BEST Control Round Feed Rifle for YOUR MONEY

Enjoy my videos? Consider supporting me on Patreon! / usog
Many people have asked for my opinion on the best control round feed rifle to purchase without spending a fortune. I gave it a lot of thought and I came up with the Zastava LK M70. I also discuss other rifles like the J.C. Higgins Model 50 (FN), the ZG 47 and the BRNO Model 601. I hope you find this video helpful, and I hope you get out hunting with your new control round feed rifle this season. Watch all the way through for an interesting observation about the BRNO ZG 47 and the modern Zastava. Stay safe out there and thanks for watching!
/ officialusog
www.paypal.com/cgi-bin/webscr...
Music: www.bensound.com

[@sifterbox]

This guy is my favorite Uncle I never had He is so great.

[@clintleffingwell8129]

My dad was my "fine rifle" mentor (among other roles) up until he passed away last year. Now this fine gentleman is helping to fill those shoes, and I greatly appreciate it.

[@redcanyonoutdoorquest6220]

Very well stated. I agree.

[@DeerHunter308]

Yup, he is pretty unique and polished. His love of fine rifles is genuine.

[@kennethbankster9568]

He's the best

[@edwardabrams4972]

I was one of the luckiest kids my dads best friend was a friend of John Nosler and my father got to be able to use some of the early model Partitons to hunt with and when he used them in his pre64 in 308 they would put big game down with great authority compared to the old soft points used! And when we started using them in my dads pre64 in 300 win mag it was amazing results! My first job was for a guy named Chick Iverson who was The Dukes best friend so I got to see him a lot the last few years before he died and I was blessed with a father who was a lot like the Duke in so many ways that it was scary!

[@wizardofahhhs759]

You can NEVER go wrong with a Mauser action😊

[@UnitedStatesOfGuns]

100%

[@axelsprangare2579]

Only a Steyr mannlicher beats it.

[@davidcoleman4941]

@@axelsprangare2579 A steyr really, it's a push feed. Have you ever hunted dangerous game, you must be very brave or sporting a death wish

[@axelsprangare2579]

@@davidcoleman4941 Fine. A mauser 77 then. Controll feed, rear locking. Rear locking feature beats controll feed because it has way less resistance and can be repeated much faster. Just look at "ultra rapid shooting Lee-enfield" here on youtube! A Sauer 90 will also do well or a Husqvarna CG 3000. How much dangerous game do you realistically hunt thou? Usually here in Europe we hunt from towers and let all of the dogs do the dirty work. If you're rich and travel the world maybe you should invest in a mauser in let's say 10.3x68 RWS. 11 to 26 gram bullets. Can kill anything from fox to elephant. You can't kill an elephant with a 308 mate! (Legally). .375 bullet diameter atleast! By the way I assume you're american because if you were a brit you would know the legendary legacy of the mannlicher schönauer.

[@davidcoleman4941]

@@axelsprangare2579 Lee Enfields are a weak but very fast action. The Germans in ww1 often thought they'd run into machine gun fire. I'm an Australian we hunt on foot Buffalo and scrub bulls and Batang are our largest game animals. Nothing wrong with a 308 or a 7x57 mauser which has claimed thousands of Elephants. I have nothing against Steyrs there a beautiful rifle. I'm just a mauser guy nothing beats controlled round feed. I own and shoot a Strasser RS14 push feed but I'd never take it out after dangerous game, push feed rifles are easy to short stroke thereby jamming the rifle. Not quick to clear when your under the pump

[@vladimirmijajlovic4773]

"LK" stands for "Lovački Karabin" (hunting carbine), M70 is model . "Zastava oružje" (zastava arms), former "Zavod Crvena Zastava-Kragujevac" (Factory Red Flag-City of Kragujevac) .And yes, it cost about 500€ brand new, in shop in Serbia.

[@UnitedStatesOfGuns]

Thank you Vladimir!

[@vladimirmijajlovic4773]

@@UnitedStatesOfGuns Thank You too Mister, for the best and the most sencere guns previews on KZbin. God Bless!

[@wadeeubanks4560]

Great video. I never yawn or become bored with your presentations. You are too hard on yourself. Keep up the good work.

[@ditto1958]

I bought a Ruger Hawkeye a year or so ago. It’s an excellent rifle; I’m really happy with it.

[@JohanLind]

I've got two M98's made by Parker-Hale using (probably) German captured receivers. The stock and barrel were made i Birmingham and the 3-pos. safety was moved to the side of the stock . Both guns have cut-outs for stripper-clip/thumb. One is chambered in .30-06 and the other in 6.5x55. Both shoots fairly well but the action is quite sloppy fully extended. The 30-0s has five moose shot by my and more from previous owners. The 6.5 Swede has 15 moose from previous original owner.

[@ronlafitte6864]

You sure are correct about shooters who have issues with any rifle they shoot! I needed a smile this morning, over coffee! Thank you, Mike!

[@daviddixon2209]

You constantly amazed me with your wealth of gun knowledge.

[@craigleibbrand7761]

He doesn't say much of anything other than that it's a good rifle

[@hondacrx7829]

Still a great pump gun even though it is mostly plastic, kzbin.infoUgkxh4su9YgU1tWmjikirWcKJbjsFLEU62Bc but with care it will last a long time. It would be neat if Crosman would make a commemorative version of this with real wood stock, but of course it would weigh more and cost more, but hey, it would be cool. The included scope is more of a toy, but it does work for backyard plinking. I prefer to use pellets for greater accuracy, but BBs are just as good for plinking. This is not a Red Ryder folks; fully pumped it is 3 times the power of a Red Ryder and can be dangerous if not handled properly. Be safe out there.

[@davidcashell6911]

I did a double take, my friend just loaned me his 30-06 MARK X. He called it an 'off brand’. It was solid, smooth, easy and great to shoot. Not an ‘off brand’ with Zastav parentage. A nice friend and a sweet rifle.

[@kweeks10045]

I ran across a used Husqvarna some years back with the 1640 CRF action. It was chambered in 30-06. It shot well and looked much more expensive than the $300 that I paid for it. I sold it to my brother-in-law, who then sold it a short while later to get something "newer". I wish I still had that gun.

[@lesbratton]

I own an Interarms Mark X in 22-250 that I purchased used with a Weaver 6x for $175, it had less than 50 rounds run through it. Very nice rifle, accurate too.

[@badboymelvin9149]

The Zastava's are certainly great rifles! I've owned 3 of them, 2 in .458WM and 1 in .375 H&H and all 3 of them have performed brilliantly. The same can't be said of other rifles I've owned costing much more. The only downside to the Zastava is in .458 they have a tendency to split the stocks. My latest Zastava .458 is fitted with a Hogue full aluminium chassis stock and Leupold scope and cost under $1500 all up! For that you get all steel construction, CRF, beautiful blueing, perfect feeding and reliability and good accuracy. For the price that is just UNBEATABLE!

[@Nick-wn1xw]

Curious as to the recoil in stock mode of that .458? They seem much lighter than my Model 70 Winchester. Did they do anything to beef it up like an extra recoil lug? Good choice on your replacement stock.

[@TheRealKlinky]

I have that exact same Brno in .243win...also have a zastava - great working rifles, beautiful, functional & accurate!... greetings from Zimbabwe 🇿🇼🇿🇼🇿🇼

[@UnitedStatesOfGuns]

Thanks for the note and all the best to you in Zimbabwe - you likely do more shooting than most of us on this side of the pond. Good on you! Take care and write often.

[@TheRealKlinky]

@@UnitedStatesOfGunsThank you very much, all the very best to you too! Let's hope the world gets back to normal soon so we can all enjoy the things we enjoy.

[@jimf1964]

It always goes back to the Mauser 98. 🙂 My 1942 Swede and sporterized Spanish Mauser 98 in 8mm are wonderful, but it's good to know there are some more affordable newer options.

[@45committed34]

"Mud or blood" Love it!!!

[@lohikarhu734]

I have a Husqvarna in .270, and it has a controlled feed system... it's from about 1955, my dad's deer, moose, bear, elk gun !

[@craiglacount89]

I just picked up a Remington model 798. Remington imported the barreled actions from Zastava and then assembled them into their stocks. They only did this for a couple years, I believe between 2006 to 2008. This is a fantastic rifle with a very nice Mauser 98 type action made in Serbia by Zastava. These guns are now going up in price but you still see them from time to time for a decent price.

[@UnitedStatesOfGuns]

Hi Craig - Very fine rifle and people seem to want the Remington Mauser - which is what it is - prices going up and up just as you said. Sad they didn't continue - far better than their other rifles after the 700 line. Thanks for the note.

[@mgmitchell92]

I have a 798 as well and bought it back in 07. Excellent rifle that has never had any malfunctions. The reason... Mauser CRF action.

[@TenaciousDeezNutty]

Just get an interarms mark x. That's what the 798 is based off of

[@gregwalker4236]

gotta agree. used to buy barreled actions by zastava (mark 10's) at the gun shows with never a regret. favorite was (and is) a whitworth 375 h & h (a mark 10). saw an article about shooting a round lead ball for squirrel hunting out of the 375 case--the ultimate reduced load!

[@katpoep]

Back in the days in South Africa, we would apply fine grinding paste to our new CZ’s and work action for e few evenings. Mirror smooth and ready for some fine tuning!

[@steveraye7349]

I really enjoy your videos. Very interesting and informative. You seem very humble for someone with your knowledge and collection of firearms. I appreciate that.

[@ekrash08]

Thank you for keeping the information coming. I learn new things every time I watch one.

[@ScottGpa]

As do many of us I think.

[@ilijaboyilija]

i'm a hunter from serbia and i think every hunter that i know owns a zastava m70 or a sporterized m48 (m48's where dirt cheap between 50-150€ military officers got them as presents when they retired from the service) and they are available everywhere

[@tacocin]

Thank you sir! Deeply appreciate your keen eye and thought processes when discussing firearm quality and character. Absolutely the best gun channel there is ... period! Blessings!

[@DeerHunter308]

Yes, The Best describes the rifles he presents and the standard he lives up to.

[@gogart3]

Thanks for the info, nice to know about the options

[@elpmettsol]

Just another reason why this channel is so great! Where else, could a novice find information like this? 👍

[@oldgoat1890]

I agree, that '98 sounds like a safe when you lock it up. I was always a fan of the T-99 Arisaka for medium length cartridges (7x57, 6MM, ect.) They can be made light and are simple. I was at the range with a couple rifles I was testing. I had two identical T-38 rifles. One was re-cut to 6.5x55. I was shooting one round at a time and reached over in the box without looking and grabbed another round. When I fired it had a light recoil. I jacked it out and when it rolled across the table the neck looked short. I had fired a 6.5 Arisaka round in the 6.5x55 rifle. The area above the head had swelled out and probably was paper thin. The rest of it formed to the chamber but it ran out of brass and the neck was short. That case was about 1/4" longer than it should have been. I never did that again, but have had plenty of others tell me it happened to them. Controlled feed WILL pick up just about anything with a close rim size and fire it. Don't have various cartridges in your pockets and only one box of ammo on the shooting table.

[@creightonsmith5333]

The Sears Model 50 was made from 1950 to 1960, when the FN action was replaced by one by Husqvarna model 51L. The barrel was made by High Standard and was chrome lined. In 1972 I purchased one in 30-06 for $125. It had a very nice but well worn classic custom stock. I refinished the stock, had the metal re-blued and mounted a new 4X Redfield WF scope. I then went to the range to sight it in. Using Rem. 150 gr. CL factory ammo the rifle would consistently shoot 1" groups. It's the one gun in my safe I have complete confidence in. I would expect to pay $1500 to $2,000 for such a well made gun today.

[@UnitedStatesOfGuns]

Hi Creighton - Thank you for bringing up the 50 - I have one - also in need of attention; also as good as it gets for a sporting rifle - better than most factory rifles these days.

[@tylerellis5902]

Good information thanks. Nice guns

[@baobo67]

I bought a Zastava M70 Mauser about seven years ago in 22-250 with synthetic stock and bear barrel and it has beautifully finished metalwork. Serving me well here in Australia. Nice to carry something with a bit of heritage to it. Going by Gun shop adds they are still available here. Cheers.

[@Torqd_Off]

I had a “Husky” rifle… Tradewinds Series 5000 in 243. But I sold it. I now have a Ruger American in 270 and a Remington 700 BDL 7mm Magnum. One of the reasons I got rid of the Husky was because of the few times it failed to pick up the round and it slid down into my barrel. And it never happens at the range… always happens when you’re up in your tree stand just as the sun’s coming up. I’d usually have to use a coat hanger to push the round out.

[@laughingdog185]

Thank you once again for an excellent presentation on some very nice rifles. God bless.

[@LexLuthor1234]

Hello USOG, and thank you for your videos once more. They're much appreciated :) And to answer your question, yes i do know another m98 based model, - the Schultz& Larsen post ww2 m98 based models. When the german army retreated from Denmark they left behind signficant number of m98s. S and L used some of those actions to create both hunting and target rifles post the second world war. I recently acquired once such rifle in 6.5x57 in very good condition. Kind regards, Claus

[@rodgerbambauer123]

Back in the mid 80's I bought a interarms mark 10 in 30-06 out of a pawn shop for $250. Accurate, reliable.... Still have it.

[@UnitedStatesOfGuns]

Hi Rodger - You bought well! Great rifle....as you know.

[@burkhardtkleiber567]

Don’t forget about the excellent Husqavarna rifles on the used market. As always awesome video.

[@UnitedStatesOfGuns]

Good point BK - I think I made a video on them : )

[@Kau75]

I picked up two Zastava Interarms Mark X in .308 and .243. I think they were made in the 70-80s Love them... they were excellent prices when I got them. Nothing like what you see on the market now after COVID-19 came about.The bolt action are really crisp and clean as you describe them Mike 😎🌺🤙🏽🌈.

[@danwhyte3524]

I'm always impressed with zestava the older ones anyway! I don't know what the new ones are like??

[@dinoquintana4319]

As always you are absolutely right in your information and doctrine.i really like that you really know your business. I also really appreciate that you know your business but don't try to force everyone to see your point of view .you are great sir .a real blessing on you tube

[@scriptguru8]

What a wonderful channel! It was pleasure to watch the video. Subscribed.

[@CyclicMike]

I've got an Interarms Mark X just like yours with the exception of it having a synthetic stock which I think was an option at some point. As a kid my father and I made many trips to an amazing gun shop called Potomac Arms which was literally right at the waters edge of the Potomac River in Alexandria, VA. The warehouses for Interarms where right there along the Potomac River too. So, having grown up in the Mount Vernon/Alexandria area I felt it only right to have a rifle stamped Interarms with Alexandria, VA stamped in it also. Good times and great memories!

[@UnitedStatesOfGuns]

Perfect place for a gun shop! There is something about the Mark X and other markings on the rifle that makes them special. Collectors look for the Mark X - even though the other Zastava rifles are just about identical save for the markings. Thanks for sharing.

[@Euronasa]

Great video! Absolutely fantastic! So interesting to learn about the different mauser actions. I myself have two. One is the Mauser Oberndorf from early 1920s. The other is the Kongsberg M67, a M98 reworked into a heavy barrel target rifle. Keep up the good work👏👍😀

[@Saa45MIV]

I own a zastava m70 in .375 h&h and it’s sick! I worked the trigger in it.. dropped a 1.5x5 leupould on, bedded the action and sanded and fine tuned the stock.. deadly rifle I love its

[@kingcobra7565]

Thanks for info. much appreciated

[@UnitedStatesOfGuns]

You're most welcome KC

[@frankf7858]

Boring? I find all your presentations full of interesting information and really learn so much. So just so you know, I'm sure I'm alone in my interest.

[@dimitarhadjov3748]

Excellent video! Thank you!

[@UnitedStatesOfGuns]

Thank you Dimitar

[@MrRLH93]

My mark x may not be the prettiest rifle but it’s never let me down it’s like an old plow mule it just gets the work done.

[@UnitedStatesOfGuns]

That's an ideal rifle.

[@claytonkeates2614]

Great content as always

[@UnitedStatesOfGuns]

Thank you Clayton!

[@andrewsteinfeldt422]

Put a little very fine lapping compound in all the moving parts of that Zastava action and work it while you watch an old John Wayne movie. By the time the movie is over, it will be as smoothe as any high dollar Mauser. I have done this with military surplus actions and the result is amazing! Probably will want to remove the firing pin spring after about 15 minutes as that will be about all it needs. This can be done with the trigger also....

[@Nick-wn1xw]

Just keep that stuff away from your locking lugs And yeah it works wonder in a short smount of time.

[@davidgendron1953]

Great video like all the video you make!! Awesome informative, no nonsense, just real stuff!! Thank you Ruger 77 mkII are I think what you could call control round feed... even if they will jump a round in without going in the magazine first!

[@Gunners_Mate_Guns]

You are correct. The current iteration of the M77, the Hawkeye, is also a controlled round feed bolt gun. I have an original M77 (push feed), but it's such a great shooter that I'll never trade it in for an upgrade to the Hawkeye.

[@davidgendron1953]

@@Gunners_Mate_Guns I have an mkII in 30-06 and would love to find one in 9.3x62 or 35 Whelen.....

[@Gunners_Mate_Guns]

@@davidgendron1953 If all else fails, you could get a rebarrel job, which would be particularly easy with the .35 Whelen, since it's nothing more than the .30-06 case necked up to .358 bore. That means that you would be able to keep your existing bolt without a single change to make it properly engage the case head of the Whelen. As an alternative (unsure about how this would be price-wise compared to a rebarrel), you could get your .30-06 barrel rebored to .358 diameter and have the chamber redone to fit the Whelen case at the same time. Looking around, the 9.3x62 has a slightly different size case head, which would probably complicate modification quite a lot. Between the two calibers, the Whelen would be the easy choice, especially if you're limited to factory loads. Naturally, if you're a reloader who can locate a source of brass for the 9.3, you'd be just fine. I looked around for a MKII in .35 Whelen, and I confirmed that those were normal production guns at one time, but they're really hard to find these days.

[@davidgendron1953]

@@Gunners_Mate_Guns thank you for the suggestions... up here it would be hard to find some one that can do the job, would need to send the gun down south and I can’t see that being cheap lol!! I would love to find a M77 RSI in either or calibers.... or a European made one like a Brno or similar well made but some what affordable brand. I’m a big fan of full stock/Mannlicher style stocks! This place have lots of 9.3x62 but I wouldn’t know what is good and what is not... www.tradeexcanada.com/ Anyway I will keep on looking!! Cheers

[@Gunners_Mate_Guns]

@@davidgendron1953 Good luck in your quest. You can probably locate either a new or used rifle already in one of the two calibers you want. Either way, you still have an excellent rifle in arguably the most versatile, most well balanced caliber ever devised.

[@baitammo4652]

My original Ruger m77 with the tang safety and drilled and tapped receiver, chambered in 30-06 just keeps on working!

[@thomasjefferson1457]

I have a Higgins model 50 also and I love it. Had two of them and sold one a few years ago. Both 30-06. I like the fact that it has 2 inches of drop at the cheek piece which is what I need to properly line up with the iron sights.

[@UnitedStatesOfGuns]

Hi Thomas - Great job on the Constitution. I agree - the drop at comb is ideal for iron sights - which I also love.

[@christinamoneyhan5688]

USOG, the plastic cheek piece is installed on the 30-06 in order to force the shooters eye into the alignment with the rifle scope that was added . The rifle was designed to be shot with the iron sights, thus the comb on the stock is too low for a scope.

[@leeadams5941]

Thanks, Im in the market for a controlled round feed and yes want a 98 or as close as I can get. More options is a good thing, and I usually have my gunsmith go through the guns when they are new and do a minor blueprinting. Love this channel as I love the way you do not act like a know it all bighead and just give your opinion and experience.

[@bobscruggs9051]

I bought a JC Higgins 30 -06 from Sears in 1963 I think it was converted from an 8 mm German Mauser the action would lock up after every shot due to maybe due the head space not correct but the bolt would not open until it cooled down . I think I paid $ 80 for it and did return and got my money back , it was a dangerous rifle .

[@user-un5my5bw4j]

Yes the jc Higgins, sako browning high power, Husqvarna, herter j9, and the zastava model 70 imported as interarms mark X, Charles Daley mark X, then Remington 798. Zastava actually bought the machines from FN in Belgium that the mark X actions are made on. There great rifles that a lot of times you can get for around $500 which is a stronger, higher quality rifle than 75% of factory rifles made today. I love to build custom rifles on them and you can really push your handloads and the action will handle it.

[@georgesheffield1580]

Zastava has been making variations of the Mauser 98 for years ( pre- WW 2) , both military and civilian.

[@BigO4185]

We love you and your videos! Pure quality! Many of the rifles you mentioned are not readily available in the USA. We can buy the SAKO, Winchester model 70, the CZ557 African (Only 22 available in USA, CZ stopped making them in Feb 20) and that’s really it. CRF is really needed for Africa as you spend so much money to get there you dont want to miss a shot or get charged by an elephant. I prefer them in bolt action but push feed works too.

[@flintrichards945]

Another excellent video thank you so much for all your hard work I really enjoy your videos when they come out. I really love the Mauser action to me it’s just fantastic I prefer it over all other bolt actions I have Winchesters and Remington‘s that are not controlled round bead to push feeds they work fine but they’re just not the same to me as a Mauser thank you so much.

[@andyskinner6450]

My dad was a WWII Marine Corps combat vet. He was also a gunsmith. His preferred actions to work with were Model 98 Mauser and Ariska. I hunt with the first rifle he built in about 1955. It's a 243 on a Model 98 action with a number 5 barrel and set triggers. A hand carved walnut stock with a LOP appropriate for a 6'3" frame. I also hunt with a Ruger M77 MkII in 30-06. A thumb hole stock, a Rifle Basics adjustable trigger, and a 6x24 scope with a 50mm objective lense.

[@robthebank9453]

Great review thanks!! Ive scoffed at Zastava rifles many times, thought they were 'cheap', if you will, but now Ill wait for one to come up for sale!!

[@dobypilgrim6160]

I've had a couple of Zastavas that were very nice indeed.

[@cs-rj8ru]

Zastavas vary a bit in fit/finish. The 98 bases rifes are pretty good generally. excellent blue, decent wood and great barrels... fit and finish often leaves a bit to be desired at times.

[@neighborscomplaint6859]

I recently picked up a mint condition '71 Zastava-made Interarm Mark X in .270. Looks like it was rarely used. What a great rifle from when guns were real guns. I share your love of well-made rifles and your enthusiasm for them is what I feel when I compare them to today's "gritty sausage grinders with wood stocks" .

[@neighborscomplaint6859]

Sorry "gritty sausage grinders with plastic stocks". lol

[@michaelmckellar7620]

Always enjoy your videos. As a fan of CRF rifles I have taken advantage of many sporterized military Mausers in Bishop stocks. It was a bread and butter living for a few companies like Williams Gunsight comp. in the 1950's and Century Int'l Arms in Vermont up to 1994. Not home brewed amateur builds but smoothed and retriggered rifles polished and blued in interesting calibers in less than inspiring Birch lol. My C.I.A. Winch. P14 in .300 Win Mag is an excellent build. But I have 2 of the later built Super Grade Winch's and 2 Rugers in 25-06 and 6.5 C'moor that are extremely accurate and proven Deer rifles that carry on the CRF tradition. I've never owned a pusher but I'm sure they're adequate. I prefer the claw control of the rounds. I bought a Ruger 416 Rigby in '94. Ruger provided a Magnum rifle in CRF in a legitimate big game round that a working man could afford and only could have dreamed of prior to 1990. Heavy, the bolt isn't shaped properly but fine wood, great fit and finish and fun to hunt and shoot! Thank you again for your posts !!!

[@danielleclare2938]

I just received a CZ527 still in the post box will do unboxing tomorrow. I am anxious to see but want to video the real deal... thanks for the vid always good to see your choices.

[@stivsgulbis7688]

Hello from Latvia🇱🇻, i use mauser stile rifle- Brno M98 in 7*64 caliber made in 2004. You have grate channel👍🏻

[@MrMotorz]

Good afternoon. Apart from the 550 Africans, the last ZC Mauser 98s were the 550 that are discontinued. In Spain you can still get (less and less) new Zastavas and some Santa Bárbara. A good option is also the Voere 2155 or 2165. All under 1000 Euros. Thanks for the channel and see you soon.

[@minnajog]

Mike: Great video, as usual. I have a J.C. Higgins model 50 and it is certainly right up there with other hunting rifles in my collection including Browning Safari, Sako Finnbear and Winchester pre 64 Model 70. Her is some detailed information on the model 50 for your review. The J.C. Higgins Model 50 bolt action sporting rifle was the creation of Sears and Roebuck in early 1950 to compete directly with Remington and Winchester’ bolt action line of sporting guns. Sears spared no expense and contracted with Europe’s most prestigious firearms consortium known as The Fabrique Nationale of Liege, Belgium to build the Model 50 where gifted gun makers have produced some of the world’s most exceptional firearms. The Model 50 began with the best Mauser Actions available and the 22’’ tapered barrel was lined with hardened chromium steel for exceptional strength, durability and accuracy. These barrels were supplied by High Standard of USA. Each rifle’s final fit and finish was performed by talented European artisans. The rifle was sold through Sears-Roebuck stores and their mail order catalog for $99.99 and worth every cent considering the quality of the work. At the time Remington’s Model 721 & 722 was selling for $79 and the Winchester Model 70 for $115. Still Sears diligently tried to market their fine European made sporting rifles to their loyal customers, but sales were never that strong. It seems that Sears’s association with the J. C. Higgins “House Brand” suggested perhaps a lesser quality rifle as compared to the well recognized Remington and Winchester guns built in the USA. The Model 50 certainly fell victim to this undeserved inference, for gun experts agree that the Model 50 is considered one of the finest mass-produced hunting rifles ever built. The Model 50 is highly sought after by collectors and hunters alike but don’t expect to see one soon at a local gun show or a used gun rack because people who own them appreciate their fine European workmanship and won’t part with them easily. The Model 50 was discontinued in late 1951 and although no one but Sears knows exactly how many were actually built during its short production run, informed sources estimate that 28,000 were most likely made.

[@ChristiRich]

I saw this video last year and was finally able to locate and purchase a Mark X. I am beyond pleased with its function, controlled round feed and the fact that the extractor is able to jump the cartridge for a direct load into the chamber and still maintain positive extraction.

[@UnitedStatesOfGuns]

Glad you found one!

[@oncall21]

A great video as always and you are quite correct. I bought a Winchester Model 70 Extreme Weather and I also have a Winchester Model 70 Safari Express. The prices of these rifles (like so many others that you mentioned) have just gone through the roof. Even a Ruger MK 11 or Hawkeye (if you can find one) command a premium price to what they cost new only a few years ago. Thanks for sharing.

[@Nick-wn1xw]

Own both of the models you mentioned of the Model 70. Three in fact. They are costly but it’s relative. To a Weatherby Vanguard yes. To a new Mauser built 98 from Mauser they are dirt cheap. I would much rather pay the premium price for a premium rifle than not have them available anymore. The fact you own them tells me you would too. What are your rifles chambered for? I have 7mmRem mag and .338Win mag in the Extreme Weather and .458Win mag in the Safari Express. Worked up three different sweet shooting loads the the .458.

[@salninethousand2496]

The currently-available CZ-527 is CRF though not a Mauser based (uses a removable mag).

[@14goldmedals]

I love my left handed LUX in .223 Rem. Has the set trigger option too.

[@dbmail545]

Love mine in 7.62x39. Got a YHM can for it and 1500 rounds of subsonic ammo.

[@timvest8141]

Nice video. Beautiful rifles. Certainly nothing wrong with buying used rifles. I have a Zastava made Remington Model 5 .22 Lr and it is a beautiful well made little rimfire.

[@stanpotter7764]

Excellent video! I have 2 Whitworth Express rifles (Mk10), one in .375 H&H and one in .458 Win. Very nice rifles. The .458 was only $550 when I got it in 2001. The .375 was $1000 back in 2016 when I bought it, but was new in the box. Not bad for a rifle made in the 80s. Cheers!

[@UnitedStatesOfGuns]

Those have stocks as well proportioned as the British rifles. Now very hard to find

[@stanpotter7764]

@@UnitedStatesOfGuns Yes they do!

[@hockeytownluv2012]

You've got an eye popping collection there fella

[@UnitedStatesOfGuns]

Thank you HTL

[@clintleffingwell8129]

The other night I revisited my copy of "Mauser Bolt Rifles" by Ludwig Olson, which is one of the most authoritative sources of history on Mauser and Mauser-styled rifles. It made me appreciate the design and provenance of these great arms all the more; whether it's a surplus Mauser, Browning, FN, JC Higgins, Heym, Interarms, Whitworth, Yugo, or Zastava. Thank you for making these videos and sharing this love for great rifles!

[@UnitedStatesOfGuns]

Hi Clint, I'm glad you have that fine, fine book. Times change but the Mauser stays the same - essentially an unbeatable action; hopefully so long as rifles are being made some will be Mauser 98s - or close - as your list says. Thank you for your supportive words - they mean a lot to me. Good hunting and shooting Clint.

[@mgmitchell92]

I have 2 Zastava M70 lk rifles. They both are superb mauser actions. Both were extremely affordable.

[@paulregner5335]

I'm envious of your old Brno/CZ's. I've yearned for a CZ 550 FS in 6.5x55 Swede for some time, but could just never afford one while they were still in production. Basically a Czech Mauser in a fast, flat-shooting caliber (and I've always been attracted to the European style hump-back Mannlicher style stock). Maybe one will come my way on the used market one of these days. Thank you for yet another informative video.

[@Bert2368]

How bad you want that 6.5x55 CZ550? I've got one but I usualy go hunting with the 6.5-284 NORMA, I just feel more confident out around 300 yards with the higher velocity.

[@danrozanski6130]

I'm in the process of restoring an older Zastava M70b, someone had tried to make their own stock for it by gluing and pinning two 2x6 boards together. They had actually made a functional stock, but it was UGLY. I got a new Boyds with most of the available options, and I'm in the process of bedding the action now.

[@Chriskelly19067]

Congrats on almost 30k viewers! I've been watching since under 10k and i know you're going to make it to 100k in no time!

[@John1911]

I am and always will be a Mauser 98/70 guy for turnbolt guns. Good video. Regards, Marky

[@johannesvanhoek9080]

THIS IS A GREAT CHANNEL WITH EXCELLENT ACCURATE INFO ,,, “ I have many control feed rifles and push feed rifles and ....................... All the hype “right now” is control round feed and it’s a great action but don’t pass up on a great push round feed rifle just because of what you’ve heard in general conversation ,, trust but verify ! A push round feed bolt has a shorter action and the back of the cartridge is in capsuled in the bolt making this in my opinion a stronger action when fired . Both actions have their advantages and disadvantages, if your going to Africa After dangerous game then take a controlled feed Rifle if you do some research you’ll understand why I’m saying this, but if you just want a target rifle or a good hunting rifle then there’s nothing wrong with a push feed bolt rifle ! PS. The Rifle’s here in this video are very good rifles and everyone knows you can’t beat a 98 action I THANK THIS CHANNEL FOR GIVING EVERYONE A OPPORTUNITY to “SEE THESE FINE RIFLES “ 👍

[@u.p.woodtick3296]

Born in 1952, it took me ten years to find my 1952 mod 70 Winchester in 30-06, it is in 98% condition and set my back $600 ten years ago. We only get here once, get what you want. Thank you for another information filled video.👍

[@UnitedStatesOfGuns]

You bought well - actually ideal rifle and the value doesn't go down. Awesome!

[@u.p.woodtick3296]

@@UnitedStatesOfGuns I couldn’t sell it today for that as all the kids (young people) want the black rifles. Don’t get me wrong I like em all as I’ve a Sig model 400 in 5.56 Nato (3 bucks with) and a Ruger Mini 14, Ranch, 584 series , but the 1952 mod 70 I’ll part with at death. Really love your learning lessons 👍 Good health to you

[@ronlafitte6864]

I’ll always love the feel and looks of a Ruger Model 77. Very well made and strong as all get-out. I’d love to own several of the European rifles but seldom see one for sale.

[@greybone777]

The older 77s are push feed with a Mauser style claw extractor. They are often mistaken for controlled feed. The Mk 2s are controlled round feed . Both are excellent 👌. My older model has a super smooth actions, and the bluing quality was much better than the other rifles made in the 70s and 80s.

[@anthonykaiser974]

J. C. Higgins, Interarms, Charles Daly, Century, FN*, Zastava* , Husqvarna*, ZB* (Brno), CZ*, and of course Mauser (still) and Browning all brands that had and/or manufactured* Mauser 98 commercial rifles. Always something on Gunbroker and GunsAmerica.

[@uralbob1]

The J.C. Higgins is simply beautiful. The wood, with it’s lack of grain, looks almost plastic like a Nylon 66.

[@johnstruewing1164]

Bishop Stock Company produced a lot of stocks in various stages of completion. Very popular during the time of the JC Higgins rifles.

[@servicerifle16]

I have one of the JC Higgins FN Mausers though its called the Model 51. I think its supposed to be a "deluxe model" because it came with a scope and has checkering on the stocks. Everything else appears to be the same as the 50.

[@doncatchpole7370]

Good stuff

[@jl8543]

Always rely on a Mauser action.. Great video.. Sir.. I love Mauser actions the best..

[@garypiont6114]

Mausers are vastly over rated.

[@wiregrassga]

I have a Ruger 77 Hawkeye which is competitively priced and has controlled round feed though Ruger seems to be decreasing the options in this line as costs go up. The latest CZ's are push feed now but there are moderately priced earlier models with the Mauser action.

[@georgesheffield1580]

The Rugar is excellent but about twice the price .

[@tsmgguy]

The excellent Cz 527 might be worth a look, too.

[@tommurray8312]

cant beat the mauser action, a joy from a modern winchester m70 or an old war horse 98

[@altruisticscoundrel]

Feed Control trend probably started from 'The Real Gunsmith' video on "Push Feed Actions" from a year ago and his follow up "Operate Actions Properly" from 3 weeks ago which detailed most complaints about his rifles were from improper use. Mainly, pushing the bolt closed too slowly to activate the proper mechanism. Your viewers are likely seeing his videos suggested, if not subscribers themselves, or they are reading comments based on those who have. Please continue your fine videos. Even if it's not a hot topic, I learn from your steady hands and deliberate speech.

[@margillard7272]

Aww you have to have a look at the CZ-527 carbines with a mini Mauser 98 action (Kurtz). They are currently available new from CZ USA and digest the cheap to shoot 7.62x39 steel surplus ammo as well as other modern light US caliber offerings. It is such a joy to shoot as a scout rifle. Quite an underrated little carbine I must say...it groups 1moa if you do your part.

[@asimseth1927]

What a great video on controlled round feed. Hailing from a country where new firearms are scarce and reading so much on controlled round feed and push feed, I went for buying a controlled round feed rifle and what a coincidence I brought a brand new Zastava MK 70 in .30-06 and haven’t even fired a single shot since I brought it 3 years ago. In Pakistan you don’t come across mid range and expensive rifles due to the import bans on firearms since the last coupe of years. Keep up the good work Mike!

[@rdrrr]

Interesting, I know there's a lot of "home gunsmithing" in the Khyber Pass region, it has a long tradition. But, if there are a lot of restrictions on buying and owning firearms, are "home made" firearms common in other regions of Pakistan?

[@gennerobootz6490]

I really love these m70

[@joshhorn5131]

Awesome video..As always. I just today brought home a Interarms/Whitworth 243 win. It's definitely a lot of rifle fer the money. Especially these days

[@UnitedStatesOfGuns]

Hi Josh - So hard to find the .243 Interarms rifles - that's fantastic! Good on you and thanks for the note!

[@amym828]

If you ever want to consider modern designs, take a look at the Mausingfield action.

[@aex-blacksmithuk2111]

I read your comment, I had never heard of Mausingfield, so I looked them up. I was impressed, thank you comment, because of it, I learned something totally new to me. Thank you. :)

[@ScottGpa]

Always well thought through and orderly presented, you do make and post very informative videos. Also, I'm sure I'm not alone in appreciating a gun video without some ear assaulting, revved-up, Saturday afternoon at the testosterone dome, overbearing (music?). I read an article titled "Store Brand Sleeper" (Jan. 2020 Rifle Shooter) where it discussed the JC Higgins mod. 50. I was intrigued but being in Canada figured the chances of ever seeing one worth while here might be close to impossible. I was wrong. Saw one advertised a few hours away from me and pounced on it. Best $600. ($470. U.S.) I could ever spend on a 1954 build. Having researched a plethora of history on the rifle I felt even better about my purchase. A total tear-down for cleaning and off to the range. With the JC Higgins Rifleman Senior 2x scope (Weaver) and Federal 180 gr. (30-06) I managed a 1 1/4 inch group shooting 4x5 shot strings. Something I am sure a younger shooter with a steadier hand and clearer vision might very well improve upon greatly. It is a no frills rifle for sure but screams quality and close attention to every detail of manufacture along the way. I consider myself very fortunate to have come across this rifle considering the price and availability of firearms in Canada compared to the U.S. These old Sears Roebuck & Co. Mauser/High Standard rifles seem to be scoffed at by many and gun forums are awash with people talking very low prices and I suspect not having any hands-on familiarity with them. A mod.50 in 270 just recently sold for $1,882. on GB and that was quite a bidding war for the interested parties. A fantastic quality rifle that if one passes it over because of the store branding alone he or she would be doing themselves a huge disservice. Thank for sharing your passion for firearms here.

[@redsky8509]

looked the Zastava up, nice looking rifle. good price.

[@Nick-wn1xw]

Hard to find though. But yes very solid.

[@1straightcut]

I have a Higgins Model 50 and 51-L. The 50 and 51 actions were manufactured by FN, while the 51-L had a Husqvarna 1640 action. Though my Model 50 has a great trigger and is very accurate, I much prefer the 51-L for the super fast slide safety located on the right side of the bolt. Having to flip the rear mounted safety on the Model 50 or 51 for a quick shot is typically a deal breaker. Sometimes, you just don't have a second chance in the field, so I leave the M50 in the safe.

[@RonnDogg9900]

I discovered your reply two years later and you are only the second person I've come across who owns a J.C. Higgins 51-L. I found one on the "deal" rack in my favorite old-time gun shop in Tucson, in near perfect exterior condition, bore perfect, Husqvarna action, .308 Win. It shoots absolutely perfectly and is to me a gem. I think I paid around $375 for it. From my research it's an early '60s manufacture. I am thinking the 51-L Higgins rifles are rare. I find very little reference to them online.

[@michaelguerin56]

The ZG 47 has an override trigger arrangement, just like the pre 64 and USRAC Model 70 rifles.

[@brucevodka]

Thank you!

[@UnitedStatesOfGuns]

Thanks for watching

[@johnparrish9215]

Speaking of CRF Rifles, I found something interesting the other day, a Husqvarna 46 in 9.3x62, a very good rifle that has an interesting feature, it takes Stripper Clips. I checked and yes 9.3x62 does fit 8mm Mauser clips and feeds into the rifle, it just struck me as interesting to see such a heavy hitter being able to use the stripper system, a happy coincidence no doubt.

[@robertboyd3863]

My old Winchester model 70- 270 , takes stripper clips

[@trapdoorspringfieldmodel1888]

Not a bad choice, and the one you featured had a pretty neat looking stock. That having been said I have to keep in mind various factors before stating what I think is the best brand new control round feed rifle for the money. These range from how familiar the gunsmiths in my area are with regard to a particular rifle, manufacturer's reputation for quality, price of the rifle, etc. So for me taking into account that I live in the Intermountain West of the U.S.A., and that gunsmiths are going to be extremely familiar with the more common or popular brands in the area I have to go with the current Winchester Model 70. It fits the factors that I have listed quite nicely and I think is a tough rifle to beat. Anyways, thank you for the video and stay safe.

[@Me2Lancer]

Thanks for sharing these beautiful Model 98 Mauser rifles. Czech and Serbian rifles have a long military heritage. It's encouraging to see these sporting rifles. When I hear bolt action rifle Mauser is the first design that comes to mind.

[@UnitedStatesOfGuns]

Hi Rich - you're most welcome - Mauser means more than the name for those who know. I agree with you - bolt action means Mauser to me.

[@Me2Lancer]

@@UnitedStatesOfGuns Thank you Mike. I might ad that when I think centerfire rifles I'm thinking bolt action.