" description. : ) All the best to you and please write again.

[@Bad_spark]

Is there a German viewer who can comment on the legal status of decockers? Is it true that that is mandated in some way?

[@christianunterberger6577]

It's not mandatory, but generally desired as the safest safety mechanism. It became popular with Blaser R93 rifles.

[@Bad_spark]

@@christianunterberger6577 Thank you! I got worried there for a while. I personally do not appreciate decockers. A good safety mechanism is good regardless of wether or not the hammer spring is under tension. Still hoping that decockers are a fad.

[@UnitedStatesOfGuns]

Thank you for checking noax - I also find them odd to engage and disengage; although the decocker on my Fabarm is excellent. I'm not sure that more parts and complexity is needed when safety in all activities comes from the brain. And a safety doesn't hurt. All the best.

[@Bad_spark]

​@@UnitedStatesOfGuns I've heard credible accounts of decocking safeties causing the rifle to fire (the particular brand is not relevant but it was a newly produced premium european rifle. If I remember correctly the failure happened when it was very cold, perhaps an issue with unexpected friction and sticky oil). I'm NOT saying that decocking safeties in general have this problem. I AM saying that a well designed and maintained safety mechanism works well enough, and a poorly designed and poorly maintained safety mechanism has a risk of failure.

[@thomasgay3831]

Where do you purchase one in the USA

[@UnitedStatesOfGuns]

Hi Thomas - They don't seem to be importing them - maybe some come in through private purchases overseas; other than that I guess we have to wait.

[@system3870]

Sling swivel mounts?

[@jonathonschram3429]

I assume they are the flush cup style. The stock will have a female recess the sling swivel snaps into.

[@cdamauser1963]

@@jonathonschram3429 we all need a female to snap into.

[@HD-ph1dc]

Kind of looked like the old Pachmayer flush mount swivels to me. Personally, I love this type swivel a quick 1/4 turn and they are on or off and they are very strong.

[@bigredone1030]

How timely. I was looking for a good takedown but only found the Browning BLR

[@jiveturkey9993]

That looks like one hell of an heirloom quality Takedown rifle to me. That thing looks like it would last 500 years.

[@eag8999]

I couldn’t find a blr takedown for sale anywhere. Supposedly not manufacturing till December.

[@royjohnson465]

@@eag8999 YES, I was also looking to buy a BLR but could not find it. My favorite is the: Browning BLR '81 stainless steel Takedown (lever-action with detachable magazines).

[@theemoTV19]

What rifle is this

[@danielleclare2938]

These guns are intended for going away on a trip they are lightweight for hunting but also for transport.. take down and multi calibre is taking 2 guns on Safari in one so to speak... very interesting and well engineered I like it. The safety mechanism is perfect and intuitive my favorite part. Tks for the look!

[@UnitedStatesOfGuns]

Thanks Daniel - a really fine rifle - I like it more and more.

[@hantusmostert]

pitty that their Italian website is not secured or that they don't have an Instagram account.

[@UnitedStatesOfGuns]

I didn't know - maybe one could email them.

[@waynepennington2769]

That is one beautiful gun. I would like to get one. Can you help me out.

[@UnitedStatesOfGuns]

Hi Wayne - I would usually suggest buy one in Europe and import - but with the war and all I suspect one just has to wait - although I am not sure for what.

[@r.a.wworks6685]

I really want this beautiful rifle but I’m broke

[@aaronwilcox6417]

Ive looked to see availibility on these and cant find anything other than shotguns.

[@UnitedStatesOfGuns]

Hi Aaron - Not easy to find - I wish I knew where to direct you - sorry.

[@shurt6312]

Short barrels with slow twist rates - snatched defeat from the jaws of victory. Proper barrel lengths and faster twists aren't even a custom option. Not for me.

[@dandersonjr]

It's nice to see a channel that focuses on nice wood and blued steel.

[@UnitedStatesOfGuns]

Thanks Roadstar

[@jonlennon3348]

Do you have email so I could ask you a few questions from another enthusiast?

[@MrRoverpilot]

Not a single Fabarn rifle on gun broker, shotguns yes rifles no

[@Greentangle]

why not make a bolt strip？

[@UnitedStatesOfGuns]

Good idea GT

[@Greentangle]

@@UnitedStatesOfGuns The bolt is so different with others on the push de-cocking method.

[@wgs6606]

Really neat, no doubt a nice rifle, but aesthetically it leaves me flat.

[@jordanlittle5391]

I disagree compared to some older guns ya it's not as cool but compared to most in stock rifles at store this is better looking then any I have seen

[@wgs6606]

@@jordanlittle5391 True. This is much better than most contemporary rifles that leave me scratching my head.

[@jordanlittle5391]

@@wgs6606 I saw a 30-06 brand new for 350 I still brought a Enfield instead just abit more class

[@marcosduran1443]

Hello mr. Usog!... I was just wondering if you could help me out... I have a little garage hobby shop where i make all kinds of wacky stuff.... Anyway i want to make my son and I a couple of little black powder muzzle loading shotguns... Im new to the whole gun process but i think i have all the machinery and equipment to pull it off... Plus all the leather tooling for the possibles bags!😀anyway i wanted to make these little rifles from scratch so i was wondering if 7/8 4140 steel would work for the barrel... I was going to drill and ream it to a 3/8 bore.... Is that too small?im just making a basic hammer like the book" a rifle anyone can build " by Jerry Lindsey.... I dont plan on the gun shooting more than a hundred feet to take a rabbit as most of my shots are at about 60 feet at most.... Also if its safe... Can you tell me how to come up with a formula to know how much powder i can load without hurting myself? I dont want to make a claymore mine!😬...😂😂😂😂

[@UnitedStatesOfGuns]

Hi Marcos - I handled a few of these types of shotguns over the years. The builders used all kinds of steel and materials - 4140 is a well established gun steel - probably okay. Some of them were 36 cal and one was a 32 if I remember right - I guess they went by what lead balls are available from Hornady etc... The rules for loading muzzleloaders must work for guns such as you have in mind - starting with a little powder and going up from there. They told me that shot is tricky to manage in a tiny bore and so is cleaning. I was surprised how well made a lot of these guns were and although I didn't shoot any - the owners seemed to be healthy and reported good results. Be safe and good luck - sorry I don't know more specifics.

[@marcosduran1443]

@@UnitedStatesOfGuns thany you very much! 😀

[@KDD0063]

No offense, but you often comment on the quality of items that you have only shot and used a tiny amount. I appreciate your comments on history and functionality, but as far as durability and quality I would be better off to listen to someone who has extensively used their firearms.

[@rburns531]

You don't list what rifle you are talking about! Self-defeating!

[@UnitedStatesOfGuns]

Sorry about that - I'll ask the technical people to check and add. Much appreciated.