Рет қаралды 16,517
The Zareba® Copper Sectional Ground Rod Kit is a revolutionary option for electric fence ground rod installation. The kit includes 4 (four) 2-ft copper-coated ground rod sections that screw into each other and make it easier to drive the stake into the earth.
To assemble and drive this ground rod:
1) Screw the hardened steel tip and tighten.
2) Top the first section with the plastic anvil.
3) Drive this section into the ground, leaving about 5 inches exposed.
4) Remove the anvil and screw in the next section.
5) Drive the rod again, leaving 5 inches above ground.
6) Repeat for the remaining ground rod sections, leaving 5 inches for the hookups on the final section.
With the Zareba® Copper Sectional Ground Rod Kit, you’ll be able install your ground rods in minutes, creating the critical connection you need to keep your electric fence operating effectively.
Ground Rod Installation Guide: www.zarebasystems.com/learning...
Energized Fencing System Planning Guide: www.zarebasystems.com/learning...
How Electric Fencing Works: www.zarebasystems.com/learning...