Greg & Amy recap!

[@Mark-vq9sy]

27 minutes in...gettin' me choked up over here. Your transparency and truth telling about your relationship is something that helps many of us live and love better. Thank you.

[@elde667]

TRUTH guys! Thank you for your thoughtful honesty.

[@hulkmadddhernandez6113]

Thank you for the Real Talk guys livin and learning

[@moulen5359]

Greg. I gotta admit I was not a huge fan in past. Sense all this came up I’ve learned about you and greatly respect you!! So much I’ve sold all my knives to get one of yours. Hands down best knife I’ve ever had . Better yet is what the knife means. Stands for. Etc. wish I could have gotten more. But one Medford is worlds better than 1000 non American knives. Great work. Don’t ever change. Mercia!

[@moulen5359]

Haha and I drove 3 hours to pick up my 187. Apprentice you guys n gals. Fank you

[@clayrowden3916]

I just got my first Medfords (Smooth Criminal and On Belay via Mark's Outdoors 35216) and just watched a few of ur videos. I like your stuff and Greg and Amy seem like real people. Not to many of those bouncing around these days. I look forward to getting to know you guys better. Can't wait to see Medford represent at Mark's Knife Show 7/8-9.

[@vikenc9403]

You guys are a breath of fresh air!! Keep rockin !!!!😊

[@bamaknifeguy]

I shoulda grabbed that M48 while I was over there talking to ya brother. Also I’ll be on the look out for that stolen knife. Thanks for taking the time to talk with me and Steve and Tim Reeve. 🤘🏼🇺🇸

[@phillipfitzpatrick8207]

Hey guys, the interviews with the other manufacturers were cool to hear other perspectives - keep it up 💯

[@MedfordKnifeTool]

Yes, it was good to hear the challenges they deal with as well...lots of similarities.

[@ChazLikesSharpObjects]

I got my first Medford about a yr ago (a Theseus) and I couldn’t believe how nice it was.. i am now the proud owner of 5 Medford knives. they are the Crown Jewels of my collection.. You dont understand till you understand (after you hold one in your hand)

[@MrBowser2012]

My first Medford arrived today! I already have my sights on the next.

[@MrBowser2012]

I somehow missed "shirtgate" when it happened, but after learning about it and seeing the predictable reaction from the ultra-snowflake, cancel-culture crowd, I started saving my money to buy a Medford. My very first Praetorian arrived today! I am already looking for my next Medford. USA is worth fighting for!

[@JimiJamesIII]

Missed the live stream. Good luck with your steel acquisition, makes sense. Great to see Amy and you on the vid.

[@MedfordKnifeTool]

Thanks James!

[@BLADESANDFADESOFFICIAL]

Hey Greg, I really like what you are doing and what you stand for! I’d love to check out some of your knife models to analyze them and see what they are all about! Not looking for any handouts or free stuff, if you have any samples you could send out as loaners or whatever that would be awesome! I am a smaller channel on a even smaller budget but I have a extensive variety of knife reviews, sharpening videos, modification, maintenance, customization and more. I have the same values as you do and I am not shy about calling things how they are. I take pride in the fact that all my reviews and analysis are 100% honest and unbiased! I encourage you to take a look at some of my content and considering my proposal! Thank you brother, Sean

[@chriswhite9256]

Excellent video on American knives and the industry in general. Keep up the awesome work MKT! You have my support!👍

[@rwp722]

It's great to see you two in the same video - it kinda reminds me of the time Dolly Parton and Kenny Rodgers sang about an Island somewhere - I don't remember the name of the song, but I know I liked it. I'll say China knives, in general, are damn fine knives and at a reasonable price point." That's good because it keeps American knife makers on their toes. If you need a knife because you lost the last one you were given, the price will be your primary consideration. Civivi will win that argument - there is no "novice" that is going to buy a Medford. Let the "Entry Level" knife enthusiast eat their cake because sooner or later, they will want a nicer American-made knife to be proud of.

[@MedfordKnifeTool]

Good point Randy. Thanks for the feedback!

[@markcoffman494]

Got my first slim praetorian and I am sooo happy with it!

[@MedfordKnifeTool]

The Prae Slim is an awesome model. A nice contrast to the thicker models for sure!

[@stephenlukovich9648]

I friggin love you guys and will always have your back. We need more Medfords

[@MedfordKnifeTool]

Thanks Stephen!

[@brucedelventhal7291]

I like Amy’s shirt idea . I would get one for sure.

[@MedfordKnifeTool]

Working on it! - Amy

[@byronkennedy7912]

Nice video. For many reasons. First, the shirt was a HUGE success because it accomplished the goal ... be provocative with retrospect. Second, the economic/political peril this industry (and country) faces when (foreign/'enemy') raw material suppliers decide to say "No ... Molan Labe" is huge too. Good luck with the acquisition ... sooner better than never. Thanks.

[@davidweintraub9864]

We do that at our (electronics) factory in California. It always makes me wonder how companies that don’t own their own production facility can do any CQI on the fly.

[@Knives101]

I personally support Greg (and Amy) and always have. I really enjoy how he isn't afraid to speak his mind. People are way too damn sensitive these days and are so quick to say people are either racist or homophobic. It really makes me think that the people that are screaming that, are really projecting that shit bcuz they actually think that way themselves. If people are looking at something that is not racist and automatically thinking it is racist, maybe they are the one's that are racist themselves.

[@MedfordKnifeTool]

Valid point.

[@southside1975]

Where can I get that shirt?

[@shaunharrison9618]

Got my first Medford at the show. Got a slim midi in MagnaCut. Love it!

[@coobay4786]

I love all the facial expressions Amy makes.

[@MedfordKnifeTool]

Haha!!

[@paulsouders3489]

You guys are great. I've been eyeing your knifes for a while probably would have had one by now but its a hour and half drive to go see one I've been leaving the snap-on truck alone lol its in the works I will get a knife lol

[@MedfordKnifeTool]

Keep on trying....it's worth it!!

[@zebulunstadler9902]

Such is life. You guys are great

[@natewesley8507]

That’s a smart move Greg DO IT

[@johnruff7417]

Blade Show, the shirt and your recent videos have re affirmed my love for you guys and Medford Knives!

[@MedfordKnifeTool]

Haha...we just keep on keepin' on! There is no other way.

[@med_head]

You guys PLEASE come to Blade West!

[@slick_slicers]

I’ve just seen the T-shirt. What a storm in a teacup!

[@Cameron_OKG]

Those were super chats Gregg . he was donating money to you.

[@ChrisSmith-gy9zp]

I love you guys and your knives!!! Keep it real and keep the knives coming.

[@MedfordKnifeTool]

Always keepin' it real. Thanks Chris! - Amy

[@stevenstroupe3805]

What is up you two. I have a? Sorry. Don't own a Medford knife. But was curious as to if you have a push dagger knife in your line. And on the shirt. Too many people now days have very thin skins. The truth will stand when the world is on fire. I think I am not the only one. A lot of American people are pissed off. Don't let it get to you. You have Americans who love you guys. Only the strong survive. Medford knives.

[@SharpenedSteel1]

Ripped me off years ago. But I respect the hustle.

[@MedfordKnifeTool]

Bull fucking shit. NEVER ripped anyone off EVER.

[@greghaddock8316]

People don’t recognize passion any more.

[@jamesBGgarner]

Fukem Greg!!!! You have millions that get you brother. Greg for prez!

[@shaunharrison9618]

True Americans. Love you both!

[@MedfordKnifeTool]

Thanks Shaun! - Amy

[@sicsempertyrannis9224]

I do my level best to support USA makers as much as possible. Too many people make excuses for things they can control. 10% choice 90% consequences. Countries that are friendly competitors are good to buy from. China is the antithesis of a friendly competitor.

[@MedfordKnifeTool]

Very well put.

[@BetaBuxDelux]

What happened with knife center now? I’ve ordered a couple of items from them that haven’t shipped…

[@mj1653]

Same. Emailed them and found out the in stock item I ordered wasn’t actually in stock because it went out to pre-orders. Lame

[@MedfordKnifeTool]

They publicly stated that they will not be carrying our knives anymore after the T-shirt reveal.

[@wesshelton1406]

Where are Yeti ramblers made?

[@davidwatson3041]

What did the shirt say?

[@MedfordKnifeTool]

If you email me directly, I'll respond with a picture of the shirt - Amy M. ([e-mail])

[@snakeinthegrass4726]

Where can I see this shirt I keep hearing about??

[@MedfordKnifeTool]

They were all given out the first day of Blade Show.

[@ianesterhuizen9179]

Oh my G_d. Thats too funny! Yes. We need a "Bull in the China shop" shirt. I'll pay good money for THAT one. Fank, you fank you Mistel Gleg.

[@MedfordKnifeTool]

Fank you too! - Amy

[@davidhoffman3590]

Thank you for having the balls to tell the truth...if the truth doesn't hurt...someone is lying to ya...keep up the good fight....

[@danwright5499]

Going through a divorce right now. You guys are truly inspirational

[@MedfordKnifeTool]

Each day brings a set of new challenges and successes. Thank you!

[@dsknives310]

Some ❄️’s melt on their own body heat. Love wht you are trying to do & hope it works out. Completely agree how China 💩 gets repetitive & unoriginal. I’m a knife guy so I get wht I like but We can’t all soft serve our opinions. So Thanx for standing your ground & not giving a 🤬. By the way my Slim Midi is “Top 5” in my collection. 💯👊🏼🇺🇸

[@ericpitre4031]

Love the vids, only whats with the gangster fingers? You are a military badass. Plz dont give credit to any true gangster. You dig??

[@MedfordKnifeTool]

No idea what your talking about

[@ericpitre4031]

@@MedfordKnifeTool the peace sign you make for pics or during the video. Now you know. Its putting gangsters on a “cool” pedistal. It kinda goes againt patriotism, freedom, you know , all the things we are trying to restore in America. Oh, and Liberty. Im gettin the Proxima soon!! Lol

[@bigjohn3038]

As a UK 🇬🇧 Guy who will not buy PRoC Knives because of their Human Rights issues, I support the message! USA Made is cool 😎 but anything but PRoC made is my mantra. Solidarity Brother. 👊

[@EVOINTENTION]

keep it up ... great video!

[@BetaBuxDelux]

I just made a couple of donations because you guys are awesome.

[@MedfordKnifeTool]

Omg so funny I had no idea what that was!!! Our artist came in and was like, “hey Greg, that’s a gift…” We were cracking up.

[@S8NSAYS]

I love your knives, and I truthfully appreciate your candor, but I feel like you should own your consequences equally as much as you do your opinion.

[@backwoodsman4854]

How is he not owning any consequences good or bad of his actions? Who else is going to receive his consequences? Really don’t understand your statement, no hate intended towards you.

[@MedfordKnifeTool]

Not sure what you mean by that. We deal with and own up to our consequences each and every day.

[@everydaybladesinc]

Just keep being you. 👍

[@balkanknife5696]

All I can say is that I need that t-shirt and big support from Croatia 💯

[@MedfordKnifeTool]

Working on a new shirt design as we speak....stay tuned!

[@Curmudgeon12]

Trying to find American made has become near impossible. As far as the hate, it is easy to be brave from your keyboard.

[@MedfordKnifeTool]

Yes it is. Again, zero accountability.

[@dananichols48]

That sucks you guys split, praying for you both! It sounds like the business hurt your marriage! Sounds like there something still there!!

[@MedfordKnifeTool]

We have done and continue to do so many things right...thank you for the support!! - Amy

[@RookCustoms]

Bull in a china shop doopppe

[@AtafalWonder]

I'm tired of hearing about this shirt...unless you have any for sale.

[@MedfordKnifeTool]

Haha!! I wish we did, but working on a new design.

[@JM-sn5hm]

Nice of you guys about Knifecenter but... they won't get any more of my money.

[@jsw4178]

They won’t get mine either! I was about to buy a Nosferatu Auto from them and they removed it. I’m done with Knifecenter!

[@davidmajor3632]

My biggest issue with KC is their hypocrisy. They drop Medford but continue to sell thief Jake Hoback knives who literally ripped off their customers. That tells me exactly where their priorities are. Strictly appearances

[@Doug-do7ge]

Love your take guys. Keep going at it

[@samgifford4121]

Great Team! Teamwork makes the dream work!

[@wood50]

You two are awesome, keep up the good work 👍✌️🇺🇲

[@Strow1stofHisName]

All I will say is these people have changed the definition of “raciest”. I refuse to accept it. They aren’t allowed to move the goal post when it comes to what it means to hate someone for what they are. Simply pointing out something that applies to Asian or Black or whatever. Calling out people on bullshit because there is bullshit isn’t raciest just because Asians or who ever are the ones practicing bullshit.

[@MedfordKnifeTool]

Agreed. It just keeps getting sillier and sillier.

[@kozmo7]

Is it someone’s ethnic and cultural background that makes them bad or is it just bad people, who come in all walks of life? Something to think about

[@mbaleey8561]

you guys should get back together......

[@jumping438]

Just placed an order for a knife. Keep doing what you are doing.

[@MedfordKnifeTool]

Thank you!

[@jsphkolbjr]

Keep telling the truth and love your knives.

[@bmarsh8343]

Love the bull in a china shop shirt idea! I also love the shirt that has everyone so butt hurt too. Great video you guys are awesome! 🇺🇲🇺🇲🇺🇲

[@MedfordKnifeTool]

Lots of chatter for sure!

[@natewesley8507]

I’ll never forget the day someone stole the super nice praetorian ti my now deceased grandfather bought me I feel your pain man it had a vulcanized tanto and everything that could be flamed and faceted was it was the prize of my collection until some ass hole stole it and I’m pretty sure I’ll never see it again it just sucks extra hard because it was a gift from one of my heroes ya know always remember what goes around comes around sooo

[@MedfordKnifeTool]

I'm so sorry. That is such a shame! Email me at [e-mail]. I'd like to chat. - Amy M

[@auggieedc205]

Americans supporting American Manufacturing should never have become a political stance in the first place, that's the root of this whole "issue." The Knife/EDC community was the only remaining place I could direct my energy into something without it becoming political.... needless to say I ended up closing my IG after the Hinderer nonsense. Just keep making amazing knives in America and I for one will be happy!

[@MedfordKnifeTool]

I agree with you 100%. This tells you how messed up things have become - Amy M.

[@mikeflamion7915]

hey guys

[@MedfordKnifeTool]

Hey Mike! - Amy

[@channelzero8916]

The sad part is we make less and less goods in the USA and to see a company so proud to be American made being dam near crucified for it is a shame. Put whatever you want on a shirt I don’t care as long as it’s made here.

[@knifetoucher]

Murray Carter was having knives made in China? I thought his was all hand made here.

[@MedfordKnifeTool]

No one said anything about Murray Carter. I believe his knives are made at his forge only.

[@jesseadams45]

@@MedfordKnifeTool I think he was reading into you saying "nobody but Tim was only US" or however you put it probably not remembering Murray when you made the comment. At least that's my take.

[@kosher8720]

I’m down with you all! FYI Super Steel Steve laid it out perfectly: kzbin.info/www/bejne/eKKvd4Skg7J0o5I Keep bringing the bad ass knives! (Like Infraction w/dragon scales & vulcan blade, hint, hint)

[@shaunharrison9618]

He is a great guy. I saw that too

[@danwright5499]

Just obtained my 8th Medford

[@MedfordKnifeTool]

Nice!