How to Template and Scribe a New Floor - Budget Van Build Ep 11

[@kstewart3657]

This is THE “how to” series. Do it right. Do it the Virgoe way. 👏

[@GregVirgoe]

That is awesome 🤩 I’m really hoping this will be a one stop shop for everyone who wants to do a van conversion 😊

[@GrasshopperGardenServicescouk]

The big man

[@trevorelliston1]

One of the most informative videos I can recall, discussing in clear and concise terms simple but effective techniques, demystifying in the process.

[@GregVirgoe]

@@trevorelliston1 hi Trevor, I’m really pleased that you found it to be useful. Thank you for taking the time to leave me good feedback 👍🏼

[@mikespeers8281]

Great information Greg. Thanks. 👍🇮🇲

[@rickhadfield1097]

Best van build series by far, not these young couples who have no,clue what they are doing and living off patronage!

[@ivanriverooo]

Spot on... show the process not skip it or speed it up. Sick and tired of those videos. We all love you Virgoe! ❤

[@GregVirgoe]

I appreciate that, it means a lot that you like the detailed content

[@kevinsmith2994]

"Fits like a glove".........simply the best tutorial you will find on KZbin if you want to self build your camper

[@GregVirgoe]

With a little care and patience it is possible to get great results 👍🏼😃

[@gray159]

Seen lots of these videos and find Gregg the absolute best..trust him impeccably.

[@ThePaulSH]

I had to subscribe, it's just so addictive watching someone build a van explaining each step in such an easy to understand way.

[@GregVirgoe]

Thank you 🙏🏼 your support is very helpful 😃

[@suffolkseries3319]

Love the fact you show us how to make a scribe, rather than buying plastic s**t of the internet. Fits like a glove! 😂 Good work mate.

[@GregVirgoe]

I know I have shown this before but there are so many new viewers that won’t have seen the previous video so it’s worth doing again. Comments like yours make it so worth while. Thank you 🙏🏼

[@emmaslow]

I have high hopes as I start watching this video that I might finally grasp how to scribe 🤞🤣

[@emmaslow]

So simply explained. I'm going to give it another try! Thanks 😊

[@GregVirgoe]

It is quite easy. Just two things to remember. 1. Set your scribe to the widest gap distance. 2. Keep the scribe at 90° angle to the face you are copying. Try scribing a piece of cardboard first if that fits we’ll use that as a template 👍🏼😃

[@philipbudd3741]

The bible to van building, thanks

[@christianhall3034]

Watching that first scribed cut fall into place was soooooo satisfying 🤣

[@GregVirgoe]

Yes I love it when a plan comes together. The back angle helps loads to get a first time perfect fit.

[@peterwooldridge7285]

Just love the gentle approach you take and that you assume nothing. Thanks G

[@GregVirgoe]

Hopefully there’s bits of advice to help everyone from novice to experienced. Always picking up little tips all the time. 👍🏼😃

[@13311892]

For a guy like me with no skill or knowledge, your how to videos are such a relief and so do-able. Thanks so much!

[@popdroprolld20]

Here is me watching, hoping that at the end of this series the van will be given away to a viewer, who really needs it. Love the video, detailed as always. Good you see someone talk you through a process and not just have cuts and cheesy music over the top

[@FionaJayneA]

Boring Sunday afternoon just became interesting! Cold drinks all round! So many people dread scribing. You have shown us that you don't need any fancy scribing tools and that actually, it's not as daunting as it seems. Another great detailed tutorial! Cheers 🫡

[@GregVirgoe]

Yay you got the first comment in 🤩🥰👍🏼

[@bloochoob]

Others say it too, and thousands agree, that Greg Virgoe is THE ORACLE when it comes to van life builds. My number one go-to-guy - and he should be yours, too. 100% expert engineering - logical, precise, a great teacher, and all delivered with good old fashioned common sense. Best ever channel on the subject. 🥳

[@GregVirgoe]

Wow 🤩 I’m blown away. You’ve made my day 👍🏼 Thank you 🙏🏼

[@bloochoob]

@@GregVirgoe You’re welcome! Have a great bank holiday weekend 🥳

[@masonman1]

Just bought a fiat ducato! i watched every one of your sprinter series videos. Thanks for inspiring average joes to attempt their own conversions. your videos are invaluable thank you.

[@GregVirgoe]

How exciting a new van to build out. Have you got your plans set out already what you want to do with it? Hope it goes well 👍🏼😊

[@alanhardaker6101]

Best instructional video's ever. No unnecessary chatter, just matter of fact and well explained. Thanks.

[@Jacqwar]

My favorite part of the video 21:53 😂😂😂 good work sir !! 👏🏼 These videos are so helpful !! I’m currently doing my subfloor with your virtual guidance 🙏🏼

[@ben2e0omr]

They should teach this stuff at school. A very informative and good explanation. Thank you Greg.

[@GregVirgoe]

You are most welcome 🙏🏼 thanks for leaving a nice comment 😃

[@goofe.washington953]

An uncompromising dedication to quality and accuracy makes your work all the more enjoyable to watch - in addition, of course, to how much I learn from watching them. Thank you for posting them.

[@GregVirgoe]

I’m glad you find them to be useful. I’m trying to add many tips that may not be obvious to inexperienced diy’ers 😊

[@xboxcrazee]

Your skills at cutting a straight line with a jigsaw are legendary 👍👍

[@GregVirgoe]

I often hold the base with my other hand and run it along the edge of the board like a fence guide. Take it easy and don’t try to go to fast. That’s the key 😊👍🏼

[@Regi869]

Are jigsaws prone to not cutting straight? I've always had lots of issues with them. Thought I had a faulty machine.

[@tonystacey3347]

I’m in awe of the jigsaw accuracy- yes dewalt are top end tools but I’ve given up trying to cut anything with jigsaws. I have however got a tracksaw which is a game changer for accurate strait sheet cuts. One thing you didn’t mention was blade depth being just a tooth more than the board width makes for a better cut. This vid will be useful for all van builds - everyone has to go round a wheel arch! Bet it gets h high proportion of future hits👍🏻 The big thing here is the work you did with the insulation and the battens on which you’re laying the ply. Don’t scrimp on this or 12mm ply will wobble/bow under weight of thing standing on it. A really top class “episode” with this one Greg - mr V - I salute you!

[@GregVirgoe]

@@tonystacey3347 thank you Tony, you are dead right 👍🏼 the reason I can get away with using 12mm for the floor and not the usual 18mm for flooring is the closely spaced battens and the screw fixings to keep it well secured. Thank you for such a great comment 🙏🏼😊

[@desmondobrien68]

Greg is The van build guru

[@GregVirgoe]

That’s very kind of you 😊

[@MrLPetronis]

Greg is the man. Makes me want to sell my converted by somebody else van and do one my self 😂

[@andrewbiddlecombe319]

Love watching you work Greg, itching to get started!!!

[@joline2730]

Greg: "I'm gonna do two videos a week" has gone AWOL ‼️ Yes, I know, it's too hot to be working in a tin van ... still, I'm looking forward to the resumation of this Master Class Greg - hope u are enjoying the summer ... 👍👍💯

[@west-coast-willy]

I started Vanlife 5 years ago and Virgoe was always a go-to for me. So glad he's still growing and living the life. 🤙

[@GregVirgoe]

How’s vanlife been going for you? Still loving it I hope 🤞🏼🚐🤩

[@west-coast-willy]

@@GregVirgoe Oh my god he's talking to me. 😯 Be cool, be cool. I love it my dude. Sometimes I lose it when I can't figure out what wiring nightmare is causing my battery to die everyday, or when I get a sudden itch to remodel everything, but I wouldn't trade it for the world. I love the freedom it gives me and enjoy the challenges that come with it. Your videos are always such a great inspiration for building a van that's unique to me and my family's needs.

[@GregVirgoe]

@@west-coast-willy that just great 👍🏼 the freedom is such a huge benefit. You can have a different front garden every day and you don’t have to cut the grass 🤣👍🏼 Keeping the batteries topped up can be a challenge in winter you have to change the way you use things. Like charging tech during the day and not at night like you do at home. Turning the fridge off at night in the winter when you go to bed. Simple things to keep you going. But we’ve also loved the last 5 yrs travelling 😃👍🏼

[@peterdufton1067]

Riveting watching. I’m spending all my hours watching these fantastic videos. Thank you Greg and please keep them coming. 👍🏻

[@colinb8327]

Just discovered your channel, and can only thank you, you’ve answered so many of the questions I’ve had on how to do things and saved me from some seriously expensive mistakes. Im currently recovering from having 6 growths on my lungs and going through a gradual “rehab” (physio, weight loss due to piling on pounds through the meds, return to exercise), to get me back into shape and racing again. As a result I’m looking at making a Peugeot Boxer camper with bike slides, to make my life easier (with transporting the bikes, nutrition, and all the other things that go with it), so your series has dropped at the perfect time! Thanks once again and keep it going, you’d be surprised how much your helping people in ways you hadn’t realised.

[@GregVirgoe]

Thank you for sharing your story Colin I’m pleased that you are on the road to recovery. You sound like a very strong person so I’m sure you will achieve your goal. Thank you for joining the channel and I hope the videos continue to help you. Best of luck to you 🙏🏼😃

[@stitch4076]

Thank you for explaining the saw blades and the significance of the two different facing blades. I finally get it! Keep up with the detailed videos. Loving this series

[@GregVirgoe]

Most blades are up cutting because the pull against the saw base and work like a scissor pulling the base down to the workpiece. Sometimes you need to cut on the face but don’t want loads of chip out. So that’s when a down cutting blade is really handy. Just have to take it easy so it doesn’t jump around.

[@paulluggar5964]

Easy way to avoid 'tear out' on any cut is to simply set your saw to only cut a few millimetres on the first cut, then set it 'just' over the thickness of the material being cut on the second cut. You will be amazed how well this simple trick works! Keep the vids coming, love em! 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@GregVirgoe]

I’ve also seen people make a backwards score cut then cut full depth. What are your thoughts on that? 👍🏼😊

[@paulluggar5964]

@@GregVirgoe Never tried that TBH, content for another video trying the different methods? You can face cut laminate using the shallow first cut method as well. 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@roymills2564]

i work for a saw suppliers and sharpening company and we always recommend having the blade no more than 10mm deeper than the wood your cutting to get the best results

[@Apym289]

@@roymills2564 my thoughts exactly

[@russ1046]

I really like your build videos. I think it is partly because you reason all of the decisions/methods. I don't think there's ever a question that comes into my head that you don't answer 😁

[@GregVirgoe]

That’s really great to hear. Sometimes after the jobs done I think oh I could have mentioned that but then the videos would end up being so long they would get the views 🤣😊

[@niallbrady187]

You are fantastic at explaining everything, I have learned so much from you, I thought I was a good at DIY until I seen you. Your step by step is brilliant, thank you very much. Niall (Ireland)

[@GregVirgoe]

You are so welcome! I’m pleased you found it to be useful. 👍🏼😃

[@055sos]

Some great little tips for the DIY teams...well done Greg.

[@GregVirgoe]

I’m pleased you found it to be useful. Thank you 🙏🏼

[@richardlees5303]

Having rebuilt two boats across my construction life I really appreciate seeing your methods and attention to details. Nice to have a yard and shop. I've been known to build in cabinets on the dock! Love the benefits of working like that. Stretches the brain.

[@toronado455]

17:26 this is such a great idea! This angle really helps get the board snug to the wheel arch. Thanks so much!

[@GregVirgoe]

Yes indeed, there is always a small radius that you don’t account for that makes the floor hard to fit. This 15° allows it to lay flat first time 👍🏼😃

[@CihaPet]

Love the way that you walk through it. Steps and methods that are easily adaptable to ANY size/shape van.

[@GregVirgoe]

A lot of these diy skills you can apply to any project not just vanlife. 😊

[@philwilliams23]

Absolute legend! Never really understood scribing properly before - now I do! Absolutely idiot proof. Thanks again Greg, keep up the amazing idiot proof content, it's much appreciated.🙂

[@GregVirgoe]

Thank you 🙏🏼 I’m really pleased it has helped you and I’ll continue to add in these useful tips. 👍🏼😃

[@anthonywhite6530]

Thank you for sharing

[@dennischapman7944]

Cheers Greg, a well informed video with no rushed bodge jobs. Always a pleasure to see you at work knowing the job will be perfect. Good luck with the build All the best to you and your family

[@GregVirgoe]

Thank you so much for leaving such nice feedback. Your comment make it worth while 👍🏼😃

[@philw4625]

The detail is what we come for!!

[@GregVirgoe]

My plan is to show the bits that are often skipped over. 😊

[@Dickie2702]

The simplest and quickest way to scribe is just use an old fashioned school compass. Got mine in a geometry set when I went to senior school and I've used it my whole working life.

[@GregVirgoe]

That is the perfect solution as you can adjust it to suit any size gap. Very good tip 👍🏼 thanks for sharing it 😃

[@thelawman]

Everything is in the detail. So many future builders will follow this series section by section and enjoy there peoject all the more. This is what the armature needs. Keep it going in this format its a joy to watch you at work. The young girl is doing well on the camera to.

[@GregVirgoe]

Yes I certainly hope it will become a step by step guide to help anyone wanting to do this too 😊

[@alandickens2446]

Cheers Greg 🙏❤ you have been a country mile ahead of other camper tutorials. Well done mate and thank you 👍😎😍

[@pedrolg]

I hope you're enjoying this series as much as we are. Thanks!

[@GregVirgoe]

I am enjoying making these videos. I find the technical ones easier to produce and it’s great to share knowledge 😊

[@passenger3]

Tha Man's Back in Action 🎬 😎 Always a pleasure to see your work Sir. Top Notch Greg as per mate 👌 👏

[@GregVirgoe]

It’s a pleasure to read your comments Nick. Makes it all so worth while. Thank you 🙏🏼 😊

[@passenger3]

@GregVirgoe we all appreciate you Greg and your work. And you're very welcome, buddy.

[@greenspiral2955]

Love it and will be watching this a ton before my floor is actually down. Thank you for you patiencein explaining so calmly how to go about the actual process & thank you silent helper too, fab team.

[@GregVirgoe]

I will pass on your well wishes to Lou. 😊 thank you 🙏🏼🤩

[@Simon_PieMan]

This video series is on another level. Easy to recommend.

[@GregVirgoe]

I really appreciate any recommendations 👍🏼😃

[@abbeabbe96]

We just bought a fiat ducato 2016, so this series could not be more perfectly timed. Thanks for another great tutorial! 💪

[@GregVirgoe]

That’s great. Hope you get lots of useful tips from it. 👍🏼😃

[@palmersmotorhomemagic7701]

Craftsman! Great video I learnt a few things watching that.

[@GregVirgoe]

That’s great 😃 then the video has done it’s job 👍🏼

[@petewarby7158]

Yet another brilliant video... this series is shaping up to be the newbies masterclass, thanks Greg.

[@GregVirgoe]

Thank you Pete, glad you like it 😊

[@matthewporter6890]

Thanks again Greg for another great video in the series - I learn that you can actually get downward cutting jigsaw blades and I was particularly impressed with setting the angle to 15 degrees for the wheel arches - attention to detail!

[@GregVirgoe]

These are the little tips that make a huge difference to the quality of the finish. Pleased you found it to be useful 😊

[@JohnnyCash-uw2dk]

Like a glove. Great tutorial Mr V. Thank you!!!!!

[@GregVirgoe]

Gotta love that Jim Carey quote. Me and my son Josh used to crack up at his films. 😂👍🏼😃

[@JohnnyCash-uw2dk]

Yes he is quite the character. Really enjoy your sense of humor while combining it with your build expertise. Thank you again for the wealth of information!!!!

[@GregVirgoe]

@@JohnnyCash-uw2dkno, thank you 🙏🏼 for taking the time to watch and comment. You make this channel

[@Loulivesbig]

When I realised this series doesn't finish I almost cried, I was fully following along with my build. We miss you Greg!! They are second to none.

[@atilla101uk]

Always a pleasure these videos

[@GregVirgoe]

Thank you for watching 😊

[@atilla101uk]

@@GregVirgoe it’s my pleasure

[@viv-i-vangoesforth]

perfect Job, Greg and beautifully filmed. I'm loving this series very much. Best regards- Kenny

[@GregVirgoe]

I’ll pass your compliments onto my camera lady Lou 😂 But got to be careful in case she starts putting in for a raise 🤩👍🏼

[@getawaygeese]

Great tip on tear out - general tip so useful for me. Same with jig blades Nothing more fulfilling than a profile cut fitting spot on …. Or is it just me Brilliant

[@GregVirgoe]

When you slide the piece into place and it’s fits snug it is a great feeling 😃

[@russfoggan4092]

Greg suspense is killing us!!!!

[@GregVirgoe]

Sorry 😢 back on it again tomorrow. 👍🏼

[@kvonahlefeldt]

Thank you Greg I am attempting to do my own van build. My late husband was a great woodworker. It warmed my heart seeing your wife/partner/friend holding the board while you sawed. My build will take a long time as I don’t want to rush it and make mistakes. I’ll keep watching your videos for guidance.

[@mausie1967]

I like....., no I love your tips!!!

[@GregVirgoe]

I love your comment too 😃👍🏼

[@sharoncrawford01]

Brilliant to see the Master back at work Greg! Fantastic job and excellent video 🙂

[@GregVirgoe]

Hey Sharon, hope you are keeping well and enjoying vanlife 👍🏼😃

[@folkerwulff]

A very nice job on the floor Greg. Well done!

[@GregVirgoe]

Thank you once again. Really appreciate it 👍🏼😃

[@rafiquenazir6281]

Thanks for another informative and well explained video. Thanks.

[@GregVirgoe]

I’m pleased you liked it 👍🏼😃

[@zetalogic]

Hi Greg. I've been following you from your first video without skipping any of them. You're doing good and I must say that you're outstanding. I've been learning from you much. After I watched your videos, I owe the same van which is 2009 model Peugeot Boxer 17 m3 as you know that's the biggest in theese platform. I'm verry happy with my van and converted it to a campervan myself. I'm 57 year old retired guy from Aviation Industry where I live in Türkiye. : ) I'm looking forward to Ep 12 and on. Please please keep continue as much as detailed as you can. Don't leave us alone. : )) With my best wishes. Bye..

[@GregVirgoe]

We are back from our short holiday and new videos will be out soon 😃

[@hopesfreedom2322]

Like the use of a piece of cardboard at the end of the board to help move the board into place and maybe not snag the silver tape 😉👍🏼

[@GregVirgoe]

Yes at 18:22 I placed a scrap of card on the foil covered floor so the board would slide easily and as you say not tear the foil below 👍🏼😃

[@tinam7979]

That was brilliant to watch , fascinated me watching how you do that scribing 😮 how blinking clever x

[@GregVirgoe]

Ah thank you Tina, lovely having you guys watching this series. How’s your house renovations going? 🥰🤩

[@tinam7979]

@@GregVirgoe lots of painting to do , currently digging up the garden but we are very happy . Next time you’re visiting Mr and Mrs b book yourselves in here for a meal x be lovely to see you x we do miss everyone we met in our short time in the van x

[@GregVirgoe]

@@tinam7979 oh yes that would be lovely. We will do that 👍🏼😃

[@gazsweet]

This guy has a gift for teaching 👌

[@GregVirgoe]

Thank you very much 🙏🏼 that’s really nice 👍🏼😊

[@raykillick2579]

Thanks again Greg for another great video.

[@GregVirgoe]

You are most welcome Ray 👍🏼😊

[@MiniLuv-1984]

Some great techniques and tips there Greg. Thank you sir!

[@GregVirgoe]

I’m glad you liked it 👍🏼🤩

[@Regi869]

👍👍👍 I love that you show the actual "how to" parts of the construction. Excellent tutorials Greg 😊

[@GregVirgoe]

Yes I think it’s important to see it being actually cut. So many videos skip the work bit and you just see a finished product but that really doesn’t help. So thank you 🙏🏼😃

[@rudivandoornegat2371]

Nice job! The floor as well as the video. I'm fascinated by scribe techniques. 😄

[@GregVirgoe]

Just don’t get me started the washer technique 😂 I was even toying with doing a dedicated video

[@spiket4]

Another great how to tutorial Greg.

[@GregVirgoe]

Thank you very much 😃

[@marksadventures3889]

The usual quality we've come to expect Greg, all good. Plus the screen scans are an extra feature that no one else offers.

[@GregVirgoe]

I know a lot of people watch KZbin on smart TVs these days so it’s so much easier to get to the links than looking for a description. Thank you for great feedback I will keep adding those. 😊

[@marksadventures3889]

@@GregVirgoe I watch on either my phone, laptop or desktop computer that has 2 large screens 23" with 4k resolution - designed for a hobby of mine although sometimes I get income from it, making scores for budget films. I can conjure a full orchestra with the right software. Some are interesting films - some are B movies for fun.

[@GregVirgoe]

@@marksadventures3889 very similar style of software to our video editing suite with multiple tracks for different things. It’s amazing what you can do now and film quality software is available to the hobbyists these days. 👍🏼😃

[@briankeane6429]

Well Greg, I can honestly say it’s spot on watching everything that you’re doing. Keep up the good work up to meet you at one of the festival sometime as I have been a subscriber now for 12 months and I’ve still not started to tell you the truth I have started, I was just gonna say I’ve not started on the van but I have started to put the flooring today. Should finish it off tomorrow. Obviously rain stop play but just loving everything but I’ll get over it over the year buying bits and pieces off, obviously watching yourself and John on Mandy you truthfully are an inspiration I’ve even that she brought my wife into this, even though she’s an air stewardess. It’s one of them things, even though it’s only a small wheelbase Vauxhall vivaro which she does called the postage stamp, but when she sees it finished, I’ll be a total different but it will be just the weekend. Thanks for everything. Keep up the good work.

[@GregVirgoe]

Lou took a bit of convincing when we first started but now loves it. So I’m sure once you start using it the freedom and places you can visit will get her hooked. 👍🏼😊

[@shortnewsitemsinfrenchwith1831]

Brilliant practical and educational videos. I'm glued to them and can't wait for the next. Thanks, I'm learning so much.

[@GregVirgoe]

I’m pleased you are enjoying the videos 😊 Thank you for watching

[@markmim5676]

Excellent job and step by step explanation Greg 👏👏👍

[@GregVirgoe]

Thank you for watching 😃

[@ianfurqueron5850]

Back-angling the ply to fit the curved wheel arches - great idea!

[@GregVirgoe]

Thank you 🙏🏼 it just allows some space for any irregularity where the wheel arch joins the floor. Simple but effective 😊

[@user-go9hb4td8j]

A pleasure to watch and to listen to your explanations. Your simple jigs offer solutions to "struggle points". Excellent videoing and editing, well done both. Thank you. 👍👌📹

[@GregVirgoe]

It’s a pleasure to read such a lovely comment. Thank you for taking the time to leave great feedback 👍🏼😃

[@philipdunn8376]

Loving the ducato video build Greg, nice to see a real craftsmen who takes pride in what you do, I cant wait to start my build when I pick my van up on Friday, Thanks for the inspiration 😊

[@GregVirgoe]

Oh brilliant 🤩 I bet you are excited to get started on it 🤩 good luck 👍🏼

[@kevinbrennan-glass5200]

I watched your sprinter build, now this build, you are a great teacher Greg, thank you for all the great information you have given people like myself. Love your clear instructions and great camera work.

[@toronado455]

I discovered those combo countersink and drill bits a long time ago and I couldn't agree more that they are very useful!

[@GregVirgoe]

Yes whether you need a simple counter sink or a deeper hole for a wood plug they are brilliant 👍🏼😃

[@boontjes5528]

Learning so much from this series! 👍🏻

[@GregVirgoe]

That’s great 😃 I’m glad you are enjoying it 👍🏼

[@TOMCOOZE25]

Greg, this video, with the pencil in the hole trick, absolutely saved me with my transit connect today. Thank you so much for your amazing content Tom

[@mikehumphs1124]

Cant wait for episode 12

[@GregVirgoe]

Will be coming soon 👍🏼😃

[@stephenauty2402]

Beautiful job Greg

[@GregVirgoe]

Thank you Stephen 😊

[@doctorpc4x4]

nice expanation of saw bades and how to use a jigsaw. The two saws that frigthen my wife are Chainsaw and Skil (Circular) saw so she will use a hand saw to cut full sheets. I have a couple of 6 inch metal profile gauges that I have owned for years that I use for corner/curve profiles. Well worth the cost in my mind

[@GregVirgoe]

Yes chainsaws do need a lot of respect as things could easily go very badly with them 🫢

[@chriserskine585]

Brilliant stuff, your electric vids have been most helpful for my build, doing all the jobs myself so thanks again atb, Chris

[@FirdayNightMatt]

You’re a capable man Greg. I’m looking forward to future videos.

[@GregVirgoe]

Thank you Matt 🙏🏼 hope you enjoy the rest of the series. 😊

[@robenhenni8463]

fantastic image, thanks also to Mrs. Greg🤗 , a tip,💡 first do a run with the circular saw with a depth of 1 millimeter and you won't have a chipout, I'm already looking forward to the next video

[@GregVirgoe]

That’s a good tip 👍🏼 I have seen that done a lot on the mitre saw 😃

[@johnridge6527]

Exerlent viewing you explain everything perfectly

[@wc3101]

i gave up on the idea of vanlife when covid became a thing, but now my desire to do it has rekindled. Im so happy that you are doing a new build as its going to be the van im looking to buy also. just watched all the playlist back to back and look forward to seeing the rest Greg!

[@GregVirgoe]

Will be starting again this week now we are back on it 😃

[@wc3101]

@@GregVirgoe hopefully you get to read this but im hearing plenty good things on cork insulation and would love to get your opinion on it, the pros and cons as well as price per metre etc. hopefully not too late to ask

[@gnarlybadger690]

Like a glove Greg, another cracking how to in the series. Thanks for taking the time and effort to bring us these great follow videos 👏🏻👏🏻

[@GregVirgoe]

I was just saying to slow that I hope someone comments about me saying that. You’ve made my day 😂👍🏼🤩

[@gnarlybadger690]

@@GregVirgoe 🤣🤣🤣

[@Rockythevw]

Love the VW tshirt

[@GregVirgoe]

Ah thanks, think it was from Sainsbury’s they sometime have some good official branded clothes in there 😎😃👍🏼

[@Rockythevw]

@@GregVirgoe Next time I'm in the UK, I'll be looking for it. Keep up the great work and videos!

[@GregVirgoe]

@@Rockythevw whereabouts are you watching from? 😃

[@Rockythevw]

@@GregVirgoe Calgary, Ab

[@toyesteve]

Thanks Greg, as you said, sometimes self-builders skip quickly through this bit. I'm looking at finally getting a build sorted once I find the right van, thinking a Boxer. Enjoying this series, and will be referencing it. Cheers

[@GregVirgoe]

Thank you for watching 👍🏼😊

[@jonathandilk5722]

Brilliant at last I know How to scribe a sheet of timber love the journey so far. Well done sir

[@GregVirgoe]

Are you new to our channel? Just picked up this build series. Be interesting to know 😊

[@johnmead1337]

Perfect job again. Excellent advise - like a proper trainer Greg - your advice works for all sort of other projects as well. Nice to see the boss helping you as well 😊

[@GregVirgoe]

The boss is always there behind the camera. Lou films almost all of these shots. She has steady hands 😊👍🏼😃

[@johnmead1337]

Actually that makes sense really when I think about it - the unsung hero of the channel you could say. Her camera work is excellent - my boss is also a Louise.

[@GregVirgoe]

@@johnmead1337 ah, my Lou is not Louise, in fact she’s get very angry if anyone calls her Louise 🤣

[@rogierbanis]

It is a joy to watch. Thank you for the details and not to forget also always your detailed subscriptions with links to products etcetera. Greetings from the Netherlands

[@richardtyler3074]

Finding these tips really helpful for our Sprinter conversion

[@GregVirgoe]

Awesome 😎 we do have a full series on our sprinter build too on the Chanel there is another playlist

[@GEOFF8406]

Another great video Greg. Keep them coming. It was great to say Hello and thanks over the weekend.

[@GregVirgoe]

Nice to meet you too. New videos out this week 👍🏼😃

[@thehomme]

That scribe technique is such a clever easy technique. I’d always wondered how people managed to do it

[@GregVirgoe]

Yes simple but very effective 👍🏼😊

[@Markos5511]

Hi Greg when do you think you’ll upload the electrical build. Eagerly awaiting this one as I’m sure unsure what to do. Some of the electrical builds are so expensive as they are all based on Victron which are amazing but so expensive. 😁

[@GregVirgoe]

That will be coming soon sorry we have been away.