8 BEST Boat Accessories in 8 Minutes | DORA PROJECT 🧜‍♀️

My 8 favourite fishing boat acccessories under $150 explained in 8 minutes!
🔔 Subscribe 🔔 to our KZbin Channel: tv.grift.co/subscribe
The DORA Project follows the build process of converting a very bare Quintrex 385 Explorer, into a very well equipped fishing boat, dedicated to light tackle fishing.
⌚TIMESTAMPS⌚
0:00 - Introduction
0:33 - 1. BoatBuckle
1:47 - 2. Cup Holders
2:21 - 3. Marinco Plug
3:19 - 4. BerleyPro Visor
4:13 - 5. CMAP Genesis
5:35 - 6. RodBuckle
6:24 - 7. BerleyPro Sidebro
6:59 - 8. STEDI Flood Light
8:08 - Outro
📷 Instagram: / grift.co
👍Facebook: / grift.co
🎥KZbin: / griftco
#boatbuild #builtnotbought #tinnymods

[@ForeverWild]

Loved the video and info buddy High quality stuff and I will definitely be using some of these upgrades on my boat and channel.. cheers!

[@deanwatt]

Amazing as always! Whatever you do, don't stop making videos!!

[@WayneTheBoatGuy]

That Boat Buckle is really sweet and I've not seen that before - cheers from the land in boating season right now!

[@PaulMalovFishing]

Great episode legend. 💪🏻 definitely picked up a few things there we should do to our tinny!

[@Nunyabitnez]

Awesome video with excellent tips! Thanks!

[@razorbak6783]

I'm going to do the boat strap, that's cool and convenient. You can never have too many beer holders, just make sure you get the big ones that accommodate a beer inside a koozie.

[@Dan-wi3mq]

Ayyyye welcome back. Need good content right about now

[@nathanturner2482]

Good to see another vid. Always good production, something I'm trying to work on... 🤯🔫😂😂

[@joshuabates4386]

🔥🔥 thank you, I'll take the buckles and caddys

[@fishhunt9874]

Nice little list of trinkets. You can double up on one mod and buy the combination cup holder/rod holders. When you’re fishing and you get bit the rod comes out of the holder and your drink goes in!

[@GriftCo]

I saw these the other day! Nearly picked one up but decided to go with the standard rod holder (net holder in my case) because I thought the combo cup/rod holder was a little too deep and big

[@IDontTalkToCops]

Very helpful ty

[@samlynch6896]

Great vid mate

[@ByronTeaHill]

Great video!

[@MarcinKantor]

Excellent video

[@projecthiluxpigrig2.095]

Good work brother

[@allenbmooresharinginformation]

Love to see your install for the light. Wondering if it can handle 12 to 36 volt as well.

[@chriswf]

What would you use to power a 24 or 36v light with? Just some lipos or power drill batteries?

[@ahmadblogamatir564]

Mantap bro 👍👍

[@toddkelly8014]

Hi mate - loved your whole Dora series and have started a few upgrades on my own explorer, including a casting deck. Thanks for the introduction to Rivnuts too - did you use the aluminium ones of the zinc coated steel?

[@GriftCo]

Aluminium for sure! That or stainless, no way would I put anything else in the boat

[@dbayboyds409]

Great vid mate! Did you do the tig work yourself?

[@GriftCo]

95%

[@thebowtiefisherman5718]

I'm a new subscriber to your channel. Thank you for all of the great content. Hey.... What kind of boat is that you have? I really like it.

[@GriftCo]

Hey Bow Tie Fisherman! Thanks for the kind words - It's a Quintrex 380 Explorer!

[@craigweir8875]

Great video very helpful you are a great presenter. Just wondering what lights/led you are using for the under gunwhale lighting inside the boat? Did you do a video on that install?

[@GriftCo]

Thanks Craig! Unfortunately I didn't do a video, one of my first little projects I undertook when getting the boat. I touch on it very briefly when I introduce the boat; kzbin.info/www/bejne/l6PPpIafoMyFgNEsi=RzhBKerd1Q5wcf9D&t=473

[@GriftCo]

For the lights, I was just using some camping lights I had on hand where the LED strips are embedded in resin and on an ally strip. I think I pulled the lights from this kit I had: www.coastal4x4.net.au/products/our-products/products/vehicle-lighting/rhino-led-light-kit/

[@reeceharradine7638]

OFTT the FOZ

[@jennyd2046]

Stedi make killer lights.

[@hobieanstey]

Great video mate. Where did you purchase the boat buckles from? Cheapest I can find is $230 without any add ons…

[@GriftCo]

So, I've gone back to have a look at where I purchased it, and where I got the $148 - In May 2020, I bought two single BoatBuckles for $108 each from Amazon, so $217 for the pair after tax. I must've looked up the existing price for a single buckle when I released the video, showing $148. And now for a pair, they're about the $230 you're seeing. My apologies for the confusion! I obviously got a little confused myself when making the video.

[@trevturk5003]

Awesome video but where did you get those boat buckles from?

[@GriftCo]

Off Amazon mate - price might’ve changed since released

[@trevturk5003]

@@GriftCo thank you mate much appreciated

[@cjdominikovic6572]

Grays point

[@keeledover4218]

i like your video but the only one i can use is the cup ;). why cause it’s a hydroplane not a fisher hah 👌 bobs your uncle see you down under

[@chriswf]

Did you restore that whole boat? Or did you buy it like that? Just now seeing your channel for the first time.

[@GriftCo]

Hey mate - not sure that "restore" is quite the right word, but modified and enhanced is probably closer. You can take a look at most of the process in this playlist if you were interested; kzbin.info/aero/PLQZL45l72E79BeP1eTBrgxQ-RV8w0bi0b

[@ZachFrenchdaman]

Hey bud you probably say in one one your videos but I’ll just ask here what kind of boat is being shown I think it looks really cool and would like to know where or how to get it😅?

[@GriftCo]

kzbin.info/www/bejne/l6PPpIafoMyFgNEsi=JzfoBX-RgGbYdJb-

[@ZachFrenchdaman]

@@GriftCo 🙏

[@guyh.4553]

8 minutes huh? How come the marker says 9:08??? 🤣🤣🤣 Good ideas, even for us fresh water Yanks! 👍👍👍

[@GriftCo]

I wondered if anyone would make a point of that! I like to take the liberty that I start listing the mods at 0:33 and finish at 8:09. Call it 7 minutes 36 Seconds.. Thanks for dropping by, hopefully you found something useful for yourself!

[@henryparker4036]

if u wan to see the composition of the land in cmap need to pay $24 a month

[@NBM397]

Blue is certainly not cutting glare - the exact opposite: Blue light is the absolutely worst for glare.

[@GriftCo]

I’ll let you take that up with Stedi; www.stedi.com.au/marine-c-4-led-spot-light.html

[@spidermon5028]

What kind of boat is this?

[@GriftCo]

kzbin.info/www/bejne/l6PPpIafoMyFgNE

[@sidon1979]

bending the law? what law?

[@GriftCo]

www.aulro.com/afvb/general-chat/258398-light-bars-boats-illegal.html

[@slydawwg]

Your drilling an awful lot of holes in your boat for some of these additions, especially" the big hole cup holders". I would not recommend doing that.. Anyway, Cheers

[@GriftCo]

Nahhh, it’s fine. The structure of the boat is still whole and unaffected. I had actually patched more holes in the gunwale from rod holders put in by the original owners.

[@darthjar9117]

Yes because everyone knows how to weld

[@GriftCo]

If you used your imagination just a little bit, you might be able to think of a way to use a Boat Buckle without welding, like 90% of use cases! Good luck!