Greeting Card HACK. Unique gift idea!

[@SpecificLove7]

I love your idea of protecting your fingers with packing tape when using super glue.

[@SawDustMakerRJM]

Great job on the musical greeting card Steve.

[@Lutranereis]

It must have taken a little extra time to edit in that song, but the joke was totally worth it.

[@Nickaburt]

Very creative card, I should make one of these for my wife. I might put a photo inlayed on the inside. Thanks Steve!

[@ConstructIcon]

Awesome! I really like the way you repurposed the electronics & made it your own:)

[@billnoe8728]

That's the funniest video of yours that I've seen to date. You wrapped your fingers with packing tape LOL. Thanks I needed that

[@ScrapwoodCity]

Super cool project! The tap trick for not getting glue on your fingers was awesome!

[@SteveCarmichael]

Very cool project Steve! Princess Meow Meow is like the sixth Beatle now! lol

[@KSFWG]

I think Princess Meow Meow falls in line just after Pete Best and Brian Epstein... But I do agree, it is a very cool project. Of course, just about anything that includes The Beatles has got to be a very cool project. Thanks for the video ***** !

[@wyssmaster]

This is actually a really cool project. There are a few places online where you can actually buy the sound modules and make your own custom musical cards (they can be expensive if you're not buying ~20 at a time, though) which would go great with this. You could record a personal birthday message, or just scream at them!

[@wayn3w]

As a circuit-bender I can tell you parts of that little circuit can be upgraded if you can handle a soldering iron. * You can put a sturdier switch in there -- consider a reed switch or push-button switch. * Any 8-ohm speaker can be used instead of that flat speaker and it will sound even better in that box. * These things are need 3 volts, so you can put in a a double AA-cell battery clip instead of using the hearing add-style batteries (it'll give a longer life) AND you can probably make a nice little door for accessing the batteries. There's more, but that would be to add wackiness to the sound.

[@ATF-su7pp]

Cool project Steve. I am 14 and enjoy your videos every week. Keep up the good work!

[@kylerunyan5950]

What an AWESOME IDEA! That turned out great!

[@fabriziocascone8744]

The packing-tape idea is great!! i HAVE to remember it!

[@Lamellikuljetin]

Hi Steve, greetings from cold Finland, Happy to see so nice woodworking videos almost every week! Keep up the good work!

[@MarkChristopherpens]

Now that is out of the box thinking! Another super cool project idea Steve :) Cheers from Nova Scotia!!

[@thecurtish]

It's really cool to see you work in so e electronics into a project!

[@lsmft9576]

Smart project! Interesting and very creative Thanks.

[@StewartLMcGill]

37 seconds in and this is already the funniest video i have watched today. Good work.

[@jeffp6789]

Cool idea Steve! Now you can create a series of Princess Meow-Meow wooden greeting cards to be sold in all the finer card shops and lumberyards!

[@jeffp6789]

Of course. She's a cat. My cat gets snooty whenever I take her picture. To save on the cost, you could make the cards out of hardboard (or as some call it - masonite) instead of plywood.

[@WhatWeMadeTeam]

Purrfect idea! I cannot wait to make one.

[@seanc3362]

Got the meow meow kitty song stuck in my head. Great vid as always Mr Ramsey!

[@Greg38Blues]

Great repurposing idea Steve!

[@BradRuh]

The "meow-meow" song is sooooo much better. Love it!!!

[@ericturner7080]

Awesome Idea. Fun to see unique projects

[@Dukefazon]

I found a cool rack made from bamboo. I'll try to send you the picture somehow. By the way, the Princess Meow-Meow theme is really cool!

[@matt_williams1015]

Great video, very creative project Steve!

[@HarryWatts65]

Great job Steve, I will have a go at that, cheers Harry.

[@mikkosha]

The only reason I would buy a gripper is so that you could make more commercials :D They are one of the many reasons I watch your videos :D

[@adamhollermann5208]

Very cool idea Steve, thanks for sharing!

[@rhoula]

Thank you Steve for another great video.

[@cmm1493]

Truly brilliant idea, Steve! Just discovered your channel a few months ago and in that time have picked up a new passion in woodworking, so thank you! Definitely going to make this for my girlfriends birthday next month, but with the cover of her favourite book on the front. Keep up the phenomenal videos and unique projects!

[@joshdann2674]

first time I've ever seen a mini-dado cut on a band saw :) great video as always!

[@davidwostrel]

haha!!!! LOVE THE THEME!!! and your use of it!

[@OaklandRaiderFan99]

Absolutely love the look of that. Great project!

[@CYXXYC]

I love these funny microjig intros :D

[@RobertEchten]

Nice. Have you considered having the sound module sideways and have it play the music when opening (much like the original card)? So attach the tab to the left side of the wooden card.

[@rsmith2237]

Great project Steve.

[@SkullyWoodMetal]

Very good idea Steve nice project.

[@Jerry-jx5yv]

Love the way it turned out I might take a block of wood to look like it.

[@lankystanky]

This is great cause it been like uploaded on the 28/3 which is my birthday ... Haven't yet watched but I love when you make stuff up Steve , proves to us ur human

[@NJEsperantist]

Steve, I think this is the first time I've ever seen you use that wooden hand screw clamp. -Dave

[@RyanLundquist]

Nice job, Steve. I love the random stuff you make. This is something I'll have to do at some point.

[@StuartSafford]

A more permanent greeting card. I had never thought about this. It might be a good way to preserve a card from a special event.

[@Sillyzombie666]

can use a sound board from radio shack (like $12) and then add a lever switch to trigger the music. the bonus is that yopu can record what ever you want up to $20 seconds and its a much better sound quality and if you put a bottle cap over the speaker it not only makes it louder but makes it sound better

[@BackyardWoodworking]

Now that's nice Great Idea and well done. Have to look for that photo transfer paper never seen that before. Thanks Steve.

[@BackyardWoodworking]

***** Thanks Steve now I know how to do it.

[@stevebrown1132]

Great Idea Steve!

[@marcoslopez54]

Cómo tu lo describes es unico, singular que buen proyecto saludos

[@darklyXlit]

you should make a wood puzzle (one of those puzzes that seems impossible to take apart and reassemble) for an episode!

[@GeorgeCarlin88]

hi from Türkiye (turkey) Steve. Really funny video with play-stop music :)

[@tompritch56]

Interesting idea. I never had thought to look and see how those cards worked.Trying to think how those could be used in other ways???

[@theds2003]

that's so cool Steve

[@MakingTheCut97]

The transfer print looked really nice, a sort of vintage look. Maybe a small compartment could be added so it could be a gift box also. Wheres the wooden envelope?

[@deirdrebaker6927]

I love it! A fun card and new music for my Spotify!

[@thisistheendpt2]

great work on the IG bonus video.

[@chrisdelmernj]

This is just an awesome idea! Love the ink transfer, gives it a great look and way better than I can paint. Now you need to figure out how to go into mass production mode for Christmas Card Season.

[@ghairyoemar]

Nice project steve

[@ThePancakeRenegade]

Subscribed just for the Princess Meow Meow Theme honestly

[@KevinJohnson-hi1xf]

I would love to see an episode based fully on finishes.. oils, stains, poly, etc.

[@akefayamenay104]

All it would take is a soldering iron, a bit of wire and a magnet and reed switch and you could have it play when opened again. Replace the three button cells with a 3AA holder and batteries and your hard work could have an almost infinite shelf life. :)

[@riddler40360]

That is a very cool idea!

[@RiotDemon]

Smart tip about the packing tape to avoid super glue.

[@rivera_civic]

Watched this video in my car while waiting for my nephew to get off work, substitute music has good bass to it lol.

[@g.work.specials6859]

This is a great idea!! Gerard

[@coltondavis382]

Awesome project and great video as always!!! Oh an early congrats on 400k subscribers!

[@spoileddogx3]

Great project.

[@brothyr]

Have you had trouble with the spray lacquer melting/distorting the colors? I tried it the other day on a piece of scrap and it quickly became firewood. It made a few pretty colors.

[@ebeddie]

So cool love your work keep it up!!!!

[@Qwertystick]

Thank you Steve.

[@bigguix]

funniest one in a while, gj !

[@elvirak.schuller9449]

Nice project! :D And very handy to put packing tape on your fingers when using super glue...I wish I'd known that the last time I used that stuff, that could have prevented some sticky situations :P

[@nickmazzeo8477]

Great video Steve! Very unique and inspiring about how long did this take to actually build in total?

[@Airfire29]

Hey Steve, long time subscriber first time commenting here. I was wondering if for your next video you can show how to make garden edges out of scrap wood. I just salvaged old fence wood from the neighbor and am dying to use it. Thanks!

[@ronaldcoleman3170]

Ithough that was a great ploject, very good job. Do you have a link to that edge banding provider?

[@hspringsteen]

Love the project this week Steve. Looking at the electronics made me wonder if there is a way to replace the music in the card with what you want.

[@jeffp6789]

There are cards that have recordable units on them.

[@MarceloFreitas70]

That´s a very special gift! Where do you find this amazing images to apply to the projects? Thank you for the great video. Thanks to MicroJig for sponsoring the show.

[@rootmadeiras8735]

Ola Steve, esta de parabens pelo seu trabalho, gostaria de fazer um caminhao, de madeira mas nao tenho ideia de como comecar, sera que voce tem algum projeto, ou faz um video para as criancas, tipo brinquedos de madeira. abracos.

[@orlandoorona5065]

Great project and it does not seem to difficult. Even for me.

[@Rouverius]

Beautiful work... Um, one question. Any thoughts on replacing the batteries?

[@missymzloca]

very fun!!! i want one!

[@a71ea]

Nice and cool👍

[@grandolddrummer]

I'm picturing a Princess Meow Meow cartoon might be in the works.

[@christophercipollone1475]

Another good one Steve! Hey, do you remember where you picked up that glue roller? I keep looking for them. Thanks! - Chris

[@RoughWoodworker]

Great project. I have tried the transfer method on paint and stain, but it doesn't work that great. Bare wood is the best. Great job! look forward to next weeks project!

[@Rustaholic777]

I was completely in shock when I saw the card you made. Why should they have to pull up on that tab? The music should start playing as they open the card. Really as creative as you are WHY?

[@donnamae8987]

I love this! Do you sell blanks?

[@racma8698]

Good idea ! Personally, I protect my fingers from super glue or anything else with medical gloves. Not expensive and full hand protect-able

[@some0ne8]

Great, creative yet relaxed project this week! What is the yellow edge banding trimmer you have called?

[@some0ne8]

***** Cool thanks. I really enjoyed the humor in this week's project, as always!

[@curlyshinobi126]

Hi Steve, great video! I was wondering if there's anyway to take a sound module from any musical greeting card and record your own audio over it to make custom musical cards?

[@l3ender15]

Great tip on packing tape...I hate getting super glue on my fingers!

[@dstarr3]

I do dig that ink transfer method. I need to try that soon. What printer settings do you use when you print on that transfer paper? Photo quality, economy, or in between?

[@roncooper191]

Great job Steve. Can you expand on Inkjet Photo Transfer some time? Regards.

[@roncooper191]

Thanks for that Steve

[@beaudoinjacques4910]

beau projet

[@xBeauGaming]

Why don;t you make a cat shelf for Princess Meow Meow? Cat projects might be a good easy project man.

[@ianmorrow3203]

Steve, I know you get tons of comments every day, but I hope you get a chance to read this one. I really like the Princess Meow Meow theme song! Honestly. Is there anyway that I could download it/find it on spotify? I'd love to listen to the entire thing. Thanks for everything you do!

[@lynbren]

Great idea Steve, my wife loves cards. Now if you can figure out how to put your own voice in the recording......lol

[@brianbooker6214]

This is probably a dumb question... Can you use a router on the edges of a piece of plywood with edge banding? If so would it look good?

[@gangien]

I'm here within an hour, do I now count as one of the core followers??

[@gangien]

***** My life is complete!!

[@dannymiller7860]

Wow! Almost 400k subs!!!! :D

[@Thukfudo]

2:55 I think "sound quality" needs to be *"*_sound quality_ *"* frrom my experience with those kind of speakers.

[@Maxid1]

The Princess Meow Meow theme needs more cowbell.