flyin! picking up my gp tomorrow and already ordered my maptuner from you guys!
@GreenHulkGarage3 жыл бұрын
Thanks so much
@Beastboy032 жыл бұрын
Man that thing is sick 😍thx for the vids
@jimwinn80643 жыл бұрын
Awesome job on the videos! I pickup my 2021 GP1800R SVHO & 2021 Yamha EX. Thanks for the tips/videos, I plan on installing these parts myself.
@GreenHulkGarage3 жыл бұрын
Thanks! these parts definitely turn the GP into a whole new animal
@thomasdamiano82603 жыл бұрын
Thanks for making these vids, I just ordered a last of the 21 run models from riva. Plan on ordering a stage 1+ kit from you.
@GreenHulkGarage3 жыл бұрын
Thanks for the support!
@LifeBeginsOnTheWater3 жыл бұрын
Like always Greg, great job. Some good content for everyone as well. That ski is flying bro. Now we just need to get y’all on the water for a few rides with us. Billy D
@GreenHulkGarage3 жыл бұрын
Don"t hesitate to let me know when y'all go ride. I would be happy to tag along.
@aceofspades66673 жыл бұрын
For me this would be the sweet spot in price to performance ratio along with the amount of wrenching on the ski. I wouldn't want to go stage 2 and the stage 1+ is a nice upgrade over stage 1.
@miota10003 жыл бұрын
Great video
@LIBERTY0RDEATH3 жыл бұрын
Damn that’s fast!
@AftrBurNr3 жыл бұрын
Got my parts from you today
@GreenHulkGarage3 жыл бұрын
Thanks so much for your business!
@btappan13 жыл бұрын
Picking up my GP next week, just ordered the Stage 1 kit from you guys as well! After these mods and fine tuning for top speed, can the speed limiter be set ~80MPH to avoid hitting the rev limiter?
@haythem92972 жыл бұрын
MONSTER 👿😏
@GreenHulkGarage2 жыл бұрын
That’s right 👍
@johncunningham11833 жыл бұрын
I have the only blue 21 gp1800r in Nova scotia . Why would you not use the Solas 13/20 impeller instead of re pitching, only asking because I don't know
@cpoggiolo683 жыл бұрын
How about a link to repitch impellers vid. Currently running 14 FZR Ribbon delete and Torx Stage 1 8400 . What pitch do you recommend? Tia.
@Breakitjake3 жыл бұрын
Another great video. One thing and correct me if I'm wrong, but on yamaha 1.8 supercharger engines. The breather hose sucks air in. Unlike any other crankcase vent I have ever dealt with which would expell the oily fumes into the intake. Like you said.
@GreenHulkGarage3 жыл бұрын
The breather hose is expelling crank case fumes into the intake tube! This is not good for engine performance which is why it is important to add the engine breather kit.
@R1Kyle3 жыл бұрын
@@GreenHulkGarage Why is it not using a catch can, I know they do not pump oil like a seadoo but there must be some.
@evostigti3 жыл бұрын
Great video. Question: The stock filter isn’t that cotton too just like auto filter ? The marine filter looks like it’s gonna suck water in like a straw, better off running no filter from the supercharger...
@GreenHulkGarage3 жыл бұрын
The stock filter is similar to an auto filter. The marine filter is better than running no filter at all, it will prevent any solid particles from entering the intake. The chances of it "sucking water like a straw" is slim to none because it is high in the engine bay. However if it gets wet, it will dry almost instantly. A filter using a paper or gauze element will get wet and stay wet for extended periods of time causing problems.
@R1Kyle3 жыл бұрын
Have there been any / many cases of these impellers failing prematurely?
@PTRRanger95110 ай бұрын
I’m not finding the video you did on how to repitch. What’s the title of it?
@piotrjurkowski39602 жыл бұрын
Did you have to do the Engine Cooling upgrade kit on this too? My Stage one plus kit came with everything you had just installed plus the Engine Cooling upgrade kit.
@GreenHulkGarage2 жыл бұрын
No, I will do the Riva Pro Series cooling kit when I install the Riva intercooler and go stage 2 👍
@jasonmekush52803 жыл бұрын
you guys make a seat cover yet eager customer here w a 2021 gpr. very fast machine , riva grate , stg 1 8500 maptuner x tune
@GreenHulkGarage3 жыл бұрын
We do have seat covers! here is a link to a black seat with green stitching, silver stitching is also available: www.4-tecperformance.com/index.php?main_page=product_info&cPath=352_380_97&products_id=11350
@jasonmekush52803 жыл бұрын
@@GreenHulkGarage 350 for a set , argh just the rear seat needs a cover, ty but ill try a local vendor for a custom one to hide yamahas stupid warning label.
@bernardmcnamara3 ай бұрын
What did you end up repitching the 13/18 impeller too?
@henrythompson56243 жыл бұрын
So if I go with the stage 1+ wit the 13/18 Impeller but don’t know how to Re-pitch the impeller that means I can’t ten the 88 tune because of rpm to high. If yes can I add on another bolt on part that will leave that out
@GreenHulkGarage3 жыл бұрын
It depends on a few different things. Engine RPM varies depending on your location of the world and weather conditions. Higher altitudes will have lower RPMs and hotter temperatures will have lower RPMs. Repitching an impeller is surprisingly easy, I have a whole video on how to do it! Here is a link to that video: kzbin.info/www/bejne/opnTiYGEg52phMU
@Charles-rn4li3 жыл бұрын
what kind of tuning do you think is available for a 1998 seadoo gtx? i feel its got a lot more to give im just not sure what direction to go....
@GreenHulkGarage3 жыл бұрын
There’s no tuning or performance parts available for it unfortunately.
@skipmidgett61892 жыл бұрын
Any suggestions on how to get the pipe into the hull? Did you go thru the front? It looks like there isn't much room with the wires and big vent pipes. Thanks
@GreenHulkGarage2 жыл бұрын
I go through the engine bay. I turn it upside down to get the front in first and twist it through
@UHCohort23 жыл бұрын
If I order this kit from you guys am I going to have to repitch the prop that comes in the kit or can we substitute the correct prop?
@GreenHulkGarage3 жыл бұрын
The kit comes with the correct pitched impeller for the modifications and tune. Riding environments do vary so you can always optimize performance by fine tuning pitch for you riding area. More about this here greenhulk.net/forums/showthread.php?t=249244
@johngonzales18453 жыл бұрын
Bro I have a 2018 GTR 230 Seadoo and all the videos out are for the Seadoo 300's...would you be interested in putting a package together for this? I also have a 2016 FXHO that could use a little more oomph
@GreenHulkGarage3 жыл бұрын
Hi John, we already have performance kits for both of your skis. You will find them on this page of our store www.4-tecperformance.com/index.php?main_page=page_2
@fyoukungflu58813 жыл бұрын
If you do just the Stage one tune , no impeller nor intake, what can you expect top end for a 2021 GP1800R.
@alexnutcasio9362 жыл бұрын
75-78
@warlordmel3 жыл бұрын
Exactly how much did you pitch the impeller? Did you do all the blades, and did you Pitch em up or down? Thanks for answers from Sweden! :)
@GreenHulkGarage3 жыл бұрын
I pitched them 1.5mm (added pitch) You must always pitch all blades and make them identical.
@warlordmel3 жыл бұрын
@@GreenHulkGarage Thanks 👍
@markthompson59343 жыл бұрын
What about engine cooling upgrade kit is it necessary to install or just helps out. Is the 1 plus kit in stock?
@GreenHulkGarage3 жыл бұрын
It is not necessary, but it definitely helps and I do plan to install it. During the speed testing performance was lost due to heat fade. The 1 plus kit is currently not in stock but should be very soon.
@Vince-jj8qs2 жыл бұрын
Do you lose the software choices for driver assist. Auto Trim and Drive modes when you load the new tune???
@GreenHulkGarage Жыл бұрын
You do not
@zachknight97603 жыл бұрын
What are you doing about the current recall on these things? I got notification for my 21 GP.
@joeyd13113 жыл бұрын
??
@David-dg3kb3 жыл бұрын
Do you prefer not to run the impeller boot on all skis or just specifically the gp? Just wondering if my Rxp would benefit from removing the boot.
@GreenHulkGarage3 жыл бұрын
Don’t run them on any skis. They are problematic, they come unscrewed, walk up the shaft and cause cavitation issues.
@AftrBurNr3 жыл бұрын
@@GreenHulkGarage That happened to me on my sea douche
@jasonmekush52802 жыл бұрын
Today, I have a race mechanic , custom pitching my prop solas starting at 13/20, hitting 8050 rpm at the moment stage 1 plus + kit. 94 degree heat in fl. Having it repitched as a specific rpm target 8500, Ill let you guys know how it turned out even the cavitation level. Btw the solas 13/20 just roasted cavitation all the way to 20 mph, skii makes too much power
@GreenHulkGarage2 жыл бұрын
Sweet! Do not pin the throttle from a dead stop. You have to modulate the throttle to limit the cavitation to get the best acceleration
@jasonmekush52802 жыл бұрын
@@GreenHulkGarage You will like the bottom end on ur hulk green gp when u do the intake manifold upgrade - aka ribbon delete. I used to race I J S B A expert class 785 runabout from 96--98 . I am pretty well versed with holeshot and cavitation mitigation. Keep up the great work on your vids, looking forward to your store offering new products for this machine.
@bernardmcnamara3 ай бұрын
🤔 cavitation of the start. Change the leading curvature edge of the impeller to a straight edge impeller thus improving the hole shot cutting down on the cavitation.
@AftrBurNr3 жыл бұрын
What is the advantage of the 13/18 impeller vs the 13/20? The riva kit has a 13/20, what makes you choose the 13/18?
@GreenHulkGarage3 жыл бұрын
No advantage, the 13/20 is the correct impeller for these mods, but it was on back order from Solas. So I pitched up my 13/18 to a 13/20
@AftrBurNr3 жыл бұрын
@@GreenHulkGarage Do you have the 13/20 and Riva intake in stock? Cause Riva DOESN'T
@jonathanrath26272 жыл бұрын
Get to 100mph and you'll have my attention 🤘
@bryandedon74593 жыл бұрын
Do yall have a physical store or is it online only? And if so where is it located?
@GreenHulkGarage3 жыл бұрын
It is online only
@codieorten39093 жыл бұрын
Just getting the 2021 FX Cruiser SVHO what do I need to get to undo the speed limiter?
@GreenHulkGarage3 жыл бұрын
Here is a link to what you need to remove the speed limiter, you will also be able to add performance tunes down the line if you decide to add performance parts! www.4-tecperformance.com/index.php?main_page=product_info&cPath=316&products_id=4250
@codieorten39093 жыл бұрын
@@GreenHulkGarage question? Does doing this void the warranty on the ski since it's new?
@kenygonzalez97623 жыл бұрын
What did you pitch the prop to? Also nice video!!!
@GreenHulkGarage3 жыл бұрын
Thanks! I added pitch to the trailing edge making it roughly 19 degrees
@kenygonzalez97623 жыл бұрын
I’m on a stage 2 setup but I’m not able to get 83 mph.
@kenygonzalez97623 жыл бұрын
I pitched the prop to a 19 .
@GreenHulkGarage3 жыл бұрын
What are your RPMs?
@kenygonzalez97623 жыл бұрын
@@GreenHulkGarage 8800 flash spinning 8650
@rogernascimento50063 жыл бұрын
What was your RPM with the 13/18 prop. What did your speedometer say on the dash
@GreenHulkGarage3 жыл бұрын
After I added pitch to the 13/18 I was right at 8600 RPMs and the dash was steadily holding 85 mph.
@bradleybranch-spellen67283 жыл бұрын
@@GreenHulkGarage Hi. Can you give some measurements on what you re-pitched the 13/18 impellers trailing edge to? Mine is currently off, so now would be a good time to do it. Thanks
@tuckerm80893 жыл бұрын
@@GreenHulkGarage I have a 2021 GP1800 also with the same mods only a 13/20 solas and I am only seeing 75mph at about 7800rpm. Riva 8500rpm tune. With the stock impeller I saw 78mph at about 8000rpm. Full tank, 90 Air, 80 water temp. I have a Riva intercooler and cooling upgrade on the way to hopefully add a little more power and a ribbon delete kit. Im sure a 13/18 would get my speed up but my question is with the new parts on the way do you think I should order a 13/18? I don't plan on doing valve retainers so 8600rpm or less is where I'd like to be at. Also should I be running the 8800 stock class tune? Thanks for you advice and info!
@henrythompson56243 жыл бұрын
Where did you order that vest from I’m trying to find it
@@GreenHulkGarage thank for making the it a one stop shop for me I can get my parts an the vest 🤜🏽🤜🏽
@carloschaqui82343 жыл бұрын
Stage 3 in the near future, on the GP?
@GreenHulkGarage3 жыл бұрын
Absolutely! we are getting ready to do stage 2 now then stage 3 will not be far behind.
@rickperez4283 жыл бұрын
With this upgrade is it still under warranty compliance?
@GreenHulkGarage3 жыл бұрын
The Stage 1 8000 rpm tune is not detectible by the dealer 👍
@GreenHulkGarage3 жыл бұрын
Also, They cannot “void” your entire skis warranty for doing a mod to your ski. They can “deny coverage” on a failed item if the modification is proven to have caused the failure, but your entire skis warranty is not VOID!! For example, let’s say you reflash your ecu with a performance tune. If your steering breaks, instrument cluster goes bad, a sensor goes bad, etc, then the reflash could not have caused one of those items to fail so they cannot deny coverage. Now, if you have some sort of engine failure then they could absolutely deny coverage on the motor repair. Point i’m trying to make, is your entire skis warranty is not VOID if you mod your ski. Research Magnusson Moss Warranty Act. It protects us consumers when modding our skis 👍
@costasgeorgiou50153 жыл бұрын
That Solas is junk get a skat trak.
@GreenHulkGarage3 жыл бұрын
And slow my ski down? No thank you! The Solas is not junk! They make the best impeller for our skis.
@costasgeorgiou50153 жыл бұрын
@@GreenHulkGarage slow it down ?? HA OK! When that impeller comes apart get back to me. But I hope it doesn't but it will happen its almost inevitable. Goodluck bro!
@GreenHulkGarage3 жыл бұрын
@@costasgeorgiou5015 absolutely slow it down! The Skat is a good rough water impeller, but slower on top end than the Solas. You’re misinformed on the Solas impellers coming apart so let me enlighten you.... Most of the “Solas” impellers that come apart were Chinese knock off’s.... not real Solas impellers. These knockoffs even come in “Solas” boxes and look legit! Solas had a bad run of Sea Doo 300 13/18 impellers that were folding over and failing. Panic spread throughout the internet making everyone think that all Solas impellers were bad and would blow apart. Not the case!! Solas corrected this issue with the new SXX series 13/18. Yes, there have been some failures of real Solas impellers fail for other model skis, but Solas stands behind their product and if there was a failure they replaced the impeller. Solas offers the best and fastest impellers for our skis, I run them on my skis and never had an issue. If you are in the market for a Solas impeller be sure to buy from a reputable vendor that sells genuine Solas impellers. The GreenHulkStore.com, Riva and Impros all sell genuine Solas products 👍
@GreenHulkGarage3 жыл бұрын
@@costasgeorgiou5015 and FYI, I have been using genuine Solas impellers for nearly two decades on extremely highly modified skis and have not had any Solas impellers come apart on me, not a single one! I also sell Skat Trak impellers and use them on some of my builds and I have had two of them come apart on me, but this was on a very high power 100 mph turbo FZR build. You can check out any of my builds on my forum GreenHulk.net
@costasgeorgiou50153 жыл бұрын
@@GreenHulkGarage not goin lie a lot to read brother. But Solas is still having issues and I won't go back. Glad you got luck with them I don't and mine were also legit props. I have 2 skis well over 100mph (108 to be exact on GPS) and the quality of the skat its unrivaled in my book. I know your greenhulk mainstream thing but us fast back woods boys go with skat to be fast. Let me make clear not knocking what you do by no means I just don't do "mainstream" out yonder. But let me ask you this I'd you can get polished or brushed in skat or Solas and have the same pitch (true pitch with skat) what would be the dif in the same ski for speed. All my skats aren't off the shelf there made to my specs when I call them.
@jro28683 жыл бұрын
Sea-doo junk! Carbon seal failure. Nice way to dive ur ski!
@jaxrican13 жыл бұрын
So much good info, but PLEASE stop jumping the vid so much...Subscribed to someone else, just because of that.