100HP 6' Jet Boat is Finished!

[@fooman2108]

The six year old, I baby-sit on weekends, is now screaming about wanting a pink boat like this! What every six year old (who get frightened when she ride her OWN bicycle too fast) needs!

[@rthomp03]

I was a bit skeptical at the start, not sure about covering up that beautiful aluminum body. But that came out better than I could have hoped. Each build is better than the last, I'm super hyped for this giant secret project.

[@neonnerd1364]

At least it's just a wrap so if they miss the bare aluminum they can peel it off real quick or change the color.

[@badger_claws]

Same. You saved me typing this 👍🏻

[@graemecarter4275]

Aluminium

[@darthgbc363]

Pretty cool. I hope the wrap doesn't prematurely peel off, being he started at the front & worked his way to the back. Exactly opposite how I think it should be layered. That's like descaling a fish & expecting it to glide smooth.

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@MyMarkn]

That's awesome! Now all you need is a matching trailer so you can tow it with the barbie camper.

[@johnrisoli2105]

Best finish of any project you guys have done. Everything works nothing else still needs to be done. Make that a giveaway prize!!!!

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️☝️and claim 👉🎁🎁👈

[@nasmitty5261]

My last project, I used a 13/18 variable pitch Solaris prop, they are nice units. Extended ride plate is gonna be a necessity, Run it out as close to the pump as you can get. I used pump wedges that stacked but you can also shim the ride plate on the rear as well.

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️🔝🔝☝️and claim 👉🎁🎁👈

[@ebikeliverystable]

Just got through watching the "where's my nads" video/commercial on Facebook and all I could think of while doing so is "that's the Grind Hard Plumbing Crew. LMFAO

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈

[@chris117ize]

No way! I was just in Sandpoint for airplane training about a month ago. The boat ramp at the beginning looked familiar, then I realized I fished it. I've been watching the build and didn't read the description until today.

[@youareright5431]

It's amazing when you put those nice props in how tight the tolerance is between the impellers and the stator,, some actually sound like a knife just touching the tube until it breaks in👍👍

[@that1guy302]

Loving the Barbie theme on a lot of the projects😂

[@GrindHardPlumbingCo]

It is the move!

[@MrThunderCunt]

@@GrindHardPlumbingCo are you guys ever going ti being back the barbie mustang?

[@just-a-waffle]

I think you're supposed to remove the metal reed stop with the Boyesen reeds, should verify in the instructions

[@silverbackanimal7215]

You should take the restrictions of the reed valves , makes a big difference by letting more air in , not many people do this and they say you aren’t supposed to but I’ve raced 2 strokes all my years

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝🔝and claim 👉🎁🎁👈

[@speedboat1741]

My smallest boat build was 11' 6" X 6' . 20 degrees deadrise. 25 kts with 25 hp outboard in open ocean. Love your micro jet boat. If you build another, try to get a sharper knuckle at the stem. I think it would porpoise less.

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝🔝and claim 👉🎁🎁👈

[@Root_T]

Pink isn't on my all-time list of colours but it works. I would love to see some kind of black, white, silver, chrome, or anything kinda matt or dull with a pink accent. The pink being in some kind of super shinny style of paint. Either way sick boat and sick video. Looking forward to see what else you guys come up with

[@zhazhoone3251]

For your weight and balance try pointing jet nozzle a few degres down. It should help with that jumpy bow. Awesome build!

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️🔝and claim 👉🎁🎁

[@victorgustafsson2328]

Oh this thing looks better than I could ever have imagined!

[@GrindHardPlumbingCo]

FOR REAL!

[@calholli]

@@GrindHardPlumbingCo Think of your propeller like a GEAR... As you change the angle of the fins, you are either making the prop more high geared or more low geared-- Just like a sprocket on a motorcycle. If they are saying that the prop is more "performance at acceleration" -- they just mean that it's geared lower, so it will also have a lower top speed. Just something to realize

[@hahavines6068]

Now for a mini trailer to pull it behind the dream camper.

[@timjackson8193]

So awesome to see it finally finished!! This is your most refined build yet!

[@danielcarroll5667]

I am totally overwhelmed .............a work of ART if ever I've seen one , I would have said "DON'T DO IT ! DON'T MAKE IT SO PERFECT !" ahhhhh.....what the hell , it won't stay that way for long , that thang is just soooo cool !

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session

[@alexcrouse]

I liked the Wrap better before the covered the rear angled part. Looked so cool with the aluminum peeking out!

[@Z-Ack]

Yea there’s two types of guys in this world.. guys who like what other men like and guys who like men.. not a clue why they’d do that to the boat unless they really do grind hard on plumbing.. dunno why .. I mean the Barbie keep was funny I thought but they seriously wanted to do the bar by keep for personal reasons. Not to mention I’ve never seen any wife or lady friends.. so starting to put one and one together now.. i mean not a big deal but beating around the bush on letting it be known.. or beating around the tree.. or something.. lol

[@alexcrouse]

@@Z-Ack most KZbinrs keep their family out of the limelight to protect them from crazies. Doesn't mean they are gay.

[@AL4N.]

@@Z-Ack guess you haven't seen very many of their videos. Edwins girl has been in several videos.

[@Razorbackjeep]

Love it when people’s opinions don’t hold weight. Thanks @Z Ack for the laugh!!!!

[@Razorbackjeep]

@@Z-Ack lol your really showing how slow you are…

[@manks5491]

Looks absolutely gorgeous. Can't wait to see you guys rip it around!

[@davidjessee7701]

OMG!!! This has to be the best micro JetStream that’s ever built!!! I would love to see the reaction of the guys at JetStream!!!!!!!!! Absolutely beautiful!

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️🔝🔝☝️and claim 👉🎁🎁👈

[@calebmillican6185]

Every video on this project makes me smile big. Well done guys. Keep it up!

[@jondavidmcnabb]

Wow that has to be the best wrap job I have ever seen!!!

[@chadelsner9642]

Absolutely love the way the boat turned out. Keep up the great work .thank you.

[@dustinenglutt2748]

I truly believe everything you guys do turns out absolutely amazing. Keep up the awesome content and we are all looking forward to the next big project

[@Blaquer17]

Man, it came out incredible. This is now my favorite build of you guys'.

[@Jeeg_Quebec_CAN]

WOAH!! Awesome work Ethan, the crew and everyone involved!! Heck yes!!

[@hashibira5541]

I enjoyed the whole boat thing you should do something like that

[@lukelofgren4108]

Its going to be a whole new monster with the reeds and especially the impeller! It needs to be properly rallied on a river with some shallow spots and rapids!

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session..

[@awesimo2000]

The Barbie font and hearts is the chef’s kiss for this project

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️☝️and claim 👉🎁🎁👈

[@dklgdveje]

The aluminum color was sick, the pink is just ok but overall this is a beast that look like a kid toy and i can dig that

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session..

[@RandysRides]

It looks like it's store bought now. lol. "Sure...you built it from scratch. Sure you did." hahaha !! Turned out friggin awesome.

[@johnotakum]

Not sure if you'll ever see this, but I was reading about something that could potentially force even more power and efficiency into this little jet boat. A Toroidal Propeller.

[@zshan1895]

Been with you guys since day 1. Build a rigid chopper with a banshee or rd350/500 engine pretty please 🙏🏼

[@markpeterson8978]

Fricken Rad! I have been awaiting this like christmas morning! Awesome work Fellas \m/,

[@JB-ro3sz]

on high-speed jet boats they have a plate just in front of the water intake that is shaped a bit like an upside-down backward wing, my understanding is it causes the water going over it to curve upward and into the intake to reduce cavitation at high speed.

[@ODeUrban]

Gring Hard has conquered land and sea! Please make a mini heli😅

[@dudesikk1168]

you absolutely killed this build! the wrap made it even better!

[@lilmancc35]

Today is the day! The day that will be forever memorialized as "THE DAY SOMEONE FINALLY FINISHED THEIR PROJECT." Congrats on being the first person to ever finish a project,because as we all know, no project is ever really complete.

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@chrisstrickland3310]

Wow this thing turned out great. It needs a trailer so you can pull it behind the barbie camper!

[@apexaero]

KZbin needs to have a Two Thumbs Up button!

[@tinygaragepowersports0122]

Amazing job...."Ultra PREMIUM!"

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@Moonscrafting]

Now we need colab video with Cleetus McFarland

[@Jordyn_Smith_389]

You should make a boat trailer and hook it up to the barby camper

[@jhilditch12]

Can't wait to see the "BIG UNVAIL" that you have coming up soon..Great job GHP.

[@ECL..]

Hope your big project reveal is a manufacturing plant, so you can make and sell all your awesome creations

[@StingrayOfficial]

YAY!

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session..

[@samlabossiere5093]

Boat looks amazing!!! Pumped to see what your top secret project is

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session..

[@madmesmith5187]

Itching for your next video guys, i want my next fix of Grind Hard madness 💕

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈

[@nickbowker5134]

I was not sure about the pink at first but man that's one well polished machine 👌👍

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@mindthreatx]

I want one just like it but with some 80s deco art lines on the side and pink neon illumination on the inside! Would be so incredible!

[@BurtButtedinski]

Coat the whole boat with Rain X. If it works on windshields, it will make the boat slippery through the water.

[@abeljimenez8168]

You should put some type of mesh or chicken wire on the bottom of it so rocks and things don’t run through your propellers

[@SnowStick247]

So when are you building the matching trailer so it.can be pulled by the barbie camper?...

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️☝️☝️and claim 👉🎁🎁👈

[@GrimmReapa]

Now it’s time for interior led lights, awesome job.

[@gavindavis8520]

I’ve been waiting for this video and am pumped that it finally came out! Keep up the great work guys!

[@GrindHardPlumbingCo]

Hope you enjoyed it!

[@gavindavis8520]

@@GrindHardPlumbingCo I sure did

[@calholli]

@@GrindHardPlumbingCo Think of your propeller like a GEAR... As you change the angle of the fins, you are either making the prop more high geared or more low geared-- Just like a sprocket on a motorcycle. If they are saying that the prop is more "performance at acceleration" -- they just mean that it's geared lower, so it will also have a lower top speed. Just something to realize

[@difficultkunt4050]

Lol.. comedy Gold

[@Razorbackjeep]

@@calholli what your changing is the leading and trailing edges of the impeller. We were doing this with a hitch homemade impeller holder and using a torch with a wrench to do this at the marina. Hey we didn’t have any shop close when testing. Here’s a video to get the idea kzbin.info/www/bejne/hn-nZn-EirqhjMk kzbin.info/www/bejne/aGXPepahhbt2bLc

[@jamesmcgee9279]

By far the best-looking project you ever made.

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️🔝🔝and claim 👉🎁🎁

[@benpeter4959]

you guys need to get together with cleetus McFarland and do a jet boat episode lol

[@DarthVader-yd9id]

I waiting for the friggin bi-plane 😍

[@nitrous07me]

That guy did a hell of a job wrapping this boat

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️🔝🔝☝️and claim 👉🎁🎁👈

[@RogerDavid647]

I want to say thanks to y’all for this series, I found y’all a while back from the first video and whenever one came on It was a highlight of the evening, normally watch on my fire tv but I had to come on my phone account and sun just to say this 😂

[@Archiesarchie]

Gotta try this boat going up a mini white water creek jumping mini logs

[@dukie1616]

Can you believe that! That’s some straight showroom crème de la crème. Just when I thought that build couldn’t get any better than it already is.

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@FishOn101188]

Pink trailer for it and pulled by the Barbie jeep 😂 that would be crazy to see!! amazing work very talented I enjoy the vids keep them coming

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️☝️and claim 👉🎁🎁👈

[@Economan66]

You should make a trailer for it and have Sendy unload it at the dock.

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session...

[@rasmustalas122]

Behind Barbie jeep on trailer would be cool

[@TheLfamily24]

@@rasmustalas122this aged well

[@geoffburrill9850]

Super job. Would never thought of wrapping a boat, but guess it's quicker than spraying?

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️🔝🔝☝️and claim 👉🎁🎁👈

[@ifger]

CW really flexed some skill on that, even the welds look like they have been perfectly stretched!

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@haukesattler446]

I would to see a reaction video where you take out this boat onto a public beach/harbor and film the people's reaction.

[@Villain_airsoft]

You guys should make a trailer for the boat so it can be pulled by the Barbie jeep😂

[@Bannanasammich]

imo you should put the lights right at the bottom of the windshield, maybe on the horizontal part. yould be tall enough to easily look over them, with out them being right in front of your face. awesome build man.

[@jaykenward]

omg thats amazing well done guys epic build

[@mrmohawkmansir]

NICE! Can't wait to see it in action 🤘

[@angelsalyers1284]

The surprising thing with lights on water especially large open bodies of water you cannot see anything despite having the brightest lights it's something you have to see in person it's actually makes it where you can't see far in front of you at all

[@jacdime12]

Dope little boat !!!

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈

[@calysagora3615]

You absolutely HAVE TO glue a rubber ducky to the front, like hood ornament. Perhaps one of those black ones with horns and a Trident! (Paint horns pink!)

[@anthonyestevez118]

This IS one of the coolest builds!

[@BillRolke]

Y'all need a little trailer for it so you can pull it around behind the Barbie camper.

[@jacobbresnahan5930]

i think they should make there version of the baja 1000 with the “power wheels “

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈

[@redhammer6601]

imagine how nice that would look if you anodized the whole thing. if thats even possible? always wondered why they dont anodize aluminum boats?

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈

[@2H80vids]

In some of the footage, the wrap looks to be CocaCola red. It's only in certain lighting conditions that the pink really pops. It'll be interesting to see it outside. They did a lovely job on the wrap and the decals though, whatever colour it looks.👍😁 Have to agree, it's the best-looking build you've done so far.👌

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk🔝 ☝️☝️and claim 👉🎁🎁👈

[@N1RKW]

Simply beautiful, guys. Simply beautiful.

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@justinjohnson2125]

I love it! ...But the Colonel will forever be my favorite. 😍🤩😍🤩

[@brianhunt8754]

Ok, when do they go into production. If the numbers are right I can move a dozen right now.

[@beeme8397]

Congrats guys. Proof that you can have a Barbie dream boat at any age.

[@shawnhayworth9254]

You should make a "Boaty slim" trailer for the Barby jeep you pull 😂

[@BlindGuyRc]

The boat is awesome. Love the theme.

[@Blaquer17]

Just a suggestion, but you guys seem like you'd be able to build something like those Lazaerth Wuzuma quads- A 4-wheeler with a big engine that you sit on and not much else. Seems like it would be up your alley and a cool street machine build!

[@calholli]

Think of your propeller like a GEAR... As you change the angle of the fins, you are either making the prop more high geared or more low geared-- Just like a sprocket on a motorcycle. If they are saying that the prop is more "performance at acceleration" -- they just mean that it's geared lower, so it will also have a lower top speed. Just something to realize

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session..

[@frederickmcknight2123]

Boat came out awesome

[@cb175s]

That Little jet boat is so rad I love you guys... 👍👍 Thank you for making it. ❤️❤️

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk ☝️☝️and claim 👉🎁🎁👈

[@007teal]

This looks awesome and been loving the progress! Would be awesome to see it live in action! Here in Spokane Washington

[@Ameritude]

Same!!

[@benrichards9667]

Drive to Sand Point it's where these sea suckers live.

[@hassirsims4756]

I've watched since Cinderella you guys inspire me to send it harder everyday.i doubt you guys will see this but you guys should do a 2 seat turbo crosskart/off-road go kart. Build everyone's done the single seat it's time to maybe bring the family into the madness lol (hands and feet in the ride at all times ) 💯🔜love the content I will continue to be subscribed man

[@message-6305]

Thanks for being an active subscriber🤗❤️you have been selected for today's giveaway session.

[@derealdnuez7671]

Ye bruh datz da jam best mini mini jetstream I’ve seen so far

[@Ameritude]

I have only seen the thumbnail in the tiny notification I got and I can already say that I very very very much approve

[@GrindHardPlumbingCo]

So happy to hear it!

[@grimytech]

That's secret project has to be the new shop 🤙 Or the siding on Ethans house😂

[@CLCIII]

SWEEEET!!! So looking forward to seeing it on the water! As Always, May God Bless you and yours! 😇

[@Jdavid2890]

A trailer so it can be pulled by the Barbie Camper would be epic.

[@textme---6964]

feedback appreciated♥️👍 you are selected let's talk 🔝🔝and claim 👉🎁🎁

[@austinnorton9634]

Curious what part of North Idaho y'all are in? You mentioned the wrap shop was in post falls. I'm just west of there in Spokane Washington.

[@jordanklein3975]

So when do we see it on a trailer behind the Barbie camper van?

[@textme---8830]

feedback appreciated♥️👍 you are selected let's talk 🔝☝️and claim 👉🎁🎁👈