Hyosung GV250 Starting problem

[@gregtoope]

So had a friend of mine come over (who is an auto mechanic) and he took of my starter to see if that was the issue. Starter wouldnt fire, so he took it apart. Looks like the seal on the starter leaked and the whole starter was full of oil. SO anyways looks like the starter is shot! Just finished ordering a new one. So $90 for a new battery and $100 for a new starter. Should be running nice once the starter actually arrives! Will post a follow up video once the part arrives and is installed.

[@samuelpenner2701]

What was the problem..Mine is doing the same thing

[@gregtoope]

Not yet. Took the battery in to get it tested and the test came back saying that the Cold Cranking Amps were really low. Which made sense as to why the bike wouldnt turn over. So replaced it with a new battery. But still nothing. Still getting that same 'clicking' sound. May have to take it into the shop to get it looked at.

[@MP-rj3xt]

Its Relay issue nothing else👍🏻

[@jasonahbh4880]

Change start motor. Or clean it .

[@anthonyattard9234]

I see you sorted it out but I can bet that's not the culprit. my gv250 does the same thing if I don't turn off the fuel tap. The fuel taps on these are terrible, even turned off they leak very slowly (I have an inline tap between it and the fuel pump now). What happens is these carbs don't shut off the fuel when the float bowl is full causing the front cylinder to fill with fuel and the bike wont start. Mine does this after 5-6 hours if I forget to turn off the tap. The way to check is to remove the fuel return line off the carby boot on the front cylinder, I guarantee it will be full of fuel. Also if you take your oil filler cap off your oil will smell of fuel that got past your cylinder rings!

[@elsiesam8619]

Hey man I got a same bike as yours but won't turn over when starting

[@gregtoope]

sadly dont have this bike anymore. the hyosung was my first bike. Im on bike number 4 now!

[@azteca8037]

It's the solenoid

[@S161064]

forgot to mention try cleaning all contacts on starter and switch.make sure everything is tight .maybe just a bad connection. rsmf.

[@gregtoope]

no it was the starter. Took the starter apart and it was full of oil. Looks like the main seal that separates the starter from the motor leaked and the starter filled with oil. Which wrecked the starter. So anyways a new starter has been ordered and should hopefully be here before the end of the week or beginning of next. Hopefully!!

[@S161064]

OK mate at least you got it sorted.look forward to watching more of your videos. i have subbed you buddy.RIDE TO LIVE-LIVE TO RIDE. rsmf.