Growatt 3phase Eastron CT zero export meter wiring, installation and configuration explaination

[@sajjadrashid5066]

very good explanation. I would like to see more on the CT configuration and where the value is written on the ct clamps

[@Solar-Sigma]

the CT in this video is 250A/40mA

[@engr.badariqbal3771]

Love from Pakistan. Thora lamba acha tha :)

[@asadalvi84]

Amazing described thumbs 👍

[@arFunGamer]

Can we do it without meter? Because there is option to select export limit by choosing CT option only

[@Gosach796]

S we can but the meter which we used is having cts that is y we opted for ct. The option which u r saying is different

[@jomardizon7784]

for other 3ohase inverter what number i will connect the comms cable in inverter

[@Solar-Sigma]

check the user manual.

[@ammarkhushnood358]

I have growatt three phase 15kw on grid inverter installed with SDM630-Modbus V3 as a zero export device. I have configured all the settings. Address is 0002 Telephone sign is visible Zero export limit to 0% As we have no net metering in our area so we used zero export device. But energy is still exporting energy to grid. I talked with growatt help-desk. They told me because you have three phase supply and your load is not balanced therefore device is not working properly. My question is How can I balance the load ? For example: if I put one AC of 1ton on each phase load is balanced. Right ? But how it’s possible I run all AC at one time to keep load balanced. Sometime I just use 1AC. how to solve this problem? Plz help

[@shaazy]

Same problem here. Grid meter is still consuming 20 units daily even though zero export device seems to be doing its job. Dont know how to counter this. It is eating away any and all savings!

[@jomardizon7784]

my inverter is 3phase 20kw growatt

[@baouabdel2787]

set Address has nothing to do with three or single phase. what a waste of time