Grinch Who Stole Christmas Light Up Tumbler

[@vickyewilliams5764]

Beautiful! I drilled a tiny hole inside to outside the tumbler. Fed the lights through & then placed them. Fill drill hole with uv resin When done epoxy

[@brendab4761]

Your Mr. Grinch tumbler is so beautiful! What a great idea! Great job! I love it! ❤️

[@sherylmorgan3678]

I would use a hot fix tool to melt the plastic when making the wire hole.

[@MileyonDisney]

I've seen several light up tumblers, and this is by far the cutest. Great job! (as always)

[@wandagassaway5054]

This tumbler is so beautiful Thank you for sharing God bless and Merry Christmas to you to.

[@gourdhead22]

I just adore this tumbler. Love Jim Carrey Grinch. Thank you for this inspirational video. Hugs Sheryl 💙🎨💙

[@shelleybezona1691]

Wowza!!!

[@43Jeannie]

the best way to hide the lights is to attach the lights, apply a couple coats of epoxy then spray paint and glitter, It totally hides the wires and makes a smooth cup,

[@tammychurches9682]

He turned out perfect

[@SuperBrowndog1]

I want to try this. Thanks 😊

[@catinarenae]

Amazing!! ❤❤❤

[@katieprice4201]

I love how you did this .. and adding the black for the wires just made it complete. Merry Christmas

[@customTumblers]

Great Job, and love the Grinch

[@marilyngraham9399]

Wow! That is absolutely beautiful. I love it.

[@amyaustin513]

You’re so missed. I had to rewatch your videos. I pray you’re alright. Wish you’d come back!

[@tippetsm]

WOW!!! Thank you so much for showing us how to make this!!! It is brilliant!

[@lorib9219]

AMAZING!!!

[@debbiejohnson5502]

I have made several light up tumblers and always drilled through the sidewall of the tumblers. No matter how much I sealed the hole I could never make the tumblers keep ice. This is brilliant and can’t wait to use this technique. Love this tumbler and you did a beautiful job. Merry Christmas!!

[@MileyonDisney]

There is a vacuum between the two layers of steel. The hole lets air in, which conducts heat. Sealing the hole doesn't replace the vacuum.

[@joannyoung8396]

Beautiful love it, you did a great job.

[@KellieDTravis]

This is one of the best that I have seen!! I absolutely love it!

[@rosavasquez7406]

Wow!! This tumbler is beautiful!!

[@aleshamahan8949]

I absolutely love your tumbler, and watching your video. You explained everything better than I have seen in alot of video and I have been watching for over a year now on different people. You did amazing. Thank you for sharing!❤

[@crystaluv3313]

Thank you so much! That really means a lot❤

[@qutekreationsstudiollc.507]

Beautiful

[@loriseaman9381]

Really cute!!!

[@kelmania34]

So cute!! The lights really added to it.

[@PageCreations]

It came out really cute. :)

[@Marys.creations31]

This is so cool! Thank you❤️🎄

[@debrajol3585]

That’s amazing 🤩 who doesn’t love the Grinch!! Nice spin on ‘stealing’ Christmas 😂😂. Keep it up girl.. your content is perfection 🙌💯💯 And a big Merry Christmas to you and yours as well 🤗

[@phyllisgast8357]

This is absolutely by far the best explained and Stunning light up Christmas 🎄 tumbler I have ever seen here on KZbin! FANTASTIC JOB Merry Christmas to you and your family 🎅🤶🎄 & enjoy your the magic of Christmas with your grandkids, they make it come alive again 💜

[@crystaluv3313]

Thank you so much! And merry Christmas to you and yours🎄

[@traceycrawford9938]

This one is sooooo cute!! Love it!!

[@lindabrady370]

I absolutely love this!!🎄🎅❤

[@enriquezepeda6019]

Amazing 😻

[@robinlosee3411]

Love it! Very creative!

[@MrsRONDA10]

Love it! Best one yet🥰

[@crystaluv3313]

Thanks!

[@Oonagh72]

I forgot to say I think the cup is so pretty. It almost makes me the like the Jim Carrey Grinch 🥰

[@gloriadavis7956]

This the cutest cup I have ever seen. Do you sell them?

[@crystaluv3313]

Thank you! Yes this one is for sale

[@gloriadavis7956]

@@crystaluv3313 how much is it

[@crystaluv3313]

@@gloriadavis7956 $55

[@slytherinbuttafly3088]

WHAAAAA! This is awesome! I love it so much! How do u wash it though?

[@crystaluv3313]

Thanks! You just can't submerge it all the way

[@carolc9523]

Beautiful tumbler! Nicely done 😍😍😍. I love the way you explain, very calm and very informative. I was wondering, is the tumbler bumpy after all the layers of epoxy because of the lights? Thank you!

[@crystaluv3313]

Thanks! I epoxied until the tumbler was nice and smooth

[@carolc9523]

@@crystaluv3313 Thank you so much for replying and for being an inspiration 😊

[@michelleduran6241]

So cute! Can you share what you used to hold the lid on the turner.

[@crystaluv3313]

Thank you. Actually I just taped it to the end of a pool noodle end. Nothing fancy!

[@markkirsch8200]

Where did you say you got the lights to print on printable vinyl?

[@karibeetch1311]

Just drill a hole in the side of the cup where the lid fits then then you won’t have to worry about your wire

[@crystaluv3313]

I didn't want to break the seal. Thanks😁

[@karibeetch1311]

@@crystaluv3313 it won’t break the seal if you are below the bottom

[@BiggJuicy]

Omg love this. Where can we purchase this

[@crystaluv3313]

I still have thos one, its available! If you're interested its $55

[@denisecasey4003]

I really love this, I am having so many issues with the bottom, I've drilled it and it still doesn't pop on and off, any suggestions?

[@crystaluv3313]

It took me a few times to drill it down enough, a little at a time. Go slow, you can drill off too much.

[@SEDial]

Is is very cute and I love the domed lid. How did you attach it to your cup turner to epoxy?

[@crystaluv3313]

I taped it to the end of a pool noodle, works like a charm!

[@SEDial]

@@crystaluv3313 thank you!

[@hopeaudi171]

Are you putting the uv resin on top of the little light bulbs or under them?

[@crystaluv3313]

I actually apply uv resin to the wire near the bulb

[@barbduggins9917]

Gorgeous. How did you get the lid to attach to turner?

[@crystaluv3313]

I taped it to the end of a pool noodle!

[@cathihatlestad7659]

Please send me the link for the Christmas tree & lights svg or waterslide. I can't seem to find them . Thank you

[@mommalove3.057]

Do you have a link for that transparent printable vinyl but for inkjet? Whenever I look it gives me transfer paper and I don't think that is what I want

[@crystaluv3313]

I used waterslide for this. I do have the link in the description box below the video, its called Hiipoo waterslide paper. I hope this helps

[@mommalove3.057]

@Emersyn Aurora Design no no for the vinyl you said you used vinyl.for the lighbulbs. You linked on but it's for laser printer I believe

[@crystaluv3313]

@@mommalove3.057 yes! SORRY! I fixed the link, here I the inkjet paper I used amzn.to/3zOrPle

[@tammysmith6009]

I looked on aliexpress but there so many I couldn’t find that glitter. I also don’t like the holographic whites. Is there any more info you can give me so I can find that chunky white glitter? Thanks!!!

[@elizabethjanquart5200]

Check our glitter chimp

[@geauxglamdesigns6959]

How do you screw the bottom back on the cup without ruining the lights?

[@crystaluv3313]

I use my dremel tool to ground down the threads on the plastic bottom so it just pops on instead of screwing back on

[@nancyjette7]

Which lights did you use? The ones I see look Like they have a larger battery pack

[@crystaluv3313]

I'm sorry, I forgot to add the link....here it is amzn.to/30Djkwv

[@Oonagh72]

I think the wires “sticking up” isn’t a big deal in my opinion. With this design since he is stealing the lights, the haphazard nature fits.

[@gloriadavis7956]

Grinch tumbler light up

[@luannsettles2623]

Where did you find the bulb images

[@crystaluv3313]

I just googles Christmas light bulb clip art and printed them on clear sticker paper

[@gloriadavis7956]

Do you sell those tumblers

[@gloriadavis7956]

How much is the Grice tumbler

[@heatherfoster2613]

How do you wash it?

[@crystaluv3313]

It has to be hand washed, being careful not to get the battery pack wet of course

[@CROBUTKA]

Can you provide a link to where you got the grinch picture from?

[@crystaluv3313]

I dont have a link, I just searched on Google and chose my favorite image🙂

[@rhodalee7503]

Get super glue

[@RebsDesignBoutique]

Beautiful