GROHE | Rapido SmartBox | Installation Video

Discover how easy the GROHE Rapido SmartBox is to install.
With three outlets for a wider range of shower options, the GROHE Rapido SmartBox can take on the job where two rough-ins are normally needed. Which is a huge savings in work and effort.
The GROHE Rapido SmartBox makes adapters practically redundant. It has ½" connections, made to fit all standard pipes. Where other rough-ins with ¾" outlets are made to fit the exception not the rule, the GROHE Rapido SmartBox is designed to fit 90 % of all pipes. Smart, isn’t it?
About GROHE:
GROHE is the world’s leading brand of sanitary fittings and dedicated to provide innovative water products. We are committed to create exceptional experiences and to deliver “Pure Freude an Wasser”.

[@thomasmatthew7759]

This was way easier to understand than the printed directions in the box. My shower is done, I just came back for the music. ♫♫

[@bobjones8378]

Music guy is much better than their engineers

[@marekfluder4334]

Temporary big plug with 16 bars of pressure (1:45) will leak like crazy. Ours leaked with regular household pressure of about 6 bars soaking the ceiling below when left overnight. Grohe support stated that this plug supposed to be used only for flushing the lines and not left in for the installation of the walls/tiles. This video clearly shows using this temp plug for the wall installation. The temp plug also comes with only 2 screws. The actual cartridge with valves does not leak and that is what we used during the wall installation. Grohe: please correct your instructions and videos that mislead and might cause some serious damage!

[@richb1160]

Just a point of reference. The temporary big plug has been holding 60 PSI house water pressure for about 8 months. Yes. Major delay due to plumbers. After reading your post, I am very concerned about the plug leaking.

[@hexane8]

Huh, I think some steps involving pipes would be handy.

[@skytab100]

My handheld comes on when I turn dial left, however the handheld is situated to the right of the showerhead. How can I revers this so that the showerhead which is on the left side turns on when I turn the dial left instead of when i turn it to the right. Does this make sense? I think my plumber screwed it up.

[@romolov_7726]

Ho tolto la vasca da bagno e vorrei mettere un box doccia. Le pareti sono state fatte con forato da 8cm. Con intonaco forse arriviamo a 10cm di spessore. La domanda che faccio è se devo necessariamente fare un controtelaio in cartongesso per poter installare il corpo del miscelatore e il rainshower smartactive. Non credo che facendo delle. Semplici tracce sul forato, riesco a fissare i due corpi.

[@leonorjuan6800]

It’s cool to learned with your video! 💪💪💪

[@haiderfayad3357]

جزاك الله خيرا يا هندسة

[@JishoMathew]

Left side plug no problem

[@robertbulterman1677]

that music is an assault on my senses

[@Avalyniscool]

How do you install the wall union?

[@mohammedghouseplumber316]

Very nice work

[@AliensRec]

Dear, I have a problem and I need to know how to solve it please: No matter how I install the blue knob, when it comes to regulating the water to be able to mix the cold water with the hot water, it cannot do so. either it comes out very cold, or it comes out very hot. It is impossible to regulate it to a warm nice temperature. Could you tell me what the problem would be and, if applicable, the spare part that I should replace to buy it. Thank you

[@user-ky6rz1sj9t]

Ого крутые технологии 👌🏻

[@mikecrumpler1441]

I just had one of these installed. Now I can’t get my shower hot enough. Is there any way to turn it up hotter ?

[@sweaterwearingsquirrel9302]

Hot water tank

[@middlesbrough123]

Thermostat setting on showers may need setting

[@plumber823]

Good

[@AgreGAD9]

Что за тонкий ключ используется на 0:36? Не могу найти подобный

[@mthiyagarajan4398]

Super good thanks

[@deependrasaini727]

Nice

[@memir5854]

شرح اكتر من رائع👍👍👍

[@somaaelsapak6361]

great video thanks for that

[@mahinderkataria4663]

मैंने एक थर्मोस्टेट लगाया है जिसका प्रेस नहीं आ रहा क्या करूं

[@user-fi5uj6vy1p]

Классно 👍

[@johnl279]

Super helpful!

[@GroheAmerica]

Glad it was helpful! - GROHE Social Team

[@user-yi8dq8uz1t]

👍🏻👍🏻

[@sokolum]

missing information

[@afrozpathan1155]

SO nice👍👍👍👍👍 bast video💗💗💗💗

[@GroheAmerica]

Thank you! - GROHE Social Team

[@user-nw7eb6cs2t]

👍

[@diaszhangali8424]

круто👍🏻

[@user-zn5vx2vk5q]

👍👍👍👍

[@user-eu1wu9ph6y]

Вау

[@user-rf2vx4hi2p]

👍🏻👍🏻👍🏻👍🏻

[@ranausman1301]

im plamber you heva jobe

[@user-lj7do7tj8k]

سلام عليكم ممكن سعر هذا الخلاط

[@rontram]

Grohe's written directions suck!! These videos are somewhat helpful. But, still lacking!

[@user-gy5dn8vm7n]

Самое слабое место для воды это шов а вы устанавливаете бокс и людей учите.

[@bobjones8378]

Not impressed ....First off there is no standard installation with that printed rough in garbage on the housing ,you have to use your own brain to gauge where to cut the pos ...The only thing that is accurate are the jig caps used to cut the stems....I personally had no problem installing this because I'm used to using a tape and installing things based off of measurements, it's how we do it in the Elevator trade but this isn't for a basic DIY warrior...The tech manual is useless and poorly illustrated an their live tech support is less knowledgeable than I am with plumbing...I do have a great deal of plumbing knowledge but shouldn't know more about Grohe's product than the tech support monkeys ...You also can't really get the valve to go to completely cold and hot you have to compromise one of them a little ...The volume control is a freaking joke too...Looks great but Delta makes a better product...I'll never use Grohe again when I build another bathroom,their engineering is goofy .

[@kathyrastley2170]

Please help me! Tech assist is not helpful!!! If I adjust the controls from hot to cold, you cannot adjust it back to hot, just stays lukewarm. Already spent $$ for plumber to repair and it’s still not working properly 😬 Any help would be so appreciated 😊

[@bobjones8378]

@@kathyrastley2170 Sounds like you need to tell your so called plumber to refund your money ..Have you pressed the lockout button on the mixer knob to get it to go pass the alotted setting for hot ? There's a button the valve knob that will allow the knob to go past the hottest temp that the plumber mixed it for ..turn the knob all the way to hot until it stops then press the button on the knob and turn it all the way to the left to make it hotter while holding the button.If that doesn't work you plumber didn't set the temperature control to the proper setting.

[@Avalyniscool]

How do you install the wall union?

[@user-eu1wu9ph6y]

Вау